Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Side & Top
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
801-300-002-00

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz Pre-2016

  • 1000 ft range
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

  • Full 7' belt assembly for models 1270 1280 and 1280R
.262_1-3/4"-RH

Torsion Spring .262 x 1-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
MGH-6436-M-N1-LH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6435-M-N1-RH

Manaras 1.5 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6114-M-N1-RH

Manaras 1 HP 120V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6233-M-N1-RH

Manaras 3/4 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
RGH-6814-MON-LH

Manaras 1 HP 208V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
RGH-6814-MON-RH

Manaras 1 HP 208V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
MGH-6113-M-N1-RH

Manaras 3/4 HP 120V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OGH-6213-M-N1-LH

Manaras 3/4 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6433-M-N1-RH

Manaras 3/4 HP 480V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6536-M-N1-LH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6435-M-N1-LH

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6235-M-N1-RH

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6215-M-N1-LH

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
1-0244

RW Stay Roller 154 Heavy Steel Black Enamel

  • Heavy Steel Warehouse Stay Roller.
  • Wheel protected on all sides except door side with heavy steel frame
  • Wheel: Gray iron. 3-1/2" dia
  • Frame: Steel. with slotted screw holes for adjustment
K41-0447-000

LiftMaster TECHNA Arm to Housing Cable

  • Arm harness
  • Universale for Techna
OTBH-6433-M-N1

Manaras Trolley Operator 3/4HP 480V 3Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • Includes PHOTO-070
HERITAGE-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Long Panel - Available in steel - Comes with raised decorative mouldings on panels - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
CLASSIC-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Short Panel only - Available in a selection of colours - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
MX002467

HySecurity Eyebolt Nut and Nord-Lock Cylinder Anchor

  • Anchors and adjusts hydraulic cylinder to mount 1" includes eyebolt 2 nuts and 2 Nord-Lock washers
  • For use in StrongArm models manufactured after 03/25/2011
OGH-6214-M-N1-LH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OPH-6212-M-N1-LH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
2GW-L

Rolling Steel 2" Stamped Alternate Windlock Left Hand

K41-0354-000

LiftMaster Replacement Door for IHSL and INSL

  • Compatible with the IHSL and INSL
PDC-300-075-1-50/63-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 50:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1-50/63-20

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 50:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
BARL-1003-158-16

Elton Bottom Aluminum Retainer Fits 1-5/8" Doors Brush/Seal Channels 16ft Long

  • Aluminum bottom retainer that integrates a 45-degree brush seal channel combining two essential commercial door seals into one robust solution
  • Compatible with V1003 bottom rubber 3" to 6.5"
  • Integrated 45 degree angle retainer for our RL brush seals
  • Brush seal deters rodents
  • Available in 18 foot lengths easily customizable to desired length
  • Available for Garage Door Thickness: 1 5/8"
    • .......more details
BGARM12LED

LiftMaster TECHNA Barrier Gate Arm only 12ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
    • .......more details
111439.0001S

Genie/Overhead Door Wire Harness Radio Pigtail

  • Fit various Genie/Overhead Door commercial operators
PDC300-34-1-40-20-CH

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1.25-40-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-050-1-40/50-20-CH

Pulse 300 Direct Drive Opener with Manual Chain Hoist 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
28001

Doorlec Flange Bearing F-360-13 3/8" (.94cm) Hole

  • Fits model LJHW
PDC-300-050-1-40/63-20

Pulse 300 Direct Drive Opener 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
K22-13028-1

LiftMaster Brake Solenoid 24V FDO-A FDO-B

MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
FLO2

NICE 2-btn Dip Switch Remote 433.92 MHz

  • Nice 2 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
111859.0001.S

Genie / OHD Shaft Assembly HXH/RHX-Hoist *** Price by Quote

112498.0001.S

Genie Release Kit Expf *** Price by Quote

22DUALTROLLEY16

LiftMaster Dual Trolley Mod for TDC12 TDC22 to 16ft high **includes (TDC41-16) CHAIN PACK (10-5816) 16 FT RAILS x (11-52102) 1" Solid Shaft 12ft (DualAuxTrolley41) Hardware kit

  • Includes: TDC48-20 CHAIN PACK #41 16 FT RAILS x 1 11-5220 CRSBARROUND1" X 12' x 1 10-5820-P TRACKTROLLEYFOR 16FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD41 MOD-KITDUAL TROLLEY41 CHN x 1
MGH-6537-0M00

WRONG CODE - DELETE

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
PRO-HBH-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
PRO-HBH-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
ME120-Y-2WIRE-R

Miller Edge Yellow 2-Wire NM Right Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
026-G019

Blue Giant Proximity Sensor M30 M12 Connector

  • (30mm Unshielded) Home/Lip Sensor
Z9962

L5 Operator Mounting Bracket

  • Compatible with L5 Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
7AUXTROLLEY10

LiftMaster AUX Trolley Mod JDC/JHDC 7 10ft (Incl. TDC48-1 (1) Chain #48 (1) 1"x 12' bar (2) 10-5810-P Tracks

  • AUX TROLLEY MOD JDC/JHDC 7 TO 10'
  • 7AUXTROLLEY10 is an auxiliary trolley kit for LiftMaster® Maxum JDC and JHDC Commercial Door Standard Duty Operators up to 10 ft.
  • Provides trolley type operation on standard lift doors (sectional) where side mount operator is preferred over a trolley operator.
35.0245

BEA LZR-WIDESCAN Replacement Cover Only Black

  • Replacement cover for the LZR-WIDESCAN sensor
MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

  • used with Mega Arm Barrier gate operators to control traffic lights etc
SA1929/A18

Automatic Systems Feig Double Channel Loop Detector BL229

  • For AS1620 BL229
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
PRO-HBH10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1-1785

RW Spring Bolt 514 x 2

  • Housing: Cast iron 5-1/2" H x 2-7/8" W
  • Bolt: Cast iron bevelled
  • Keeper: Surface mount
  • Chain: Zinc plated 36" long with ring Finish: Zinc plated
GALV-331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-144-L

Torsion Spring .331 x 6" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
OTBH-6532-AM05

Manaras Trolley Operator 1/2 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
G-40X13-134-CHRCL

Thermal Window Clear 40" x 13" for 1-3/4" Garaga Door Charcoal

  • For 1-3/4" thick door
K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
K94-36992

LiftMaster Brake Cable Harness 1PH L5

  • Compatible with various LiftMaster® Logic 5.0 Commercial Gate Operators
2806.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .1182 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.182*290
CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

38252A.S

Genie Opto Wheel

  • The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
  • Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155
GHX-383-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
10TD433HH2

BEA 2-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
PRO-HBH-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
MX000585-0

HySecurity Smart Touch Controller Board

  • Easy Installation Configuration
  • Warning Buzzer and Alarm System
  • Ethernet Connectivity via HyNet Gateway
  • Security Monitoring and Breach Reporting
  • Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator
MX001100

HySecurity Crankshaft w/Crank Bearing Zerk for StrongArm

  • Compatible with StrongArm systems
  • Includes crank pin bearing and zerk fitting
  • Two key stock for secure arm mounting
  • Supports smooth and efficient gate operation
K07-2706

LiftMaster Arm Hub

  • Also known as: 072706 07-2706 07-2706-1 G072706
  • For use with various LiftMaster® SW420 Series Swing Gate Operators
1-0418

RW Bow Handle Black Steel

  • Size: 191
  • Steel drilled for 1/2" dia bolt
  • Overall size: 13-1/2" h x 2" w. Handle projects 2-3/4" from doorface
  • Length of Grip: 8"
  • Depth: 1-7/8"
7909212

FAAC Control Panel Main Circuit Board for FAAC 844

1-0243

RW Stay Roller 153 Galvanized

  • For use on #31 square track
K15-48B18AXX

LiftMaster Sprocket 48B18T 3/8" Bore

  • Sprocket for #48 chain
  • Also known as: 15-9014 G159014 15-48B18AXX 159014
OSH-6433-M-N1-LH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
42685

Doorlec SGP Operator Cabinet Only

CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

502290

Trac-Rite Tube Astragal 502290 Sold per Foot

MT21-2M-BLACK-LH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

  • -Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.
STEELCRAFT-TD134

SteelCraft TD134 Replacement Panel Special Order

  • Ordered to customer specs.
  • Price by quote only
2807.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 25" Long
  • For Roadside order part # 2806.177.250
MULTI-GROOVE

Garex Ready to Install Door Multi-Grooved Special Order

  • Available with a choice of simple and varied colors this textured woodgrain door will meet your style and requirements for quality and durability
  • R-16
MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

  • C-Flange motor fits: GT GH GHC GSD
RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

  • RBand Gate Edge Transmitter/Receiver System
  • The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
  • The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
  • RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
  • It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.
2300-925-BLACK

Linear Operator Cover Only Black

  • The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
  • Made of Polyethylene
2100-0054-UPS

Linear Bolt #41 Chain Tension

  • Used on various Linear Gate operators
GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included