Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Commercial Door & Gate Operator Accessories
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

  • Tested and evaluated by UL and meet UL 325 requirements.
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
Installation manualManuel d'installationProduct guide
LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

  • Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
  • Versatile Solution for entrapment protection.
  • Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
  • Built-In Heater for dependable performance in most environments.
  • Increased Beam Angle for simple reliable alignment.
  • Versatile Gimble Bracket for fine alignment and adjustability.
    • .......more details
Installation manualManuel d'installationSell sheet
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
PMP12RI

Carlo Gavazzi Polarized Retro-Reflective Sensor

  • Range: 40 feet (12m)
  • Modulated invisible light polarized
  • LED- indication for target detected
  • NO and NC output
  • Suitable for exterior applications and harsh environments
  • Multi supply voltage: 12 to 240VDC and 24 to 240VAC 50/60Hz
    • .......more details
Installation Manual
RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
Installation manualsell sheet
PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

  • Suitable for exterior applications NEMA 4
  • Multi-supply voltage 12-240VDC 24-240VAC
  • LED indication for power supply and target detected
  • Not recommended for carwash applications
  • Operating temperature -25 to +55 C
  • Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
    • .......more details
Installation Manual
IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

  • Combines Microwave Motion Detection with Infrared Presence Detection
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • For lower mounting heights from 78" to 138" (6.5ft - 11.5ft)
  • Designed with NEMA 4 enclosure
    • .......more details
Installation manualSell sheetCut sheet
02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure part # XALD03H7
Sell sheet
EXTANT

LiftMaster Coax Antenna Connection Kit JF

  • For use on Medium-Duty commercial operators only
Installation manualManuel d'installation
CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

  • For use with sectional or rolling doors.
  • May be installed in areas exposed to rain or moisture
  • Rubberized for more durability
  • Will work on LiftMaster residential operators
Installation ManualManuel d'InstallationSell Sheet
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

  • Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
  • Operates on 12-240 VDC and 24-240 VAC supply voltage.
  • The PC50CNT20R has a 3 amp relay output
  • Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
  • Same as Albany 4904R0007 / PC50CNT20RP8M1370
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
AW-14

Miller Edge Air Wave Switch in ABS Box

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Molded enclosure
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
    • .......more details
Instructions ManualSell Sheet
3002-CUT-LENGTH

Gum Hose 1/2" ID Sold per Foot

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

  • This is a Current Sense Harness (230/460/575V) Replacement Kit.
  • Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
  • Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
  • Models manufactured before February 2016 DO NOT feature current sense technology.
  • We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
  • Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V
    • .......more details