Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Chamberlain, LiftMaster Garage Door
MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
SD751L5-LH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
T105L5

LiftMaster 1 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

  • Swivel end
  • Nema 1
  • Same as Pull Cord
TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

  • Double Angle Rails for doors up to 14'6" high
  • Includes #41 chain pack
TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
41A4353-1

LiftMaster Header Bracket and Clevis Pin

658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

  • Outdoor Enclosure (NEMA 4/12)
  • Includes 10 feet of signal hose outdoor air switch and hose plug
  • OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.
821LMC-SENSOR

LiftMaster Extra Door Sensor for 821LMC White Units **to extent of inventory

  • Add control of your second garage door opener to Smart Garage™ Control myQ® Smart Garage™ Hub or myQ Garage®.
  • Secure control and monitor your second garage door through the myQ app.
  • Easy installation and programming.
95LMC

LiftMaster Keyless Entry Transformer

  • 2-wire hook up
  • 110VAC Input 22 VDC 2-Wire Connection
387LMC

LiftMaster Universal Wireless Keyless Entry

  • Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
  • Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
  • Wireless – powered by one 9V battery (included)
  • Weatherproof slide-up protective cover
  • Open or close the garage door without using a remote
  • Backlit keypad
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet