Devanco Canada - Get The Right Garage Door Opener‎ and Parts

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1104-7FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 7' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg ** To Extent of Inventory

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

Signals if door is moving or stationary
Compatible with model HCT

Installation Manual

71-65WTC

LiftMaster Weatherproof Case

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

580LM

LiftMaster Alternate Power System RJO Interface

Exclusively for use with Wall Mount Opener model 8500
Makes installing the Wall Mount Opener model 8500 easier when an outlet is not available within 6 feet
Puts power right where you need it and removes the need for an electrician
UL-approved
Includes transformer box interface box 35 feet of low-voltage wire and all required mounting hardware

Installation Manual Manuel d'Installation

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

2705.171_250

Whiting Curbside Torsion Spring 2-3/16" ID 25" Long

Torsion spring wire only
.171 wire size

21-10298

Transformer 100VA

Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
Fused at 5A

K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 *** NLA Replaced by H24

Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

510.1000.00

Whiting Premium Topcoat Paint Option White

Option for Dry Freight Doors

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

13-3510*

LiftMaster Chain Guide ***NLA

This is NLA as a part by itself but may be purchased in a kit K75-18493

91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

Fits SL595

36179R

Genie Traveler Assembly for Screw Drive

Fits model 3060 L/M
Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

DS-KIT

Linear Single Delta Radio Kit ** Discontinued

Kit includes one DT transmitter and one DR receiver
Same as: DNP00011
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Installation Manual

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

12 tumblers provide double locking action
Self cleaning barrel weather-resistant aluminum plate
Cannot be shorted out from exterior with key
One "NO" contact used to activate the door operator
Includes two keys

Installation Manual

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

19-50ML-NP

Master Link #50 Nickel Plated

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

For door thickness: 1-1/4"

1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

For door thickness: 1-1/4"

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

41A7756

LiftMaster End Panel with Light Socket for 8557

95LMC

LiftMaster Keyless Entry Transformer

2-wire hook up
110VAC Input 22 VDC 2-Wire Connection

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

SHAFT023

Manaras Intermediate Shaft for MJ operator

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

Plastic channel attaches to the T-rail
Hides up to 3 pairs of wire
Each piece is 5ft long
Box quantity of 100

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

Works with Chamberlain (LiftMaster) Garage Door Openers
Easily connects with two wires to the photocell terminals of the opener
The Laser light turns on as you drive into the garage
Simply Adjust the light to a specific spot on the dash

Installation Manual Manuel d'Installation

82-PX10-28

LiftMaster Screw 10-32x28

10-10355

LiftMaster Solenoid Link

.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

C-200-INSTALLED

Cones 2" Factory Installed (Pair)

For do-it-yourself installation use part no. SF200

.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

Reflector (ER4) not included

Installation Manual

41A7562

LiftMaster Light Lens for 8360 8550 8355

Replacement light lens

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

I-Beam Chain Drive Rail for model 3595

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

Tri-Code series 2 channel transmitter model TC-2
300 & 310 MHz simultaneously
Each channel can be set on a seperate code format
Works with both 8 and 10 dip switch systems
Replacement: 380UT

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

.283_6"-LH

Torsion Spring .283 x 6" x 12ft LH White

Wire size: .283
Inside diameter: 6"
Length: 12 ft

.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.468_3-3/4"-LH

Torsion Spring .468 x 3-3/4" x 12ft LH Blue/Orange

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 2-5/8"
Length: 12 ft

.207_2-5/8"-LH

Torsion Spring .207 x 2-5/8" x 12ft LH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-LH

Torsion Spring .306 x 2" x 12ft LH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.243_2"-LH

Torsion Spring .243 x 2" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

.192_1-3/4"-LH

Torsion Spring .192 x 1-3/4" x 12ft LH Silver

Wire size: .192
Inside diameter: 1-3/4"
Length: 12 ft

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

Caulking gun for LSBLK / LSGRY

41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

For models: ATS211X ATS2113X
For older model ATS211 use part number 41C4470

Installation Manual Manuel d'Installation

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

23-2017

LiftMaster Limit Switch SPDT

T-53-S

FL-AllStar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

This remote can control (open-close-stop) up to 27 doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 535T (190-107475)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8"

Programming Instructions

T-733

FL-AllStar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

This transmitter can control (open-close-stop) up to three doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 733T (190-107477)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

T-833

FL-AllStar 3-btn 3-Door Transmitter 108817-311 MHz

This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833T (190-108817)
Dimensions: 4 5/8" x 2 1/4" x 7/8"