Devanco Canada - Get The Right Garage Door Opener‎ and Parts

TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
10" x 14"

LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-14

Laminated Bumper Standard Black 12" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MK-00787

Micanan Heater Probe 120V 20W Brass Fitting Field Install

MK-00805

Micanan Heater Probe in Reducer 24V 20W Brass Fitting Field Install

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

CP-SH-34-1712_SHAFT_ONLY

Lynx Clutch Shaft Only for HDC Operators

Fits all HDC operators - waterproof or not. All HP all years
3/4" x 17 1/2" - 2.15lbs

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
Powdercoated Grey
For use with 7/16" stem rollers

MS-00006

Micanan Trolley Track Set 12 Ga. 16'6" (for 14' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

Additional charges apply for adding PBS on cover or if panel is not ordered with an operator

NUT015

Manaras Hex Nut 5/8-24 UNEF

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** No Longer Available

For old 455 Automatic Doorman opener

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

Used on PRO-GHC
4 required per operator

90-B

Micanan Keyway 5/16" x 3" Long (Reducer BHC 80) for 2 3 HP

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

90-PGR

LiftMaster Parking Gate Radio Mod. Kit

G90PGR includes the limit switch wiring and bracket.
Used on PG HBG and BG models.

PRO-X_MOD-2HP

Micanan Explosion-Proof Modification N-7/N-9 for 1.5HP-2HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

K74-18346

LiftMaster Limit Shaft Kit

Compatible with LiftMaster® Model GH 5HP Commercial Door Operators

PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

Replacement torsion spring with cones
Specs: .139 x 2-3/16" x 13" Long
Roadside
For Curbside order part # 2807.139.130

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

Double - Loop end for strength
25" long 42" stretch 260 lb load
Sold individually
Rated for 10000 cycles

BB-1

Rubber Button Cover Black for 3BLM PBS

Rubber button cover only

MX-00151

Micanan Complete Hoist Shaft Assembly for PRO-GH Includes Pocket Wheel

Includes: pocket wheel shaft bevel gear chain guide spring collars spring pin and washers

LIMIT023

Manaras Single Limit Switch with 46 degree Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action.

MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

Comes with keyway and 2 set screws
Used on PRO-GHCW

2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

For Curbside order part # 2807.139.170

109007

Allstar Slide Switch Only Ivory *** Discontinued

ABC selector switch only

.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

Pan head

7-19-1

Lock Bar Guide Only

8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

An original Whiting product
Use with Whiting seal # 5735.96

PL-B09-CRG-METAL

Lynx Inner Trolley (Metal)

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

27089A

Genie Washer

Drive shaft washer for PMX500

BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

SEL2643R318-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 318MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Wireless System Chart

HW0775

Low Headroom Quick Close Device 2" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'
Single End

Diagram

.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details

MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

Base Mount TEFC electric motor
Fits models: TW TBW JWHWHHDW SDW

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

MOD082

Manaras Hazardous Location Modification

For electromechanical control only
For indoor use in hazardous locations

MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

Pierced track

DOCK-SEAL

Special Order Dock Seal Price by Quote Only

Made to order Models R-100 R-600 & R-700
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
Custom Logo available

.......more details

R-100 order form R-600 order form R-700 order form Catalogue

BCH101L5R-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

Addition transmitter unit for multiple setup

Manual

PRO-HBH10021U-R

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

G1T-BX

Genie 1-btn Dual Frequency Transmitter -38501R

Auto Seek Dual Frequency 390/315 MHz
For Intellicode products only
1-Button Remote Control with Intellicode.
Compatible with all Genie openers produced since 1995.

Programming instructions

109007.3901.S

Overhead Receiver 390 Mhz

9 switch trinary fixed code 3-wire gate and garage door receiver

1116633903.S

Overhead 3-btn Transmitter 390 MHz

Replaces the 1091303903.S
3-channel transmitter opens and closes 3 doors
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included

ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 538
Reverse side is #431 Bright White

Colour chart

2569.1

Whiting L-Handle Non Locking

3" shaft

5-36-8

2" Vertical Track 14-GA 13'-4" (14' door) Sold per Pair

MK-00172

Micanan Non-Resetable Analogue Counter 24V

Monitors door cycles

CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

Same as Garaga CF101

.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-U-Y

Miller Edge MU22 2-Wire Universal Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

IRB-BX

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

Includes housing and clear plastic front

CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CarWash Modification

LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

GAREX-DOORFACE

Garex Special Order Door Face Only

Ordered to the customer's exact requirements

GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included (MX00206)

Solenoid sold separately

GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

3/4" x 16-3/8"

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units