Devanco Canada - Get The Right Garage Door Opener‎ and Parts

H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GALV-343-6-144-R

Torsion Spring .343 x 6" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft
Galvanized

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

TDC48-08

LiftMaster Trolley Chain Pack #48 700LBS 8ft Door

Chain pack only
TDC48-08 is a #48 Chain Pack Kit for 8 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 8' commercial doors.

MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

Sold individually

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

2110-700

Linear Idler Assy Large Gate

MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

19-40ML-SS

Master Link #40 Stainless Steel

For #40 chain

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

An original Whiting assembly

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

Electric motor only with instant reverse

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

E/0172/166

Automatic Systems Spring Assembly

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

5001-10-BRONZE

Residential Side & Top Weather-Strip 10' Long - Bronze (FF)

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

GS-RA-01-BLACK

Guide Seal Reverse Angle Black Sold by the Foot

K72-12532

LiftMaster Output Shaft Kit J

Also known as: 308116010J 310-116010J 308116010JK 310116010J
Compatible with LiftMaster® Model J Commercial Door Operators

E/BLOP/118

Automatic Systems Option Double Limit Switch

WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

For use with various LiftMaster® Commercial Door Operator Models

K003-KEY

Replacement Key for 3BXLT Key #3

Replacement key only for key #K003

SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

5-38-11

2" Horizontal Track Set 9'6" (8ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

For use in DW-3S and DW-TR air switches

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (10) sets of 2

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers

N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-L

Torsion Spring .262 x 3-3/4" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

PUSH180

Manaras Contact Block NO XB4/XB5

K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

Also known as: G233001 233001 23-3001
For use with various LiftMaster® Commercial Gate Operators

BEA-10EABA

BEA Bracket Accessory for Eagle Artek

BEA-10PS12-24

BEA Power Supply UL/ULC Listed

BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

Bracket only for modular LED lights.

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

.......more details

User Guide Datasheet

2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

2200-886

Linear Sprocket 50B20 1" Bore

2100-529

Linear Woodruff Key #15 1/4 x 1"

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2400-407

Linear Ste Screw Brass Tip 5/16-18x5/16

2200-274

Linear Pillow Block Bearing 1"

2200-015-UPS

Linear Collar Set 1B 9/16 LTB

2100-1661

Linear Plate Torque Limiter VS/GSLG-A

210265

Skylink Case Cover Atoms Pro Logo

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

For use on Mega-Arm gate operator
Hardware kit MA033 NOT included
Red & White Retro-Reflectorized DOT Tape

XBA3HF

NICE L/MBAR Control Logic Board Hi Frequency (SPXA3HF)

Exactly the same board as XBA3/U just rated for higher cycle per hour because it has a built in fan on it.

SB257B2

NICE Filter Board w/T3.15A Fuse

GHW-311-1.5HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1-1/2 HP 115V 1P with ECB

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-200-17-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

OPH-6533-M-N1-LH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

202-0019

TNR Bottom Bar Arm Black Harness 75D ** Price by Quote Only

same as 2622126

MT21-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty