Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Dock Equipment
D4-36

Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
  • 3 holes
LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 3 1/2" L x 6" W 3 1/2" Projection
28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

  • 4" deep (projection) x 20" tall x 12" wide
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
HRB-7

High Riser Bracket for 7" Above Dock or Higher 7"

  • High Riser 7" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
684-33-104-A

Universal Bracket 2.25" x 2.5" x 12" w/1" x 12" Plate

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

  • High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
DS-REPAIR-KIT

Inflatable Dock Seal Patch 30" x 30" Vinyl with Glue

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details