Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
COLLAR002

Manaras Steel Collar 0.375" ID

KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
MD-00111

Sprocket 410B9 X 3/8" No Keyway 2 SS 10-24

30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
LITH-9V

Battery 9 Volt Lithium

28103

Pillow Block Bearing Cast Iron 1" Bore

ME00026

Micanan Limit Shaft 1/2" x 11" PRO FDG

PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
T-931-MH

FL-Heddolf 1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

  • Keystone-Heddolf miniature 1 button transmitter 311mhz
  • 12 volt battery and keychain included
  • (9) 3-position dip switch format
  • Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
Programming instructions
333857

Wayne Dalton T-Style Weather Seal Sold per Foot

  • Used on garage doors and mini storage doors
  • T = 7/16" wide – .438 Bulb is 7/8" x 7/8"
1A4324

LiftMaster Steel Angle Hood Mount Bracket

  • Heavy-gauge steel bracket used for vertical or horizontal mount for either front or top of coil mount.
  • May be welded.
  • For use with LiftMaster Model DJ DH MGJ GH J and H.
  • Cannot be used with Model GH 3HP.
PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
    • .......more details
PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
  • Chain can be adjusted for smaller doors
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation manualManuel d'installationSell sheet
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pins

  • Used on model LJH
MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
Installation manual
CSW24UL

LiftMaster 24VDC High Traffic Commercial Swing Operator

  • 24VDC swing gate operator with battery backup
  • Heater NOT included. Heater sold separately # HTR
  • Continuous-duty motor with soft start/stop
  • Receiver holds up to 50 remotes
  • Power: 115V or 220V Single Phase
  • Built-in surge protection
    • .......more details
Installation ManualSell sheetBrochureSite plan
15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

  • Same as 50B12x1
WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

  • Visor Style (comes with visor clip)
  • Green Indicator Light
  • Size: 2-1/4"" x 3-1/2"
  • Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
  • Same as models: 3910 02-3047-3BUH 297132
Programming Instructions
71-90TS

LiftMaster Timer Kit for TS Wiring

  • Field mod. kit
OTBH-6213-AE05

Manaras Trolley Operator 3/4 HP 240V 1Ph with Elect. Circuit Board Apt. Model

  • A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 30 cycles per hour 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

  • Same as PFL6Z. Bearing flangette only.
  • 1-1/4" press fit
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

  • MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices
SPECIALPANEL001

Manaras Complete C-Box Special Order

  • Includes limit system limit shaft.
37030A

Genie Motor Assembly DC

  • Works with Genie ReliaG 800 2022 2024 and 2042
  • Replacement powerhead motor assembly
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

  • 3 preset voltages: 6 12 and 24 VDC
  • Full adjustment from 2 to 24 VDC if required
  • Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
  • Maximum 1 amp. Output at 70 deg. F and free air
  • Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
  • Regulation: 97.5%
    • .......more details
Wiring DiagramDiagramme de raccordementSpec SheetSpécifications
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

26966D

Genie Chain Pulley

  • Front idler pulley for full chain models ie..PMX500
  • Fits a T-rail
  • Diameter: 2-3/8"
  • 7/16” bore
  • For use with t-style rails
BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
    • .......more details
14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
G658056

LiftMaster Counterweight for BG790 Arm

  • For 17' gate arm and up
  • For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
  • Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

  • 22 gauge
  • Max size: 18'4" max std. width 20'4" max std. height
  • Slate type: Curved
  • Finishes: Gray White Tan Brown or Galvanized
  • RAL Powder coat option in 188 colors
BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

  • Rating: 2200 lbs max per door
  • Use with: 3" straight track
  • Aluminum bracket with zinc plated hardware
  • Sold as a pair (includes one left and one right).
LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

GH501-L5

LiftMaster Gearhead with Brake 1/2HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: DM413 DNS 4-13 OMI 2100.
    • .......more details
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
RBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
41A6388

LiftMaster Split Coupling (41B6299 / 41D8615)

  • Same as # 41B6299 and 41D8615
  • Compatible with all Liftmaster 3800 3900 & 8500 Residential and Commercial Jackshaft Operators.
  • Door shaft collar RJO
SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

  • You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
  • Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
  • Works with any 433 MHz Erone receiver
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

  • Approx. 8" long
EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

  • 7/16" head
  • Serrated
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

  • Replacement door size between 96-1/4" - 98" wide x 90-100" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

  • Compatible with Quiet Lift 800 DC Belt Drive models.
  • To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.
HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

  • All 2006 or older vehicles require a repeater kit installation
  • In 2007 and newer if the HomeLink does not program with opener install a repeater
  • The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote
Programming Instructions
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
PROMI-500 Wiring Diagram & Instructions
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
Installation InstructionsInstructions d'installation
36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

  • For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
  • 24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
  • Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.
20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

  • Replacement motor for SL595
SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

  • High gain superheterodyne receiver
  • High RFI immunity
  • Supplied with F-connector whip antenna and mounting bracket
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

  • Compatible with Allstar and MVP receivers
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
1086090001.S

Overhead Drive Gear for Overhead 556

  • White plastic gear only for Overhead model 556
STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
  • Works on a tri-band frequency
Programming InstructionsSell sheet
MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
TUBE_SHAFT_17FT

Hollow Shaft 1" x 17-0" Galvanized 16 gauge

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

  • Commercial Through Beam Photo Eyes includes:
  • 50-15514 I/R Emmitter
  • 50-15515 I/R Detector
  • 77-16011 Hardware Kit N4-CPS
  • 001C4629 CPI Housing Assembly
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
    • .......more details
Installation ManualManuel d'installation
GK-BX

Genie Dual Frequency Wireless Keypad 37224R

  • Temporary PIN codes to allow for one time special access needs
  • Able to operate up to three Genie Intellicode garage door openers
  • Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
  • Compatible with Intellicode 1 and Code Dodger series
Programming Instructions
8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

  • Height adjustable
  • Vinyl: White
  • Length: 3 ft
24858

Capacitor 220/250VAC 53-64MFD

  • Motor start capacitor for 1/3 & 1/2HP garage door openers
  • Same as part number 219110
  • Dimensions: 1.810" D x 3.38" H x 0.50" C
NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
Installation ManualSell Sheet
881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

  • Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
  • Equipped with the Maintenance Alert System
  • On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
  • Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
  • Displays Fahrenheit or Celsuis
  • Motion detector automatically turns on garage door lights when movement is sensed
    • .......more details
Installation ManualManuel d'Installation
9V-1/PKG

Battery 9V 1-Pkg Alkaline Duracell Procell

41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

  • This receiver is included in a JIC box.
  • Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107478
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
890MAX

LiftMaster 3-btn Mini Transmitter Security+ 2.0

  • Can be used as a replacement remote control for 80 Series 970 Series and 370 Series LiftMaster remote controls.
  • Compatible with 315 MHz or 390 MHz garage door openers manufactured after January 1 1993.
  • For use with gate operators commercial door operators or other products that are 315 MHz or 390 MHz and have a Learn Button.
  • Includes 3V battery (CR2032)
  • Same as 953CB
890MAX Manual
.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
22-120

Brake Solenoid 115-120V

  • Used on all brands of commercial door and gate operators
  • Same as Solenoid001
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 3 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
RP-SW-LIMIT

Lynx Limit Switch for old model 455

  • Limit switch for old Lynx 455 with metal cover
CP-SW-AT

Lynx Single Limit Switch

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
RADIO-EM103MD

Manaras 3-btn transmitter configured as 3x single-btn Multiple Doors Rolling Code 390 MHz

  • Open/Close remote for 3 doors
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
DR4

Linear 4-Channel Delta3 Receiver 310 MHz

  • Activates four devices or UP DOWN STOP for one commercial device
  • 310 MHz 8 dip switch
  • Power: 24 VAC/VDC
  • Dimensions: 4.9" W x 4.2" H x 1.3" D
  • Same as DNR00023A or DR4V
Programming Instructions