Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8034

LiftMaster Female Rod End LH

  • Upper rod end for BG770 BG790
  • Same as part # 12-8034
K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

  • Standard 1/2 hp motor
  • Same as 20-3033-1
PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

  • Anchors only. Set of 4
60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

  • Wall bracket only
  • 4-1/2" projection
HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

  • Heater kit for pad mount 460V AC gate operators.
  • Includes transformer
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
28-00290

Truck Door 1" Std Vert. Track and Angle Assbly Roadside (LH) 96.5" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
    • .......more details
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
KH-3.5

Magnetic Key Hole 3-1/2" Tall

  • Decorative key hole only
  • Black flexible magnetic material with deep embossed design
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
H12G10-SS

Hinge #10 x 12 gauge Stainless Steel **NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
2B735

LiftMaster Main Board EL25 (041B0735)

  • Same as 041B0735
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

  • For gate op. SL580-5011
11202

Doorlec Cap Screw 1/4"-20 x 4"

CABLE008

Manaras Disconnect Cable 25 ft

  • Cable 3/32"
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
41A4813

LiftMaster Chain Pulley Bracket Kit

  • Fits chain drive models
41A7920-1

LiftMaster Hardware Kit

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet
8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

  • An original Whiting assembly
SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1-1/4" solid shaft
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
10-3209_GATE_BRKT

LiftMaster Gate Bracket

  • Fits SL580GL SL595GL and new IHSL24UL INSL24UL models
1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

OSH-6233-CONT-L

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
    • .......more details
Installation ManualSell Sheet
9150000620

3/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

  • For models: SL595-200-53
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
GUIDE014

Manaras Chain Guide

4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

  • If MJH is manufactured prior to 1998 4 x PIN016 are required
  • If MJH is manufactured after 1998 2 x PIN016 are required
  • PIN016 sold separately
MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

  • Complete brake assembly including 460V solenoid
  • Solenoid cover is sold separately # MM00011
27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

  • For 1/3 HP and 1/2 HP operators only
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
39-10167

LiftMaster Clutch Disc for MH

K75-12492

LiftMaster Brake Kit 115V Units MH

H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
SLT2-20P

Rolling Steel 2" Crowned Slat 20-ga Primed

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 ***NLA

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 6" Length: 12 ft
.363-6-LH-C

Torsion Spring .363 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 6" Length: 12 ft
.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 6" Length: 12 ft
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.331-2-5/8-RH-C

Torsion Spring .331 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.312-6-LH-C

Torsion Spring .312 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 6" Length: 12 ft
.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
.306-6-LH-C

Torsion Spring .306 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 6" Length: 12 ft
.295-6-LH-C

Torsion Spring .295 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 6" Length: 12 ft
.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 5-1/4" Length: 12 ft
.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 3-3/4" Length: 12 ft
.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2" Length: 12 ft
.243-2-RH-C

Torsion Spring .243 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 2" Length: 12 ft
.234-2-RH-C

Torsion Spring .234 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
.218-2-RH-C

Torsion Spring .218 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.