Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Erone
7-10-1

Double Slide Lock

CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
  • 24 Volt accessory power
  • On board (372 MHz) receiver capable of programming up to 20 transmitters
  • External receiver connection
  • NEMA 1 Electrical enclosure
  • Adjustable friction clutch
  • Maximum Output Revolutions - 45
  • Primary Drive: Heavy Duty 4L V-Belt
  • Secondary: #41 CHAIN / SPROCKETS
  • Output: #50 CHAIN / SPROCKETS
  • 32 RPM output shaft speed
  • Door speed determined by the door system installed
  • Standard sprockets: Sectional: 50B12 x 1” bore to 50B18 x 1” bore OR 50B18 x 1 1/4” bore Steel Rolling: 50B12 x 1” bore to 50B24 x 1 1/4” bore
108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
871-ZAP

Zap Interface Expansion Module

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
106141

Marantec Shaft Adapter

K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
  • This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
  • Will also work on L3 L4 operators
111503.0002.S

Overhead Gear Reducer 40:1 RHX

K75-36260

LiftMaster Lock and Keys

  • For various Liftmaster commercial slide and swing gate operators.
746

Fasteners Ribbed Neck Track Bolt 5/16-18 x 3/4" Zinc 1000/box

111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

E/1929/235

Automatic Systems Axis 1.5" Ass'y w Bearings(BL229)

  • Used on the BL229 gate op.
  • Main pivoting shaft
TRANSF112

Manaras Transformer 575V-24V-50VA

36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
HW0429-RH

SteelCraft Commercial Bottom Bracket Right Hand Only

  • Right Hand bracket only
  • Can be used for both 2" and 3" tracks
  • To be used on door tracks that are installed wide enough to accomodate the side cable pulley
  • Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
  • Adjustable cable can level door from the ground
  • Heavy gauge steel construction
    • .......more details
SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included

  • Power: 115/208/230 VAC. Single Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
  • Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetWiring diagramWiring diagram 575V
41D2052

LiftMaster LED Light Pod Replacement Kit

  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with WLED model
  • Same as # 041D2052
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
K32-37560-3

LiftMaster Gear Reducer 28:1

  • This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.
CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

  • Same as #2-30-1
3500

Whiting Beverage Align Roller 1" Screw Type

  • A Whiting original
.393-6-L-C

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
PRO-GH-5081U-L

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 265
  • White #431 on reverse side
Colour chart
SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

  • 350g can
SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

  • 350g
25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

  • Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
  • Vehicle is now ready for roll-up door installation
  • Corner post has added lip length to allow easier weld during installation
  • Steel construction .125 thick
  • Each bulk kit includes two (2) corner posts and one (1) header
  • Plain finish
    • .......more details
60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
R5212

Pulley 5" Zinc Plated Clevis Pulley with Strap ** To extent of inventory

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long

  • Reinforcement bar 2-1/4"
  • 20G
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
KEYSWITCH019

Manaras Single Key Exterior O/C with Stop Button Return to Center Surface Mount

  • Cast iron end Tamper-proof
F310

Linear GTO Digital Keypad (Wired or Wireless)

  • As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
  • As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
  • The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
  • You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
  • After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
  • The keypad will not affect the auto-close setting of your gate opener system.
    • .......more details
50183

Doorlec Brake Assembly 575V

  • Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
  • For all V-belt driven models that have brakes
SL-310R

Skylink Universal Receiver 310 MHz ** No Longer Available **

  • This "Universal" Receiver guaranteed to work with any garage door opener regardless of age or brand (US & Canada only).
  • Works with Skylink Universal Transmitter: Model SL-310T SL-310T2.
  • Operates at 310MHz.
WEL-200

EMX Wireless Edge Link Transmitter / Receiver Kit

  • Provides a complete wireless solution for interfacing sensing edges with gate and door operators
  • The Wireless Edge Link eliminates the wiring between the safety edge and operator control box
  • No wiring needed reduces installation cost
  • Compatible with NC 10K and pulse monitored outputs
  • Operates two years on two AA lithium batteries
  • Connect up to 4 safety edge transmitters
    • .......more details
OCDFX1

Overhead Door 1-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX1.S GIDFX1.S
785149

FAAC XP15B Photocells 15m Range 785103

  • Surface mounted security devices with 15 m range.
  • The kit contains: 1 transmitter and 1 receiver.
  • The photocell has a BUS system technology "2easy" for easy installation.
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

  • Bolts to gearhead (c-flange) openers
Wiring diagram for 120VWiring diagram for 230V
50-HERK2

Hercules Microwave Motion Detector for Industrial Doors

  • Opens after sensing an object.
  • Can be set up to detect vehicles separately from people and bring the two signals to two different outputs
  • Or use the two outputs to differentiate between forward and backward movements
  • Detection fields are adjustable - manually or with a remote control (sold separately)
  • Can be mounted between 8.2' up to 23' with max range of 80'
  • Reference height of 23' and angle of 45 degrees
    • .......more details
PMT20RI

Carlo Gavazzi Receiver Unit Only

  • PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
  • Normally open and normally closed output (no timer).
  • Adjustable sensitivity
  • The housing dimensions are: 25x65x81 mm
  • IP67.
AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
  • It is equipped with a NCC or a NOC relay
  • Battery is included # CR2032
Programming instructions
ER294-K

Heddolf Long Range Receiver 433 MHz

  • Up to 1500ft range
  • Compatible with EX220-1K
8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

  • Free MyQ® Mobile App so users know their home is secure.
  • Built-In Wi-Fi® for the easiest way to connect the garage.
  • Real-Time Alerts indicate the status of the garage door via email or push notifications.
  • Monitors and Controls the opener from anywhere using mobile devices.
  • Belt Drive system for quiet maintenance-free performance.
  • Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.
    • .......more details
Installation manualSell sheetBrochure
BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4
  • Brake installed on operator
Installation manualManuel d'installationSell sheetBrochure
SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

  • Same as SN000099-30-2
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pins

  • Used on model LJH
CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

  • 19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

  • Wall bracket only
  • 4-1/2" projection
28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1-1/4" solid shaft with 1/4" keyway
    • .......more details
KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

  • Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
  • KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
  • Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
  • 250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • Zinc-alloy metal front cover for tough environments
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
CH900

Contact Cleaner 340g

  • Powerfull multi purpose contact cleaner and degreaser
  • Able to penetrate difficult to reach areas.
  • Cleans carbon deposits.
  • Removes dirt grease and other contaminants.
  • Safe on most painted and plated surfaces.
  • Suitable for contacts drivesmotors controls breakers switches telephones etc.
    • .......more details
Safety data sheetFiche de données de sécurité
20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for APT
  • Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
  • For L3 and L4
DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
Sell SheetDrawing
K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

  • Service kit to connect new LED arm to existing barrier gate
  • Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply
111854.0001

Overhead Logic Board for RSX 1/2 Hp 115V

  • Description: KITPCB1PH1/2HPSX/HXUL10
  • For RSX ad RHX models 1/2 Hp Single phase operators
Replacement Instructions
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

  • For door thickness 2"
CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
Z9965

Bearing Blaster

  • Fast and easy way to remove and re-seat bearings into bearing plates
  • Works for both 1" and 1-1/4" bearings
  • Instructions included
Instructions
15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
71-10345

LiftMaster RPM Sensor Board (MT only)

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

  • For temperatures below 32 F
  • Designed for use with Mega Arm Tower gate operator
  • Can be used for other applications as required
  • Heater operates when termperatures are below freezing
  • Plugs into a standard 120V outlet
  • 500 Watts with a circulating fan
    • .......more details
Installation Manual
.312-3-3/4-LH-C

Torsion Spring .312 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
Operating InstructionsSell Sheet
OSH-6534-ECB

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
7140251

FAAC Hydraulic Oil HP2 1 Litre *** Unavailable

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz

  • The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
  • Power requirements: 10 to 40 VDC 10-30 VAC
  • Output: dry relay contact N/O and N/C 1A @60VAC
  • Operating temperature: -40C to 60C
  • Maximum operating distance: 100ft
  • Electrical configuration: optional N/O or N/C
    • .......more details
Installation ManualSell Sheet
RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 *** To Extent of Inventory

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
    • .......more details
Installation ManualManuel d'InstallationSell sheet
CAR2U-RPTR

LiftMaster Lear CAR2U Repeater ** To extent of inventory

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochure
5463.96

Whiting Vinyl Top Seal 96" 1-1/2" wide

  • Original TempGuard top seal used on Supreme body trucks from 2009
  • One piece rigid plastic cap retainer with a flexible vinyl seal.
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

  • 20 AWG
  • Ideal for wiring CPS-RPEN4 photocells
PEDALU42

Aluminum Pedestal Post 42"

  • Pedestal post with hood
  • High quality aluminum
  • 42 inches
  • Dual face-plate allows for easy wire connections
Spec SheetShop drawing
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings