Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
1-4-3

Spring Extension Clip Medium-Heavy

PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

MP-00095

Micanan Wiring for Quick Close Feature Modification

  • When a door is fully open if photocell or loop is activated then cleared the door closes immediately.
  • Available modification on R M only
15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

  • Same as 15-41B14LGF
38C

Skylink 1-Button Universal Remote ***NLA

  • Easy to carry or clip on sun visor.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
7-6095

RW Hanger 323 For use with #31 track

  • Wheels: 2-1/8" diameter Formed Steel
  • Apron: Formed steel vertically adjustable 5-3/4" long x 3-1/2" wide
  • Pendant: 1/2" diameter Steel
  • Door thickness: 1-3/4" inches to 2-1/2" inches
  • Included: 1 carriage bolt 2 flat head stove bolts
  • Capacity: 1 pair for a maximum of 400 lbs
    • .......more details
37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

XR-1

Linear Single Channel Mid-Range Receiver ** Discontinued

  • 1-channel mid-range receiver
  • Up to 10 miles line-of-sight range (with XT-1 & XT-4)
  • Up to 2 miles of line-of-sight with handheld devices
  • Over 64 000 codes
  • Weather-resistant case
  • RF frequency; 27.255 MHz
    • .......more details
CH100

Contact Cleaner and Lubricant 325g

  • Cleans both electrical and electronic parts.
  • Cleans dries and leaves a thin protective film.
  • 340g / 11.5 oz spray can
  • 12 cans per case
Safety data sheetFiche de données de sécurité
Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

  • 3" Straight Key
  • Stainless Steel
.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
9234001.003

Overhead Clutch Shaft Assembly with Double Pulley SFL

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

  • For PRO-LJ LH LHAB
ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
GAL.250-134-33L

Galvanized Torsion Spring .250 x 1-3/4" x 33" LH with Cones

  • Made to order
12141

Doorlec Brake Caliper Assembly

PRO-HHD-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
18002

Doorlec Reducer #80

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
P220-1K

Heddolf 1-btn Transmitter 8-Dip Switch 318 MHz

  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver
28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
D22

Allen Bradley 110V Reversing Contactor

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

  • Pin packaged set consists of 50 x 1/4" pins only
  • Steel construction Zinc plated
VL-450-LED

Versa Light Dock Light Model 450 LED 42"

  • Easily Positioned
  • Durable Construction
  • Shock/Vibration Resistant
  • Fan Cooled
  • Circuit Breaker Switch
  • Grounded Plug
    • .......more details
37558R

Genie Belt Drive Sprocket Assembly

  • Complete assembly for the belt sprocket on top of the machine.
  • Works with the following models: IntelliG 1200 and IntelliG 1000
HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
CP-BRC-12

Lynx Resettable Circuit Breaker 12 AMP

  • Used on MCJH 3/4 hp 120V operators
JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
Sell sheetTechnical document
JDMG-LG-BBU

GDI Battery Backup Option G3243

  • Battery Backup option for JDMG-LG operator
M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
CR-2

Battery CR2 3V Photo Lithium Battery

  • Camelion brand
7543.2

Whiting Bottom Panel with Seal & Channel TempGuard 13-5/16" x 95-1/4" FPW

  • Replacement for serial # 164352
.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

  • Reinforcement bar 3"
WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
3011-1-25

Aluminum Flat Slat Adapter 25 ft

IRB-MON-RX

EMX Monitored Receiver Board Only

  • Receiver board only for IRB-MON
PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

  • Knurled shank
  • Max torque = 6
TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

  • Custom order to customer's needs
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***No Longer Available***

  • For 9000 series photo switches
MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
SA-TORSION-ASSY

Complete Torsion Assembly Special Order

  • Special order
1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-10FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
3-42-2B

Bottom Bracket with Removable Roller Carrier Commercial 2" & 3" 2-Hole BB-6 Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Sold as a pair (1-left and 1-right)
  • 13-guage
  • Dimensions: 4-9/16" W x 11" H
  • For 1-3/4" door
L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

  • Ultraviolet Resistant
12-2125

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

  • Fits SW490GL swing gate
41ACOM12001

LiftMaster Capacitor 32UF 230V **DISCONTINUED

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 562
  • Reverse side is #431 Bright White
Colour chart
MEA2

Nice Key Unlock System for Metro Gate Op.

  • For underground gate operator
6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

  • This is a Whiting original part
MG00030

Micanan Limit Cam 1/2-20 UNF

  • Sold seperately. 2 required per operator
41A6569

LiftMaster Safety Sensor Mounting Kit

  • Replacement brackets only for 41A4373A safety eyes
36451A

Genie Front Idler Assembly 36451A.S *** NLA

  • Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

  • French description: Ensemble ressort 06/04
  • For model BL27 gate operator
CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

  • Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
  • Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
  • MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
  • Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
  • Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
  • Keyed manual disconnect when unlocked allows gate to be operated manually.
    • .......more details
Installation manualManuel d'installationSell sheet
H12G12-SS

Hinge #12 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications
16-4L290

LiftMaster Cogged Vbelt 4L 29"

26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

374UT

LiftMaster Universal 2-btn Mini Transmitter

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • This mini remote is NOT compatible with DIP switch remotes or receivers
Programming instructionsSell sheet
50180

Doorlec Brake Assembly 120V

7119405

FAAC 400 Plug for End Cap

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

  • Same as G172701
CABLE_1/8SS5000

Cable 1/8" 7x19 5000' Stainless Steel ** Price on request

MC824H/V1

Big Metro MoonClever Control Box 110VAC

102079

Flange Plate PFL6Z PFL206

  • 2 required per bearing # 101475
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

  • Continuous-duty base mount
  • This item is compatible with BRAKE011
109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

PRO-H-FRAME

Micanan Frame for PRO-H

CP-LX700

Lynx 1-btn Transmitter 372 MHz for Commercial Op with UL325 Board

  • Works on the UL325 commercial operators
  • Not compatible with the 372HMz residential operators
  • Works with on-board receiver on Lynx UL325 operators
  • Currently no external receiver compatible with this transmitter
Programming instructionsInstructions de programmationCompatibility chart
MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

  • Same as K79-16088
K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

  • Kit includes: Compression spring Cotter pins and Bearing
MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

  • Auxiliary device logic board
  • Controls red/green lights
  • Provides Normally Open dry contacts for fully open or close positions
  • Normally Open dry conatcs for door opening or door closing cycle
  • Works on circuit boards: MK00641 MK00642 MK00701
  • Includes installation hardware
    • .......more details
Instructions Manual
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
R5996

Shaft Collar 1" Split

MGH-6113-ECB-RH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation ManualSell Sheet
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet