Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Side
GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

  • This is a Whiting original roller
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
LZR-H100

BEA LZR Gold-Black BLK-02 H100

  • Laser scanner for gate and barrier applications.
  • Provides four laser-based curtains offering a three dimensional detection zone.
  • Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
  • Effective alternative to induction loops.
  • Max detection range: 32'x32'
  • Cable length: 33'
    • .......more details
LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)
2110-700

Linear Idler Assy Large Gate

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0380-000

LiftMaster Bridge Rectifier 700/1200

  • For Maxum ops
K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

  • For Maxum Trolley 1200 Op
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Chain Spreader for Maxum for 1" door shaft
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
8086.207.320

Whiting .207 x 2-5/8 IN x 32" RoadSide with Cones

  • An original Whiting assembly
GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2807.206.380

Whiting .206 x 2-3/16 x 38" CurbSide with Cones

CGH303L5-RH

LiftMaster Gearhead w/Carwash Mod. & Brake 3 HP 208/230/460V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
K07-3611

LiftMaster Disconnect Bushing

  • Compatible with LiftMaster® SL590 Slide Gate Operators
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

E/0172/166

Automatic Systems Spring Assembly

BEA-10ULTIMO

BEA Automatic Sliding Door Sensor

  • Dual technology sensor for sliding doors: the microwave motion field activates as people/objects approach as the infrared curtains ensure the safety of pedestrians passing through the door opening.
  • Provides uniform sensitivity across the curtain.
  • Ideal for high-traffice environments such as hospitals hotels airports or retail facilities.
  • Mounting height: 6'6 to 11'6 •Operating temperature: -13 to 131F
  • IP54
Installation Manual Manuel d-InstallationSell Sheet
K41-0241-000

LiftMaster Transformer for IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
GS-RA-01-BLACK

Guide Seal Reverse Angle Black Sold by the Foot

E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

  • 71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

  • 71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

  • Length: 15" Width: 5.0MM (0.187")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
K001A6407-1

LiftMaster Logic Board Absolute Encoder

  • Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
2705.177_13.5

Whiting CurbSide Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6214-M-N1-RH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
MOUNTSHAFT013

Manaras Hoist Shaft Kit for GH GHW/C/X MGH MGHW/C/X

  • 5/8D15LG
SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
041-0347-000

LiftMaster Camera Replacement Kit

  • Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
PUSH180

Manaras Contact Block NO XB4/XB5

11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius CurbSide 1 Piece

  • 1 curbside horizontal track
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
50695

Doorlec Clutch & Pulley Assembly for EHJX

  • Includes shaft and bearings
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K41-0156-000

LiftMaster Cable Tension Monitor Left Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor
XF208VAC7

LiftMaster 208V Transformer Kit 700

VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

  • Magnetic striped cards
  • Track II encoded
  • Low-CO magnetic stripe
  • Sold in lots of 25
  • Same as: 0-200025
WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

  • Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
  • R-VALUE: 12.12 / 16.12
  • WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.
TDC7S1BMC

LiftMaster MAXUM Trolley DC Comm. Op (#48) 1/2HP Equivalent 120/240V 1PH Std Cycles 700LB

  • Smooth Start/Stop Operation - New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - Provides seamless operation by supplying standby power when the power is down (battery backup sold separately)
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories.
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
TDC_Installation-manualTDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideBuying guide
2100-1650

Linear Plate with Solid Pin V Groove