Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

  • Type B1 non-contact sensor
  • UL325-2018 compliant
  • Lens-less design
  • Simple 2-wire connection
  • Relay contacts available
  • NEMA 4X enclosure
  • .......more details
DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
  • It is equipped with a NC or a NO relay
  • Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
  • Battery is included # CR2032
PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

  • Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
  • When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
  • Applications: rolling doors sectional doors and mass transit.
  • Electrical configuration: 3-wire SPDT
  • Temperature range: -20F to 158F
  • Max pressure: 20 PSI
  • .......more details
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

RP-3002

Rubber Plug

  • To plug end of 3002 gum hose
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
  • .......more details
3EBX

Explosion Proof 3-Btn Pushbutton Control Station

  • Not rated for division or class
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Dimensions: H=6-1/8" x W=3" x D=4-3/8"
EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

  • Gold coloured metal hood (1 hood)
IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

  • The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
  • The IRB-4X2 will work with any control board that accepts dry contact on the input.
  • The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
  • *Not for use in applications requiring UL325 compliance
  • Thru beam design is not affected by shiny surfaces
  • Wide 24˚ transmission angle allows easier alignment and increases reliability
  • .......more details
LC-36M

LiftMaster Light Curtain Monitored

  • The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
  • IP67 Water-resistant housing anodized aluminum corrosion resistant
  • Operating Temperature: -40° F to +140° F (-40° C to +60° C)
  • Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress
IS40

BEA Industrial Sensor Dual Technology Presence Detection BEA-10IS40

  • Combines Microwave Motion Detection with Infrared Presence Detection
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Can be mounted from 96" to 192" (8ft - 16ft) to fit application
  • Designed with NEMA 4 enclosure
  • .......more details
4X12SC50

Devanco Loop 4' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
LSGRY

Loop Sealant Cartridge Grey 29oz

  • Also available in black (LSBLK)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
1A3982

LiftMaster Operator Splash-Proof Cover

  • For models: MH H HCT GH
  • For wall mounted operators 31" L x 19" W x 18" D assembly required.
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details