Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MD00422

Micanan Lovejoy Rubber 3JE Sleeve

MK-00605

Micanan Double Limit Switch

VBELTB30

Manaras VBelt 5L 30" Type B (5L330)

For models OTH OTBH OSL
Same as 5L330

PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

SL14COP-50

Copper Sleeve 1/4" 50 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST14COP

26253

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MV-00014

Micanan Key Switch O/C Tamper Proof Nema 4 Surface Mount

TXMQ-2:1

Grove Gear Gearbox 2:1 Ratio 56C

To replace serial # 70518900

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

S142ARNN115

Carlo Gavazzi Amplifier 115V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

MK-00398

Micanan Capacitor 370V 20 Mf

For limited duty 220V operators

9271431440

Spring Wire .289 x 2.625 x 144" Coated RAW LH

.289 x 2-5/8" x 12'

MD00020

Micanan Sprocket 50B40 X 1-1/4"

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

Activates one GRD gate receiver and up to three separate Delta-3 receivers
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
Frequency: 310 MHz

.......more details

Programming Instructions

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

12141

Doorlec Brake Caliper Assembly

MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-5053U-LH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

SL14COP

Copper Sleeve 1/4" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST14COP

SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

Custom spring made to order

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

MOV001

Manaras MOV Surge Protector

For 3-phase commercial operators
680V 1800V CL.V

K76-38732

LiftMaster Electric Motor 24VDC for HCT UL325

MK00641-NM

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored with 5 Relays (MK00736)

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays
Up to 20 transmitters can be programmed

Q088

LiftMaster Arm Assembly HCT K75-50146

Same as K75-50146

MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

Friction clutch mounted in between motor and reducer flange
Comes with cover and studs
New part number MP00232

PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 2HP Motors

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

1EBX

Explosion Proof 1-Btn Control Nema 7 & 9 Surface Mount

NEMA 7 & 9
Explosion proof enclosure
One button control
Button: 6 amp @ 125VAC
Normally open
Metal Enclosure: H=6-1/8" W=3" D=4-3/8"

.......more details

D-2-8

Keyed Disconnect Device 8ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

PRO-TB-7511-E

Micanan 3/4HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Non-Monitored board NO photoeyes

18002

Doorlec Reducer #80

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

Normally Closed
SGR13-193-028-D1-E-HS9-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NC relay output 15m cable

Specification sheet Wiring diagram

.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

Generates new code each time you push the button these codes never to be repeated.
99.99% works with most brands of garage door openers.
Ideal replacement for older or obsolete models.
Electronic scanners "code grabber" cannot duplicate the operating code.
Easy to install & program.
Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).

.......more details

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

CB53205000-KOR

Cable 5/32" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized cable 5/32" 7x19 5000ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

9150000626

3/32" Stops ONLY 100/pkg

Stops only 100 per pack

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

Upgrade option only - must accompany a door order

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

��This item is compatible with BRAKE011

41A2780

LiftMaster Chain Pulley Bracket Kit

Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
Compatible with ATS 2595 3595 models

43402

Carriage for R-99 Trolley

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

UR2

3M Gel Connectors Red 26-19 AWG 100/Pkg ** To extent of inventory. Repl. by 703-004

Scotchlok Insulation Displacement Connector
RUS Listed Full featured
Max. Diameter Insulation: 0.082" (2.08 mm)
AWG Wire Range: 19-26 AWG Solid Wire
Angle: Straight
Operating Temp. : -40 to 285 degree F. (-40 to 140 degree C.)

.......more details

SPRING-DUPLEX

Special Order Duplex Spring Assembly

Customer made to required size

28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

For door thickness 1-3/4"

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

MK-00012

Micanan Reversing Relay 24VAC Coil DPDT Flange Mount

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

6" bell 85 DBA

K76-34740

LiftMaster Limit Passpoint Kit

Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
For RSL12V RSL12VH
Aslo called Learn Limit Assembly Kit

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

225-120R

Electraray Rotating Warning Light Red 120V

Incandescent warning light
90 flashes per minute
Operating temp. 31 to 150 degrees fahrenheit
Height: 7-1/4" Diameter: 5-1/2"
Enclosure rating: Nema4X

9723-48

Whiting Pull Strap 48" with Steel Retainer

48" long

D22

Allen Bradley 110V Reversing Contactor

V1104-BLACK

Replacement Vinyl Only for 1104-Black 200ft Roll

Sold in 200 ft rolls only

41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 8 foot high garage doors
T rail assemblies ONLY.

110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

Compatible with all MVP receivers and operators
Quik-code programming no dip switches
Operate LED
Visor clip included
Power: Two 2032 batteries
Codes: 19683

.......more details

Programming instructions

990TP626

Trim for Panic Bar 98EO626

Trim for Panic Bar - 98EO626

G108019

LiftMaster Arm Clamp PVC

Used in connection with arm # G651209P

ME00001

Micanan Limit Shaft 3/8-1/2 x 9.75"

G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

Requires clamp model # G108019 sold separately
For use on barrier gate operator BG770

28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

Kit includes part # 28018A and # 28019A
Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
Includes 1 Belt Bullet and 2 Retainers

1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

Dual sprocket assembly for 3/4 HP chain drive operators.
Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S

AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S case while the receiver is built into a Nema 4 case
It is equipped with a NCC or a NOC relay
Battery is included # CR2032

Programming instructions

2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

37558R

Genie Belt Drive Sprocket Assembly

Complete assembly for the belt sprocket on top of the machine.
Works with the following models: IntelliG 1200 and IntelliG 1000

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login