Devanco Canada - Get The Right Garage Door Opener‎ and Parts

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

Operating Instructions

SOFT_EDGE-ENDCAP

Devanco Canada Soft Edge End Caps Sold Individually

MOTOR273

Manaras Electric Motor 3/4HP 208/480V 3Ph

Continuous-duty base mount ODP 60Hz
This item is compatible with BRAKE011

K77-34846

LiftMaster Hardware Kit SL575 SL585 SL595

BEA-10T300PB

BEA Wired Transmitter Push Button No Case 300 MHz

��300MHz Analog Flag Connector Transmitter
For All Activation Plates Except Jamb and Vestibule 9V Battery
10 dip switch access code programming
Operating temperature: -10 to 55C

LA412DCS

LiftMaster Secondary 12VDC Solar Actuator Arm for Dual Swing Gate Applications

Installation manual Manuel d'installation

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

LC2K1210B7 mini contactor

ALUM-509

Aluminum 24" x 100' Spool Midnight Surf / Vagues de Minuit # 509

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 509
Reverse side is #431 Bright White

Colour chart

8165W

LiftMaster 1/2 HP AC Chain Drive Wi-Fi ***No Longer Available

Comes with 1 893LM remote and 1 882LMW multifunction control panel
1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
Energy-efficient operation consumes up to 75% less power in standby mode.
Built in Wi-Fi for the easiest way to connect the garage.
Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
PosiLock® locks down your garage door by electronically monitoring against a forced opening.

.......more details

Installation manual Sell sheet

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00304

Micanan Wireless Key Switch

MV-00008

Micanan 2-btn O/C Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic

PRO-H-5083U-LH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

DM-100

Skylink Swing Door Opener with Electro-Magnetic Lock ***NLA

Can be installed on most doors including wood and metal doors.
Hit and Stop feature ensures safety operation.
Fail safe operation - Door can be open/close freely during power outage
Optional audio warning as an indication when the swing door opener is operating
Can learn up to 16 remote controls

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

.421-514-R

Cut-to-Length Torsion Spring .421 x 5-1/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-J-7553-U-RH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7583-U-RH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

Connects to wireless edge receiver using low-energy Bluetooth transmission
Sensing distance up to 130 ft
Transmitter accepts up to 2 wired resistive edges
Battery life 2 years
NEMA 4X rated
Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges

.......more details

Installation manual Manuel d'installation Product Guide Guide de produit

PRO-J-7521-U-LH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-5011-U

Micanan 1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 507
Reverse side is #431 Bright White

Colour chart

PRO-APTB-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

Wall mounting
4:1 reduction
Maximum pull allowed on hand chain is 35lb
Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch

Sell sheet

MD-00004

Sprocket 410B12 x 1" 1/4" KW 2 SS 5/16"

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

MK-00055

Micanan Transformer 575V-24V-50VA

Fingersafe

MK-00033

Micanan Transformer 575V-24V-40VA

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

E/1929/031

Automatic Systems Installation Plate Ass'y BL229

Used on the BL229 gate op.

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-14

Laminated Bumper Standard Black 12" x 14" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

HINGE-711-PCG

Powdercoated Hinge #7 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #7 - 0.87 lbs
Powdercoated Grey
For use with 7/16" stem rollers

27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

Frame size is 56

9-10-2

Lynx Hand Hoist Chain Zinc Plated 26ft / Bag

Zinc plated silver chain

HAE00057

Linear LDCO Motor with Encoder

For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.

Z9211-3

Stationary Cone Tool 3-3/4"

Easily dislodges the cone from the torsion spring

MM-00035

Micanan Chain Keeper

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

Double - Loop end for strength
25" long 42" stretch 260 lb load
Sold individually
Rated for 10000 cycles

CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

Not for use in aircraft applications
Type: T304

IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only *** No Longer Available

Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Black powder-coated finish
Will NOT fit the new IRB-RET UL325-2018 units

H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

VWS-34-DARK-BRWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Commercial Brown

Pan head
S point

STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

9006-08

Excalibur Threshold Kit 8'2" x 6" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

82424

Marantec Power Board for RV- 8000 & LC-1000 Models

K75-12584

LiftMaster Complete Brake Assembly GH 115V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls and set up Wi-Fi directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

19051

Doorlec VBelt 5L370

works on model ETBX

BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

Sold as a pair (includes one left and one right hand)
Same as BB-5 LHR Reinforced

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

1-4-3

Spring Extension Clip Medium-Heavy

MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

.283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

TRACK-3"-RAW-14

Raw Vertical Track 3" 14'-0" Sold per Piece

7232

Whiting Spring Spacer 38-1/4" Long for 2-5/8" ID Spring Wire

For use with #7176 balancer

MOUNTSHAFT012

Manaras Clutch Shaft Kit for MSJ

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

GM-809

Gear Master

Holds shaft assembly for easy removal of roll pins
Makes changing gears easy

VBELTB30

Manaras VBelt 5L 30" Type B (5L330)

For models OTH OTBH OSL
Same as 5L330

MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

Friction clutch mounted in between motor and reducer flange
Comes with cover and studs
New part number MP00232

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

��This item is compatible with BRAKE011

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

Q013

LiftMaster Idler Pulley K75-50090

Toothless idler gear for use on SL 3000 operators
Includes bolt and sleeve.
Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

JDMG-LG-BBU

GDI Battery Backup Option G3243

Battery Backup option for JDMG-LG operator

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

Reinforcement bar 3"

K001C3196-3

LiftMaster Antenna 315MHz

Fits SL595

BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

Industrial Duty Hoist Operator with Damp Environment modification
External brake included
Comes with CPS-UN4 photoeyes

Installation manual Manuel d'installation Sell sheet Brochure

MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

Knurled shank
Max torque = 6

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

Wall bracket only
4-1/2" projection

783

Fasteners Hex Head Bolt Gr 5 3/8-16 x 1-3/4" 650/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

GL-24-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light

.......more details