Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2705.187_30

Whiting Curbside Torsion Spring.187 wire 2-3/16" ID 30" Long

Torsion spring wire only
.187 wire size

TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

Suitable for applications up to 55 feet wide and 35 feet high
Self-supporting channel steel C10 & flatbar mounting assembly
Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
Frame mounted thru-beam photoelectric sensor
High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
Door speed of up to 12 inches per second

.......more details

RS-40

Roller Shutter Aluminum Model 40 Made to Order Pricing by Quote Only

The RS-40 is designed for use in window roller shutters door recesses and small shopfronts.
These profiles are of better technical performance and are thus more stable.
At the same time good coil diameters allow to use this profile in small-size boxes.
The foam filling ensures good heat and acoustic insulation.
Its low weight allows the use of manual drives spring- or electric control devices.
The RS-40 profile is available with or without perforation in a wide range of RAL-like colours.

.......more details

10RD433

BEA Digital Receiver 433 MHz

Integral sequencing "learn" buttons (for vestibule sequencing)
Pulse/toggle functionality
Additional hold time
12-24V AC/DC
Max No. of Programmed Units Per Receiver: 100 Transmitters
Dimensions: 2 3/4" x 2 1/8" x 1"

.......more details

O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

33103

Overload 1.40 to 2.30A

Setting range 1.8-2.5A

RADIO-EM104

Manaras 4-btn 4-door Rolling Code transmitter SBC or O/C Function 390 MHz

2 operating sequences available: open/close or single button control (SBC).
Single button control (SBC) allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

LMLEVPACK-OB

LiftMaster Yale Smart Keypad Lever Oil Rubber Bronze Finish Incudes 821LMC

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Illuminated Keypad: Easily enter your code using the backlit keypad.
Brings Keyless entry to doors with no deadbolt
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.

.......more details

Programming instructions Sell sheet

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

10.1054.1

Truck Door Pop Rivet 1/4" ColdSaver/TempGuard Doors

Mild steel construction
Used in Cold Saver and Temp Guard doors

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

Used on the BL229 gate op.

CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

Complete assembly with bearings

LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

This will only work in the Pro LH operator.

D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

Removable wall mounting clip
Standard digital format: 256 selectable codes
Powered by one 9-volt battery (included)
Current consumption: 12 mA transmitting
RF frequency: 303.875 MHz
Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016

.......more details

SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

41D2052

LiftMaster LED Light Pod Replacement Kit

For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with WLED model
Same as # 041D2052

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

Hand crank for SL3000

OPE-S-1002

Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

14219

Doorlec Disconnect Arm LJH

25-42-190

Extension Spring 7' Door - 190 lbs Light Blue

Single - Loop
25" long 42" stretch 190 lb load
Sold individually
Rated for 10000 cycles

PRO-GH-7583U-R

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

RADIO-RE900

Manaras 1-Channel 24V Receiver Fixed Code Dip-Switch 313 MHz ** Replaced by RADIO-RE901

Commercial receiver controls one (1) operator (door)
Pairs with an infinite number of identical transmitters
practical learn button on front surface
Nema 1 enclosure
Retrofits to older generation fixed code Manaras transmitters and receivers. No need to change other devices
Compatible with most commercial operator brands on the market

.......more details

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

K001D8397-1

LiftMaster Power Board 3ph 575V L5

This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense

PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

Z9211-3

Stationary Cone Tool 3-3/4"

Easily dislodges the cone from the torsion spring

MV-00296

Micanan Wireless Push Button Station OCS for Logic 10.0

Used only on Logic 10.0 program 3.2.5

TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: (right) and (left) sides

.......more details

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details

785149

FAAC XP15B Photocells 15m Range 785103

Surface mounted security devices with 15 m range.
The kit contains: 1 transmitter and 1 receiver.
The photocell has a BUS system technology "2easy" for easy installation.

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

Sold in packs of 10. Priced per transmitter

LITH-9V

Battery 9 Volt Lithium

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

MK00707

Micanan Varistor Harness 110V with Black Wires

PMT20RI

Carlo Gavazzi Receiver Unit Only

PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
Normally open and normally closed output (no timer).
Adjustable sensitivity
The housing dimensions are: 25x65x81 mm
IP67.

SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

Custom spring made to order

PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

V-101-B

Vinyl Black Sold per Foot

Vinyl for 101-ALUM

Q013

LiftMaster Idler Pulley K75-50090

Toothless idler gear for use on SL 3000 operators
Includes bolt and sleeve.
Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

CP-CONT-SCHNEIR

Contactor Schneider 24V

Works on Lynx MCJH
Same as LC2 K12107B7 & MK00108
replace Riken Contactor

ER294-K

Heddolf Long Range Receiver 433 MHz

Up to 1500ft range
Compatible with EX220-1K

G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

For 1-3/4" thick door

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

1-piece rail

12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pins

Used on model LJH

CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.

SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

SPDT

71-90TS

LiftMaster Timer Kit for TS Wiring

Field mod. kit

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

226-9312

Lithium AA 1.5V Battery

Used in IG2 photo eyes

8587WL

LiftMaster Elite Series 3/4HP AC Chain Drive Wi-Fi Lock Garage Door Opener

MyQ® Technology now with Wi-Fi enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
P3™ Motors provide proven reliability and durability.
¾ HP AC Motor Chain Drive System is built to provide maximum power to lift the heaviest doors including carriage house and solid wood.
I-Beam Rail System and reinforced chassis with chain drive provides maximum support.
Security+ 2.0® safeguards garage access – with every click a new code is sent to the garage door opener ensuring the door does not inadvertently open.
Timer-to-Close automatically closes the door after a pre-programmed number of minutes.

.......more details

8587WL Installation-manual 8587WL Manuel-installation Sell sheet Brochure

ZT36640159

Rolling Steel Door Model 702 Firestar No 2 Slat 22-Ga

28773A

Genie Idler Pulley for Belt Drive

Fits PMX500-I B/C Belt & Chain drive model
Front Pulley for belt channel applications only.
Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
Part Numbers: 28773 28773AS 28773S 38773A

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

High strength steel roller designed for hurricane applications
Wheel Diameter: 2"
Steel tire Stem made from alloy steel
Rated: 15000 cycles for a 12'h door
Load rating: 75 lb
Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)

.......more details

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ** To Extent of Inventory

9 dip switch 315MHz transmitter
Compatible with Commercial operators L3 & L4
Visor clip and battery included (GP23A)

Programming Instructions Instructions de programmation

DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.

.......more details

Installation Manual

ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original
Cable drum and bearing

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

Same as K-SPLONG

41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

Same as # 41B6299 and 41D8615
Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
Door shaft collar RJO

37407

Doorlec Reversing Contactor BF9 24VAC

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

K001D8072-1

LiftMaster Single Phase Relay/Power Board (K001D8396-1)

For Logic 5 commercial operators
Same as K001D8396-1
014D1276E

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

Original TempGuard top seal used on Supreme body trucks from 2009
One piece rigid plastic cap retainer with a flexible vinyl seal.

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

165-A

Fusible Link For Loads 1 to 30 lbs

Length is 2.625" width is .875"
Distance between centers is 1.75"
Priced per each
Fire rated at 165 degrees Fahrenheit

37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

Compatible with Quiet Lift 800 DC Belt Drive models.
To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.

TH827-12V

Erone 7-Day Timer 12V

12V AC/DC input voltage with battery back-up
Form 'C' relay
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

Programming Instructions Instructions de programmation

1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

Fits into the bottom of one-piece 'Stanley' doors.
Sold per foot
2" wide

28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

Galvanized steel 14-gauge construction
Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
Holes drilled to allow for faster plug weld installation to frame
For use with 2" diameter steel or nylon rollers