Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Commercial Door & Gate Operator Accessories

Page:
Previous 456789101112 ... Next

LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

LMRT

LiftMaster Remote Test Plate

40-3505-FR

LiftMaster Warning Sign Aluminum French

LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

Lead probe ONLY. Requires the LRS-C1 detector
Three-dimensional presence detection of vehicles
Select X Y Z axis independently
Stand-alone sensor
Sensor stores ambient background and settings in non-volatile memory
Includes direct burial sensor and 100 ft of lead wire

.......more details

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

PMT20RI

Carlo Gavazzi Receiver Unit Only

PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
Normally open and normally closed output (no timer).
Adjustable sensitivity
The housing dimensions are: 25x65x81 mm
IP67.

Installation Manual

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
Randomly keyed

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

Monitored NEMA 4X enclosure through-beam type photocell
4-Wire
Suited for industrial environments
Range: 45 ft
Supplied with 3ft of wire

Installation Manual

S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator (Include (2x) SP20W12V Solar Panels (1x) K94-37236 Solar Harness (2x) A12330SGLPK Batt.)

Charges the gate access system battery using solar power
Ideal for remote and sunny areas without access to an AC outlet
Replaces the need for gate access system transformer
Can be mounted to almost any fence gate or post
Mounting bracket and hardware included
Contains (2) SOLPNL20W12V solar panels

.......more details

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder is replaced with BEST cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

02-409B

LiftMaster Key Switch with Best Cylinder

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with BEST cylinder (construction core included)
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

Page:
Previous 456789101112 ... Next