Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SL595205UL

LiftMaster Industrial Slide Gate Operator 2 HP 575V 3PH with Heater - UL325

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® high starting torque continuous-duty motor.
Operator Duty Rating: 25 cycles per hour.
Metal frame 7-gauge pre-galvanized steel.
Worm gear reduction 20:1 worm gear reducer.
Chain #50 nickel-plated (25 ft. supplied).
Cover: Powder-coated pre-galvanized 16-gauge steel oil tight weatherproof NEMA 3R lockable cabinet.
Operator weight: 270 lbs
Includes: LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam engineered to stay aligned; max. Range: 50 ft.
Includes: S505AL Monitored Small Profile resistive edge
Heater HTRNB is included on 575V

WHITING-RV-INS

Whiting Stainless Steel Rivet/Mono Bolt Option for ColdSaver Door

Upgrade option

K75-30737

LiftMaster Disconnect Kit for GH

Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
Compatible with LiftMaster® Model GH Commercial Door Operators.

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P2
Reverse side is #431 Bright White

Colour chart

K22-35704

LiftMaster Brake Solenoid 208V

Used on all brands of commercial door and gate operators
2 wire connection

PIN007

Manaras Slotted Spring Pin 3/16" x 1-1/2"

CP-TIMER-CN

Lynx Relay (Dual) Timer Hard Wired

PTM-120V

EMX 7 Day Programmable Timer 120V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

K10-3515

LiftMaster Retainer Guide

Also known as: 10-3515 G103515 103515
For use with LiftMaster® Models SL580 & SL590 Commercial Slide Gate Operators and Perimeter Access Solutions

O22R1002

AirLift Airline 3/8" Sold per Foot

O22R1004

AirLift Operator Install Kit

O17R1000

AirLift Inline Airline Dryer

O17R2001

Airlift Automatic Oiler L3000

O13R1600

AirLift Control Box Open/Close w/Emergency Open

MP00070

Micanan Jackshaft w/Aux Trolley Assembly Mod. 8ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

HARNESS099

Manaras Opera ECB070 12 Pin Conn Wiring Harness

HYBRID-BLK-20

Residential Side & Top PVC/Aluminum W/S with cap 20' Long (241") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-8

Residential Side & Top PVC/Aluminum W/S with cap 8' Long (97") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-7

Residential Side & Top PVC/Aluminum W/S with cap 7' Long (85") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-9

Residential Side & Top PVC Weather-Strip with cap 9' Long (109") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-7

Residential Side & Top PVC Weather-Strip with cap 7' Long (85") - White

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

7-6097

RW Hanger 150B1

Apron: Laterally adjustable formed steel 11-3/4" l. x 4" w.
Pendant: 3/4" dia. square head bolt with adjusting nut zinc plated
Door Thickness: 1-3/4" to 2-1/4
Includes: 1 Pair in a box.
Included in each box: 12 flat head stove bolts 3/8" dia. x 2-3/4" l. for 150B1 12 flat head stove bolts 3/8" dia. x 4" l. for 150B2 2 carriage bolts 7/16" dia. x 1"â??long 1 lock joint clip for No. 33 track. 2 blinds for track ends
Wheels: 3" diameter Steel

.......more details

65-52081-16

LiftMaster Dual Trolley Mod. #41 Chain for 16ft High Door Includes (2) 16' (Actual length 227") tracks and (1) Round Bar 240"

Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
Includes 16ft tracks Round Bar 1" x 20'
For H/J/GH

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
Black Oxide coating provides corrosion resistance
Suitable for use exterior applications

K77-10897

LiftMaster Mounting Bracket Disconnect (Chainkeeper) H MH GH SD

Also known as: 10-10893 107011 10-40463 1010893 109027 K77-10704

OWL

EMX Microwave Motion & Infrared Presence Sensor

The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor

.......more details

Manual Sell Sheet Quickstart Guide

AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
Eliminates the need to stock odd size hinges
Works for 7/16" shaft diameter rollers

K13-36117-1

LiftMaster Cludge Cover for RSW CSW

Protects cludge assembly
Hard cover sloped front beveled edges
Compatible with LiftMaster RSW12UL CSW24UL

41C0589-2

LiftMaster Belt Cap Retainer

Also known as: 041C589-2 41A537 41C589-2
For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
Complete kit includes: Sprocket sprocket cover and replacement screws

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

Includes 1 left and 1 right hand bracket
BB-4 SF

4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

SHAFT105

Manaras Limit Shaft 5/8"-24 UNEF LG

GH-311-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 115V 1P Contactor Model (Hard Wired)

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

Cones for 6" ID Right Hand Wound spring wire
Not universal thread

SF600S-LEFT

Spring Fitting 6" Pair Stationary + LHW 1" Shaft

Cones for 6" ID Left Hand Wound spring wire
Not universal thread

FT-1

Nortek Field Test Receiver

Tests for RF interference on MegaCode and AllStar based access control panels receivers and garage door operators
Compact and lightweight with battery save feature
Built-in speaker lets user hear what receiver hears
Special tone simplifies transmitter testing
Visual LED indication to confirm interference
Frequency: Wide band 318 MHz center frequency

.......more details

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

K18-10931

LiftMaster Compression Spring

Also known as: 187009 G187009 1810931 18-10931 18-7009

K20-1050C-2PSF

LiftMaster Electric Motor 1/2 HP 115/30V 1PH CF

Replacement electric motor for fire door op

N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MO00034

Micanan Brake Compression Spring (5/16" ID)

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

PPLK1PH-100

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 100 pack

.......more details

GTO-R550

Nortek Replacement Swing Gate Control Board

MODKIT027B1

Manaras Universal Aux. Output Module B070 Field Install

MODKIT027B1 for field install simply plugs into the control board
Controls several auxiliary devices such as Strobe horn fan lights etc
Works with BOARD070
Order MOD027B1 when ordered in conjunction with a commercial operator

ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

Field Configurable
Hand Held or Keychain three button
Rolling Code Technology
1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
Nema 1

.......more details

Manual

.187_2"-RH

Torsion Spring .187 x 2" x 12ft RH

Wire size: .187
Inside diameter: 2"
Length: 12 ft

.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH

Wire size: .187
Inside diameter: 2"
Length: 12 ft

19-50HL-NP

Half (Offset) Link #50 Nickel Plated

For #50 chain

SEA-23105515

SEA Wireless Intercom System 3G/4G Audio

Up to 100 Caller ID Access Number: Use your phone as entry credentia
Roll Over Call feature up to 4 Phone Numbers
Weatherproof and vandal proof stainless steel design
Simple Set Up by SMS Text Message or by APP - CellCom Prime Programmer
Ideal for Vehicular & Pedestrian Gates as well as Office entrances
Lighted keypad up to 250 Entry Codes: 200 Entry Codes 20 Time Restricted Codes 20 Temporary Codesl

.......more details

19-80HL-NP

Half (Offset) Link #80 Nickel Plated

For #80 chain

MOUNTSHAFT018C

Manaras Limit Shaft Kit MGH Pre-2011 up to 1.5HP

For MGH pre-2011 up to 1.5 HP

SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
Three button control O/C/S
Adjustable clutch
Solenoid brake
Universal mount. Left or Right side

.......more details

LPWKP-BLACK

Linear MegaCode Wireless Keypad 318 MHz Black ** To Extent of Inventory

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

K94-32309

LiftMaster J2 Harness Assembly SL585 SL595

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

SS-1-1/4-11

Solid Shaft 1-1/4" Keyed 11'-0" Galvanized ** To Extent of Inventory

Actual length is approx. 11'-0"

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

18212

Limit Switch LS2 G3M Female

For use with Rite-Hite dock levelers

GH-321-1

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

GEAR004

Manaras Plastic Gear for MDJ/MDT

White plastic gear with 2 holes to accept COUPLING001

2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

25-42-320

Extension Spring 7' Door - 320 lbs Green w/ clip

Double - Loop
25" long 42" stretch 320 lb load
Sold individually
Rated for 10000 cycles

WA11

NICE Adjustable Stand for L & M BAR Gate Op

Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
Attaches to ground and provides support when arm is down

FLOX2R/A

NICE Wireless Universal Digital Receiver 2-Channel 433 Mhz

Features step-by-step timer and anti-burglar functions.
Works with all standard gate operators.
Management of multi-user system through the unique personal code.
Uses BM250 memory which holds 255 codes.
Reception frequency : 433.92 MHz
Power input : 24V or 12V ac/dc ± 10%

.......more details

EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

LMLED1

LiftMaster LED Bulb 60W Equivalent 1/pkg

Designed to minimize radio frequency interference
Daylight white light output (5000K) ideal for garage use
800 lumen / 60w equivalent
22-year life
Durable: shatter-resistant and cold weather tested to -30° F /-34° C

K20-1075B-2TP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L5 TEFC

Electric motor
Also known as: 20-1075B-2TP K20-1075B2T

MOD114A

Manaras Synthetic Oil Upgrade Only

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

MM00139

Micanan N-4 Cable Entry Tube

MG00012

Micanan Ribbed Hex Nut 5/16-18UNC

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details

2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

33356A

Genie Opto-Luctor Wheel

HCT08

LiftMaster HCTDCU Rail Only for 7'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

BCH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

PTM-24V

EMX 7 Day Programmable Timer 24V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

MA020

LiftMaster Mega Arm Replacement Cover

MA-020 is a Mega Arm Replacement Cover.
Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY

7470.100

Whiting Side Seal for insulated doors 100" Long

Fits Coldsaver and Tempguard

37557R

Genie Chain Drive Bullet Assembly

This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
Works with chain model Genie garage door openers that have a C-Channel rail.
The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
Assembly contains: The 2 Bullet side white pieces and the four screws to install it
Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

These panels are 15.50" height x 98" width.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OSH-6812-ECB

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

RDO-321-3/4

Doorlec RDO Rolling Curtain Op. w/ECB 3/4HP 230V 1PH

Additional charge for doors over 14' high

Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
Dimensions: 2" diameter x 4-1/4" long.