Devanco Canada - Get The Right Garage Door Opener‎ and Parts

OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

Installation Manual

10TD900TR

Transmitter 900mhz Touchless Wireless Converter

Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
Microwave doppler technology allows for consistent and reliable detection.
For automatic door apllications.
Compatible with 10RD900 and 10BR2900 receivers.
IP65
Nema 4

.......more details

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

Also known as ARB or ORB brackets
Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)

MD-00033

Roller Chain #60 10' per Pack

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

For use with various LiftMaster® Commercial Door Operator Models

19-50HL-SS

Half (Offset) Link #50 Stainless Steel

For #50 chain

K41-0083-000

LiftMaster Bridge Rectifier HD Gates

For use with various LiftMaster® Heavy Duty Commercial Slide and Swing Gate Operators (HDSL24UL & HDSW24UL)

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

HW0777

Low Headroom Quick Close Device 3" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

70598.000

Todco 1" Nylon WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Installation Manual Specification Sheet

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

XF208VAC7

LiftMaster 208V Transformer Kit 700

MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

Magnetic striped cards
Track II encoded
Low-CO magnetic stripe
Sold in lots of 25
Same as: 0-200025

2200-886

Linear Sprocket 50B20 1" Bore

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

2200-015-UPS

Linear Collar Set 1B 9/16 LTB

XBA3HF

NICE L/MBAR Control Logic Board Hi Frequency (SPXA3HF)

Exactly the same board as XBA3/U just rated for higher cycle per hour because it has a built in fan on it.

GH755L5-LH

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

Replacement motor for SL595103U and SL595103UL

LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

CP-ENGAGE-SLIDE

Lynx Engaging Slide CDJ/MDJ

GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

K72-34845

LiftMaster Clutch Shaft Kit SL575GL

40655R

Genie Garage Door Opener LED Bulb LEDB2-R 1/Pkg

LED: Long life low energy
Universal - works with all major brand garage door openers.
Eliminates or reduces remote interference.
Vibration and shatter-resistant up to 5Gs of shaking force.
Light appearance: 4000 K (neutral)
Brightness: 800 Lumens

.......more details

9-14-1

ARB Bracket 18-24" Adjustable Zinc Plated Half Hinge

Also known as Operator Reinforced Bracket

GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Operating temperature: -22 to 140F

.......more details

Q079

LiftMaster Trolley Body Kit K75-50137

For Liftmaster trolley operator HCT

DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

torsion spring for cube trucks with small roll-up door
Specs: .143 x 2-3/16" x 15" Long
For Roadside order part # 2704.143*150

OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

SA1929/A51

Automatic Systems Board w/Battery Assy for BL229

CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

OSH-6534-M-N1-RH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MOTOR481

Manaras Electric Motor 1 HP 600V 3PH TEFC Brake ** Special Order

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

185002

Marantec Maveo Bluefi Stick

The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)

BEA-10-IXIO-DT1

BEA Sliding Door Sensor

Dual technology motion and presence sensor combining microwave activation and infrared presence detection for the automatic sliding door industry.
This solution is highly flexible and user-friendly for sliding doors industrial doors vehicle gate detection and off-door automation.
Precise Presence Detection: Two 24-spot high-density infrared safety curtains providing precise presence detection
Easily Adjustable: Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
Standards Compliant: Fully monitored internally capable of external monitoring
Operating temperature: -13 to 131F

.......more details

10-8055

LiftMaster Counterweight Clamp for BG790

Also known as: G108055

MYQ-SGC2WLM

LiftMaster Smart Garage Camera

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

DM54-COATED

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs
Maximum cable diameter: 3/16"

.......more details

OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

DS100-SHEET-DOOR

Wayne Dalton Roll-Up Sheet Door Light Commercial ** Price by Quote Only

Sheet Door Made to Order
Round panel profile continuous curtains constructed of 26-gauge hot-dipped galvanized steel with a silicone polyester paint finish
Automatic door stop prevents the curtain from rolling up past the header
Heavy-duty steel axle supports door curtain and counterbalance system
Oil-tempered steel springs are engineered to counterbalance the doors providing for smooth easy operation and cycle performance

345.000

Whiting Tongue & Groove Bottom Panel Assembly with Seal/Channel Made to Order. Price on Request

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

OTBH-6213-1-M-N1

Manaras Trolley Operator 3/4 HP 240V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OSH-6233-M-N1-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OSH-6113-M-N1-LH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

Technical information

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

K94-37695

LiftMaster Electric Motor 1/2HP

Replacement motor for SL585503U

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

236-110

Serco 3/4" Klip Ring ** Price by Quote Only

For Serco loading docks

41D0598-1

LiftMaster U Bracket Adaptor

Also known as: 062314 12D598-1 12D598 41D598-1
For use with various Chamberlain® Belt Drive and Chain Drive Garage Door Openers and square rail assemblies

VBELT_4L270

VBelt 1/2" x 27" (4L270)

V-Belt not cogged

K10-37598

LiftMaster Cover HCT

For use with various LiftMaster® HCT Series Overhead Gate Operators and Perimeter Access Solutions

K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

K94-34778

LiftMaster Board to Board Wire Harness 24V

For use with various LiftMaster® Swing and Slide Gate Operators and Perimeter Access Solutions

K41-0257-000

LiftMaster Harness Repl. Kit IHSL/ INSL24UL

Harness Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial Heavy Duty Slide and Industrial Lite Duty Slide Gate Operators

MP00224

Micanan Track and #41 Waterproof Chain for 7' h Door

For 3/4 & 1 HP Micanan trolley operators

HA-434TL

SkyLink Wireless Motion Sensor

Supervised Sensor: monitors the sensors and their battery condition automatically
Motion detecting range: 40 feet.
Operating range: Up to 800 feet.
Easy to set up (Battery not included).
FCC/IC approved.
Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended

.......more details

4580-304-KYNAR/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Kynar Grey 458-97 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

CRG11136P

Pentagon Crank Gear 11:1 36kg PVC *** Price by Quote Only

DECO-FASTNR-HNDL

Decorative Handle (Carriage-Style) Fastener 3/4" Stainless Steel Black 100/pkg

Self drilling metal screw
Stainless Steel all black

L504AL

LiftMaster Monitored Large Profile Resistive Edge w/ Aluminum Channel 4ft

ZAP-AX27-VBELT

Zap VBelt Cogged AX27

Compatible with: 8816-C 8826-C 8825-D 825-SS Series 1 or 2 Models
8825-C 8826-C Series 3 Models

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

For 1-3/4" thick door
Old style with round screw heads
Glass Dimensions: 17-3/4" x 12-11/32"
Hole Size: 18-3/4" x 13-3/8"
Exterior Frame: 19-3/4" x 14-3/8"

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

1/2" clearance needed between doors. Maximum door thickness of 2"
Weight: 3.5 lbs
Capacity: 400 lbs 500 lbs
Material: Formed Steel 3/16" thick

K41-0242-000

LiftMaster Output Sprocket INSL24UL

CBC14

Thimble 1/4" - 100 per pkg

LMEL-H

LiftMaster End Link Disconnect Latch

Commonly paired with LiftMaster® Commercial Fire Door Operators and extended performance release devices.
This product is compatible with the following models: LM21XPBB LM21XPBBVB LM21AFCB LM21AFCBVB LM21XP

MRIN

LiftMaster Base Riser Mount for industrial operators

Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
Provides a base-mount option instead of post-mounting the operators

Installation manual Manuel d'installation Retrofit guide Guide d'installation

LVB820-11/P1

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details