Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Chamberlain - LiftMaster - Sears
MX-00151

Micanan Complete Hoist Shaft Assembly for PRO-GH Includes Pocket Wheel

  • Includes: pocket wheel shaft bevel gear chain guide spring collars spring pin and washers
LIMIT023

Manaras Single Limit Switch with 46 degree Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action.
MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
109007

Allstar Slide Switch Only Ivory *** Discontinued

  • ABC selector switch only
.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
7-19-1

Lock Bar Guide Only

8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

  • An original Whiting product
  • Use with Whiting seal # 5735.96
27089A

Genie Washer

  • Drive shaft washer for PMX500
BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Left Hand

SEL2643R318-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 318MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Wireless System Chart
HW0775

Low Headroom Quick Close Device 2" track Sold as a Pair

  • Includes 1 RH & 1 LH bracket
  • Heavy Duty for doors up to 16' x 16'
  • Single End
Diagram
.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

  • Designed to reduce the risk of the door falling in the event of spring breakage
  • 3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
  • For 1" shaft (1-1/4" shaft available for special order)
  • Fits 1-3/4"-6" Torsion Springs
  • One device per spring is required
  • Not for use with duplex springs
    • .......more details
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
MOD082

Manaras Hazardous Location Modification

  • For electromechanical control only
  • For indoor use in hazardous locations
MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

  • Pierced track
DOCK-SEAL

Special Order Dock Seal Price by Quote Only

  • Made to order Models R-100 R-600 & R-700
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
  • Custom Logo available
    • .......more details
R-100 order formR-600 order formR-700 order formCatalogue
BCH101L5R-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

  • Addition transmitter unit for multiple setup
Manual
G1T-BX

Genie 1-btn Dual Frequency Transmitter -38501R

  • Auto Seek Dual Frequency 390/315 MHz
  • For Intellicode products only
  • 1-Button Remote Control with Intellicode.
  • Compatible with all Genie openers produced since 1995.
Programming instructions
109007.3901.S

Overhead Receiver 390 Mhz

  • 9 switch trinary fixed code 3-wire gate and garage door receiver
1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 538
  • Reverse side is #431 Bright White
Colour chart
2569.1

Whiting L-Handle Non Locking

  • 3" shaft
5-36-8

2" Vertical Track 14-GA 13'-4" (14' door) Sold per Pair

MK-00172

Micanan Non-Resetable Analogue Counter 24V

  • Monitors door cycles
CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

  • Same as Garaga CF101
.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-U-Y

Miller Edge MU22 2-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CarWash Modification
LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
GAREX-DOORFACE

Garex Special Order Door Face Only

  • Ordered to the customer's exact requirements
GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included (MX00206)

  • Solenoid sold separately
GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-3/8"
APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

  • Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
  • As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units
MOD012

Manaras Non-Resettable Counter Modification Inside Control Box

  • An electromechanical counter is activated to count each complete door cycle.
TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5094 (right) and 60-5095 (left) sides
    • .......more details
48"Track Guard Shop Drawing - Left48"Track Guard Shop Drawing - Right
SBX-N4-P-0000-FD

Micanan Control Box Eurodrive Limit Box

AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
AW14K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • AW14 18ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator

RW-WINDOW

Richards Wilcox Thermal Window Special Order

12124

Doorlec Coupling 2-3/4" x 1"

  • Used on model SGP
ANT-2

Linear 3ft Mid-Range Antenna (SNE00002)

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Three-foot whip style
  • 18 feet of coax cable included
  • ”U” bolt included for post mounting
  • Dimensions: 2.25” W x 39” H x 2” D
  • Same as: SNE00002
    • .......more details
89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

  • This unit will work on any model Marantec garage door opener
  • Replaces part # 47307 65456 M3-543
  • Made in Germany
MB-01010

Micanan Electric Motor Only Limited Duty 1/2HP 110V 1PH

  • Fits models: LT LJ LH LHA
15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

  • Same as 15-41B14LGF
MU22-CUSTOM

Miller Edge MU22 Custom Made Edge

  • Edge made to customer's exact specifications
WorksheetInstallation manualSell sheet
MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

Z9006

Shaft Key Stainless Steel Straight 3" Long x 1/4 Square

  • 3" Straight Key
  • Stainless Steel
MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

  • PRO-H/HB operator parts
  • 2 required per operator
MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

  • For 3/4 & 1 HP Micanan trolley operators
MD00413

Micanan Flex Coupling Lovejoy 3J x 3/4"

MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
Additional arm accessories
MK-00430

Micanan Capacitor 240V/250V 70 Mf

  • For limited duty 110V operators
2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
Installation manualSpecification sheet
K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow T-astragal
  • Width: 4-3/8"
43402

Carriage for R-99 Trolley

P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
P220-3K

Heddolf 3-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

  • For door thickness 2"
K76-34740

LiftMaster Limit Passpoint Kit

  • Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
  • For RSL12V RSL12VH
  • Aslo called Learn Limit Assembly Kit
G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
BL-BAG-1A

Barlock Hardware Bag Only for Doors 12ft and Under

  • Does NOT include the locking bars
  • Up to and including 12ft
  • Kit includes lock spacers and fastereners
Assembly Manual
G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

  • Upgrades added when purchasing a commercial operator
HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
SPRING026

Manaras Trolley Arm Disconnect Spring MGH

D-2-6

Keyed Disconnect Device 6ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear ***POR

  • Complete set vertical and horizontal tracks - torsion rear
GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
Installation guideGuide d'installation
G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

  • Bottom seal sold separately
SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

  • Same as SN000099-30-2
  • Compatible with KPR2000 reader
  • Replaced by LMPC2-SN (need to know facility code)
COAX-5-RG6

Coax Cable Assembly 5 ft

  • Assembly includes union
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)