Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Page:
Previous 123 Next

PRO-CUT

Pro-Cut Angle Cutter

Performs accurately up tp 2x2 angle.
Capacity is 12 gauge steel.
Weight is 18.5 lbs.

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
Weight: 8.6 kg / 18.9 lbs
Length: 77.2 cm / 30.39 inches
Max. Torque: 369lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

Sell Sheet

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

Z9959

Tension Release Hub Torsion Spring Back Winder

Safely back wind the torsion springs in tricky “slipped cable” situations
Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
Can be used on 1" solid or hollow shafts

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

Z9205

Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
Set door on shaft and multiply scale reading times 5 to give you the door weight
Bathroom scale not included

Drawing

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

For the temporary repair of a broken spring.
Wire size: .2187 - .3065

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

HSC-600-BOLT-3012

Replacement Handle Bolt for HSC-600 Swager Sold Individually

Replacement bolt only to bolt the HSC-600 handle to the jaws.
3 bolts are required
Sold individually

HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

Replacement bolt only (1)

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

RCB-DCB3-PRO

Pro Cut Handheld Chain Break #50 Chain Max Version 3

Adjustable chain holder accommodates #65 chain up to #50 chain
Quickly and easily handle chain rivet removal saving you time and effort
Includes two replacement pins inside the handle chamber

Z9955

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

CP35

Roller Chain Puller 35-60

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

Page:
Previous 123 Next