Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Wireless Keyless Entry
1005-1-3/8-14

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-3/8"
MOD082

Manaras Hazardous Location Modification

  • For electromechanical control only
  • For indoor use in hazardous locations
41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

  • This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
  • Works with 41A5034
  • Same as: 041B0873 41B873
OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX4.S GIDFX4.S
41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

  • This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
  • Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

  • A Whiting original part
  • Stainless steel bearings stainless steel shaft
RW-TS-OPTION

Richards Wilcox Top Seal & Retainer Option Sold per Foot

  • Available option when purchasing doors
MB-01010

Micanan Electric Motor Only Limited Duty 1/2HP 110V 1PH

  • Fits models: LT LJ LH LHA
25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

12131

Doorlec Brake Disc 4" x 5/8" Keyway

  • Fits Doorlec model SGOH
IRB-RET

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

  • Type B1 non-contact sensor
  • UL 325-2016 compliant
  • Operating range up to 60 ft. (18.3 m)
  • NEMA 4X enclosure
  • Sensitivity adjustment: potentiomete
  • Mounting bracket and reflector provided
    • .......more details
Installation manualSell sheet
41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 8 foot high garage doors
  • T rail assemblies ONLY.
BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
Bilingual parts catalogueTechnical manual
41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

  • Dual sprocket assembly for 3/4 HP chain drive operators.
  • Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
  • For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S
K1D6761-1CC

LiftMaster Logic Board AC

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
Sell sheetTechnical document
PROROLL4

Cantilever Roller 4" Round Post with Covers Sold as a Pair *** Discontinued

  • 3100 pound rating
  • Integrated polyurethane cover for safety ensuring UL325 compliance
  • Sealed bearings for maintenance-free operations
  • DuPont™ Delrin® injection molded for smooth quiet movement
  • High-precision roller for water resistance and industry's best overall temperature rating
CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

  • Replaces the 4 wire AO Smith electric motor
SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
Installation guideGuide d'installation
FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

  • For high-speed doors
  • 3/16” 6x19 galvanized
  • Polypropylene core to help prevent wear and increase flexibility
  • High life cycle wire rope for rapid doors
  • Lubricated during production for extended life
  • 500 feet per roll
    • .......more details
ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 506
  • Reverse side is #431 Bright White
Colour chart
104462

Marantec 7ft Belt Rail 1.2mm Heavy-Duty M13-1207B

  • 1-piece rail
ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 523
  • Reverse side is #431 Bright White
Colour chart
5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
50030

Doorlec Key Switch with Spring Return in Waterproof Housing

  • Weatherproof start key switch
  • Nema 4 enclosure.
  • Cast aluminum base with tamperproof aluminum cover
  • Rating: 10 amps 124VAC
  • Contacts: Single pole silver alloy momentary contact
  • Two keys supplied with each switch
    • .......more details
201-300-411-00

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz Pre-2016

  • Open/Close/Stop remote for 16 doors
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
2B639

LiftMaster Speaker for EL25 (41B0639)

  • 1B0639
XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

  • French description: Ensemble ressort 06/04
  • For model BL27 gate operator
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications
ME123-M-BLK-U

Miller Edge Black Universal 4 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
Z9207

Sensor Guards Sold as a Pair

  • Made to fit over garage door sensors
  • Will fit over most popular sensor brands
  • Protects sensors from coming out of alignment
  • Helps protect against water corrosion
  • Easily installs to the door track or the the wood door frame
  • Sold by the pair
    • .......more details
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

95358

Marantec Front Idler Assembly

  • Complete Roller holder assembly for ML-Series rails
  • Used for belt and chain drive opener rails
  • Same as # 8030432
OSH-6112-CONT-L

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
41D7675

LiftMaster Receiver Logic Board 2.0

  • Also known as: 45ACT
MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

  • Modification when purchased with an operator
  • #410 CHAIN WITH FRONTIDLER ASSY
  • CHAIN HOIST ASSY
  • HOIST KIT FOR TROLLEY HOIST CHAIN
Drawing
1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

  • For door thickness of 1-5/8" to 1-3/4"
MK-00005

Micanan Cut-Out Limit Switch

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

  • Used on Mega Arm gate operators
  • Requires counterweight model MA117 - sold separately.
  • Size: 17 feet long x 3" round
  • Arm opening area: 14ft (end of cabinet to arm tip)
  • Replaced by MA116RDOT
10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

  • Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
29-98200

W-Style Universal Drop In Door 98" x 100"

  • Shipped with hardware loose on each side
  • 98" W x 100" H
  • Made with 3/4" thick 7 ply exterior grade medium density plywood
  • Includes all hardware
  • Other sizes available
21-10340

Transformer 115-24V AC 20VA

  • 120V Primary 24V Secondary 20VA
Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

  • Works with all Torque Force Chain Hoists
EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
12-10715

LiftMaster Flanged Bearing 1" Keyed

21-35077

LiftMaster Transformer 575V 24V 40VA

  • 575V PRIMARY 24V SECONDARY 40VA
  • Same as K21-35077
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
SL316COP

Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP
.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
K94-36591

LiftMaster Junction Box with Cable for LA500

  • Compatible with LiftMaster LA400 LA500 swing gate operators
  • Waterproof junction housing
  • Includes 40 ft. of insulated cable
  • Includes mounting hardware wing-nut/flange wall anchors
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
SEL2641R433K8PM

Erone 800 User Receiver 433MHz

  • Multi-user receiver
  • 800 two-channel transmitters + 7 master transmitters
  • Includes 1 master transmitter S2TR2641E2M for programming
  • 12/24V AC/DC
  • Option: PC software kit # SEL2641KITP8 sold separately
  • 1 NO relay + 1 NO/NC relay
    • .......more details
Installation manualWireless System Chart
9150000627

1/8" Stops ONLY 100/pkg

  • Stops only 100 per pack
T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

19988A

Genie Motor Start Capacitor 220V 70MFD (37954R)

  • Compatible with most Genie 1/2 HP model garage door openers
  • Same as part # 37954R.S
37845R

Genie Screw Drive Carriage Assembly

  • Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
  • Works with Screw Drive Shuttle assembly part # 36664R - sold seperately
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
7001-9-W/B

Commercial Side & Top Weather-Strip 9' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-W/B

Commercial Side & Top Weather-Strip 7' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
LEVER065

Manaras Brake Lever

GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • GH operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
37408

Doorlec Reversing Contactor BF9 120VAC

MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
860LM

LiftMaster Universal Weather Resistant Receiver

  • Weather-resistant for outdoor mounting requirements
  • Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
  • Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
  • Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
  • Compact design fits most gate and commercial door operators
  • Compatible with 811LM 813LM and all MAX remote controls
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

  • Full 7' belt assembly for models 1270 1280 and 1280R
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

  • Serrated flange face to provide locking
CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
K75-19985

LiftMaster Clutch Pulley Assembly

  • Fits model H operator with Logic 5
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
109837

FAAC Gearmotor for Sliding Gates Model 844 230V 1p

  • Gearmotor for sliding gates with max. weight of 1800 kg 844 ER Z16 for rack applications
  • Ideal for commercial and industrial applications
  • Anti-crushing safety
  • As the gearmotor is non reversing no electric locks need be installed
  • In the event of power failure the key-operated release device makes it possible to open and close the gate manually
  • Twin-disk clutch in oil-bath
    • .......more details