Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Chain Drive
PRO-J-10023-U-RH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • Emergency disconnect with electrical cut-out switch for manual operation
  • Three button open-close-stop control station Nema-1
  • #41 roller chain & sprockets on all internal drives
  • #50 roller chain and sprockets on final drive
  • 1" permanently lubricated & sealed ball bearings on final drive shaft
  • External radio control terminal strip
Pro J Manual Specification Sheet
SETR2681AM2K

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart
MG-00054

Micanan Plastic Spacer for Boards (Medium Length 0.768)

MK-00645

Micanan Plug-In Harness for External Radio Control 3-Wire

MK-00016

Micanan Fuse Holder

MK-00053

Micanan Overload Reset 3-Phase 8.0 - 11.5 Amps

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00051

Micanan Overload Reset 3-Phase 3.7 - 5.5 Amps

MK-00052

Micanan Overload Reset 3-Phase 5.5 - 8.0 Amps

MK-00046

Micanan Overload Reset 1-Phase 20 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00043

Micanan Overload Reset 1-Phase 15 Amps

MK-00346

Micanan Relay 12 VAC 8-Pin Plug-In

MK-00562

Micanan Relay 120 VAC 8-Pin Plug-In

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

  • 8-pin
MK-00141

Micanan Transformer 220V-24V-100VA

MK-00222

Micanan Transformer 460V-24V-100VA

MK-00142

Micanan Transformer 115V-24V-50VA

MK-00228

Micanan Transformer 230V-24V-50VA

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00235

Micanan Flasher 120V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MK-00058

Micanan Dual Timer 24V Module APT

MK-00062

Micanan Timer Base 8-pin

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MV-00220

Micanan Pull Cord DPST Swivel Type - Nema 4

MV-00238

Micanan Key Switch O/C Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MV-00017

Micanan Key Switch O/C/S Btn Tamper Proof Nema 1 Flush Mount

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00239

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MV-00010

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Metal Housing
MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

  • Surface mount
MV-00002

Micanan 2-btn O/C Nema-1 Pushbutton Control Station Metal

  • Surface mount
MV-00005

Micanan PBC-3 3-btn O/C/S Nema-1 Pushbutton Control Station Flush Mount

  • Flush mount
MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

  • Flush mount
PRO-H-5083U-RH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-514-R

Cut-to-Length Torsion Spring .283 x 5-1/4" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
PRO-J-7523-U-LH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-J-7583-U-LH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
RELAY068

Manaras Relay SPST 24VDC

PRO-J-5083-U-RH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-LJ-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

  • On-Board receiver holds up to 20 transmitters
PRO-LJ-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

  • On-Board receiver holds up to 20 transmitters
PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5021-U

Micanan 1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

  • 350g can
.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
.375-514-L

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-APT-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7538-U

Micanan 3/4HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5053-U

Micanan 1/2HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
811-11

Wheel Chock 811-11 Orange Urethane

  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
WC-5810

Wheel Chock WC-5810 Pyramid Rubber with U Hook

  • Solid Rubber Construction
  • Hook for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 10" long x 5" high
60-7248-CMH94

Wheel Chock Safety Pkg incl'd: chock with integral handle wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CMH-94 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Tooth" Like Bottom Grips Icy/Slippery Ground Surface
  • Powder Coated Yellow for High Visibility
  • Formed Steel
  • Size: 8" wide x10-1/2" long x 9-1/4" high
RELAY043

Manaras Relay 4-Pole 24VAC

  • Used on Manaras MLJ MLH MLT Models
MOTOR271

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
BPPB1758

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 96"(8')

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

41C76

LiftMaster Belt Sprocket Cover Kit

  • Also known as: 041C0076 41C53 41D469 99324608
MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

  • Set includes 2 tracks only
  • Chain NOT included
DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
212SE

Nortek Linear Weatherproof Keypad

  • 120 users
  • Indoor/outdoor self contained brushed metal housing
  • Surface mount vandal resistant design
  • One piece housing suitable for wall post or gooseneck mounting
  • Durable metal Braille alpha-numeric keys
  • 4 on board programmable timed relays
    • .......more details
CAP2D

LiftMaster Connected Access Portal 2-Door Controller

  • Cloud-based credentialed access control.
  • Capacities include: 2 controlled gates / doors
  • 25000 local resident capacity
  • 6000 local event history (FIFO) offline from host
  • Multiple Holiday and Hold-Open Scheduling including one-time and repeating exceptions
  • Power: 2V DC Min. 1.5 Amps (transformer not included)
    • .......more details
MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

  • Used on PRO-HHD
  • 1 required per operator
27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green
HRB-11

High Riser Bracket for 7" Above Dock or Higher 11"

  • High Riser 11" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-9

High Riser Bracket for 7" Above Dock or Higher 9"

  • High Riser 9" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-6

Standard Riser Bracket 6" Above Dock

  • Standard 6" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-3

Standard Riser Bracket 3" Above Dock

  • Standard 3" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

L

Molded Rubber Bumper Black 18" L x 8" W x 18" 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 18" L x 8" W x 18" 4" Projection
    • .......more details
T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1012-14

Laminated Bumper Standard Black 12" x 14" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-18

Laminated Bumper Standard Black 12" x 18" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details