Devanco Canada - Get The Right Garage Door Opener‎ and Parts

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

Used on the BL229 gate op.

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

Activates one MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

SPRING-GALV-144

Torsion Spring Galvanized Wire Full Length Custom Order

Custom galvanized wire spring ordered to suit

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

Comes with two keys

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

REDUCER030

Manaras Reducer CC63-40D Frame 56

12501

Doorlec Clutch Plate Aluminum 4" dia x 1" bore

Works with models EHJ and ETBH

MOD130

Manaras Cogged V-Belt Upgrade

The standard v-belt is replaced by a cogged v-belt for added durability
Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
This is available only as an upgrade with the purchase of a commercial op.

GAL.262-258-144R

delete

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

BEARING006

Manaras Flange Sealed Bearing 5/8"

Flange sealed bearing for 5/8" shaft

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

218-45-10

PVC Connector for 3/4" - 3/32" RAH

BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

red replacement button for 8L5-OCS

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light (12 Red 12 Green)

.......more details

MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

Mild steel construction
Round head design 3/4" head
Standard hinge rivet

K72-12591

LiftMaster Clutch Shaft Kit HMJ

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

For door thickness 2"

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

Up-charge only

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

K1A6408

LiftMaster APE Kit 24V

For use with various LiftMaster® Swing Gate and Slide Gate Operators

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

K72-13912

LiftMaster Clutch Shaft Kit T GH

K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)

2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Curbside order part # 2705.148*180

31103

Doorlec Sprocket 41B36. KW/SS 1"

39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

Compatible with many of the newer Genie chain and belt drive openers.
New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MO00027

Micanan Clutch Spring 0.218 x 0.812 x 1" 4 Coil Zinc

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

2806.148.200

Whiting .148 x 2-3/16 x 20" Roadside with Cones

K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

120VAC 50-60Hz 36VDC 1.1A Output
Used on the LA400
Discontinued in 2018 use APOW3 instead

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

203928

Decorative Locking L-Handle with 2 Keys

Black powder coated zinc with crinkle finish
90 degree handle rotation
Blind mount installation 3.62" stem
Includes 2 keys and shaft clip

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

25-01426

Truck Door 1/8" Stainless 97" 1/4 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon ends are used on 1/4" eye cables

2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

MDT-2A

Linear 3-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

Custom made to spec

PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.437-514-R-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.421-6-L-C

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-6-L-C

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-334-R-C

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

.319-6-L-C

Cut-to-Length Torsion Spring .319 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.312-6-R-C

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.312-258-L-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-258-R-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.283-2-L-C

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.273-334-R-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-2-L-C

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-334-R-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.250-134-L-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-2-L-C

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-258-L-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-258-L-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

4X4PO50

Devanco Loop 4' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

PRO-GH-10053-PNL

Micanan 1 HP 575V 3P Gearhead Operator NO CONTROLS

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5053U-L

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5083U-R

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5083U-L

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5081U-L

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

FDRCARD

LiftMaster Option Card Solid State

PRO-HHD-5023U-L

Micanan 1/2HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

PRO-HHD-5021U-R

Micanan 1/2HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

MOTOR273

Manaras Electric Motor 3/4HP 208/480V 3Ph

Continuous-duty base mount ODP 60Hz
This item is compatible with BRAKE011

PRO-HB-5025U-LH

Micanan 1/2HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-LH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-H-7538-U-LH

Micanan 3/4HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login