Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Manaras
OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

SHAFT034

Manaras Clutch (Input) Shaft for MJH

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

  • For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410
BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

  • Does not include the solenoid
  • Replaces BRAKEPART012
T120

Manaras Trolley Track 20ft for 3/4HP & ALL APT models up-charge

  • For models MGT/OTH/OTBH/RTBH 3/4 hp only with Chain #41
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
    • .......more details
RSH-6114-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Left Hand

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
MIC001

Manaras Internet Control Device Modification (Op has to be compatible)

  • The internet control device allows you to control and monitor your garage door from anywhere using the MIC app and your smart device
  • Includes the MIC device and Wi-Fi compatible board & software
  • Must be purchased and used with a Manaras monitored operator
SHAFT036

Manaras Limit Shaft 5/8"-18x12

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

  • Continuous-duty base mount
  • This item is compatible with BRAKE011
OSH-6112-M-N1-LH

Manaras Opera-SH 1/2HP 120V 1Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
RELAY022

Manaras Socket Base for TIMER031

  • 8 pin base