Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GALV-375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

15265

Whiting Rear Frame Conversion - 7" Header 2.5" Posts

An add-on option only. Price by Quote

MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

Price by quote only

MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

GALV-225-258-144-R

Torsion Spring .225 x 2-5/8" x 12ft RH Galvanized Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

400BL

4" Light Brush Insert 6ft Long

Polypropylene bristles

GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Galvanized Yellow/Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-234-2-LH

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

PRO-GH-20053U-R

Micanan 2 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Universal Right or Left Hand mount

TRACK003

Manaras 1 Piece Galv Track 2x2x12'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

Includes LMRRUL Retro-Reflective Monitored Photoeye
Compatible with LA400 LA412 LA500
Does NOT include the battery or harness. A12330SGPLK sold separately

BCSI-HV-CONT-BLOC

Pivin Drapeau Contactor Block BCSI ** Price by Quote Only

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

Increases visibility of the arm on BL229 gate operator

GALV-234-2-144-R

Galvanized Torsion Spring .234 x 2" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Convenient Bolt-On Model

.......more details

REDUCER008

Manaras Reducer CC80-40D FR 182TC (40:1)

For 3 HP motor

MINI-218-3-10-LH-W

Mini Storage Spring .218 x 3" x 10" LH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

27025

Doorlec Electric Motor TEFC 1 HP 115/230V DC101C

BUSHING025

Manaras Bronze Bushing 5/8 x 3/4 x 5/16

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

10-8055

LiftMaster Counterweight Clamp for BG790

Also known as: G108055

MV00164

Nice AB 42GRL 9000-THRU-BEAM PHOTO Emitter 24V

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

345.000

Whiting Tongue & Groove Bottom Panel Assembly with Seal/Channel Made to Order. Price on Request

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

2806.162.220

Whiting .162 x 2-3/16 x 22" Roadside with Cones

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

OSH-6112-M-N1-RH

Manaras Opera-SH 1/2HP 120V 1Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

Installation Manual Sell Sheet

22653

Doorlec Momentary Contact/Plunger Switch Black

K74-39295-2

LiftMaster E-Box UL325 SL585

K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
For models SL585503UL SL585103UL

BCSI-PM14

Pivin Drapeau Belleville Washer ** Price by Quote Only

Belleville Washer acts as a spring to keep pressure on the Clutch disk

238-202

Serco S-Hook ** Price by Quote Only

For Serco loading docks

DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
Black crinkle head
Ideal for decorative (carriage style) hinges

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

SD751L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

K41-0244-000

LiftMaster BLDC Power/Motor Drive Board INSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

111031.0001.S

Overhead Door Link Hoist Release RSX

Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator

7-6113

RW Hanger 27B Truck & Pendant Sold Individually

KCPROXWLC26

Keypad & Multi-Technology Wiegand Proximity Card Reader (125 KHz)

Stainless steel proximity card reader & keypad with back-lit keys
Dust weather and vandal resistant
Can read: Centaur and most popular 26-bits badge & card format
Indoor/Outdoor application
Surface mount
Up to 7.5 cm (3 in) read range

.......more details

GHX-353-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 575V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

041-0192-000

LiftMaster Control Door Panel

Control Door Panel Replacement Kit
For use with various LiftMaster® Garage Door Openers featuring myQ® technology and Secure View™ Video Camera; manufactured after 2021 only

MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

2705.187_30

Whiting Curbside Torsion Spring.187 wire 2-3/16" ID 30" Long

Torsion spring wire only
.187 wire size

MF00044

Micanan Hex Head Bolt 1/4-20UNCx4" Not Full Thread

Used on various Micanan operators
1 required per operator

HARNESS044

Manaras Opera Motor 3PH 110 Conn Wiring Harness

K75-16512

LiftMaster FDC Brake Kit

For use with various LiftMaster® FDC Commercial Fire Door Operators

19-41ML-SS

Master Link #41 Stainless Steel

For #41 chain

27121

Doorlec Electric Motor 1-1/2 HP 208V 3PH DC223C

RSH-6214-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

8280.99

Whiting Aluminum U-Channel 99 IN Dry Freight

An original Whiting product
Use with Whiting seal # 5735

1634-134-W-G/T

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass Grey Tint

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

Chain pack only

15-41B32GXX

Sprocket 32 Teeth 3/4" Bore

GH-321-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 230V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

K75-37556

LiftMaster Drive Shaft Kit SL595UL

Idler shaft sprocket chain and chain links

O02R9209

AirLift Breather Vent

684-33-102

Universal Bracket 2.25" x 2.5" x 144" w/ Plate 12"x12"

MINIDEPTH001-MOD

Manaras Minimum Depth Mod. OTH OTBH

Always use chain #41 with this mod.

SPR41B36X1

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

42208

Doorlec Z Bracket Control Cabinet Support - Front

Works with various models such as ETBHW ETHW

75-12362

LiftMaster Adaptor Plate with Fasteners

Also known as: 7512362 K75-12362

OTBH-6232-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Elect. Circuit Board Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain

SL585151UL

LiftMaster Industrial Slide Gate Op. 1.5 HP 120/208-240VAC 1 Ph Heater NOT Incl. ***NLA

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

SGP-353-1-575/3

Doorlec Gate Master 1 HP 575V/3P with Heater

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

MOD112

Manaras Limit Shaft Speed-Up #48/#410 Chain

Sprockets and chain are replaced in order to accelerate the ops limit shaft to increase the accuracy of the limit system for sectional doors 8ft H or less
For field upgrades use MODKIT112

041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.