Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate Garage Door
461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

  • This rope is most commonly used on small overhead cranes and pulley systems.
  • Provides strength and flexibility but not a lot of wear resistance.
  • Cable break strength: 13600 lbs
SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
410-0003

Gateway Weather-Stripping 1-3/8" Gray For Roll-Up Door Tracks Sold per Foot

1050-STANLEY

Stanley 1050 Transmitter 310 Mhz 10 Dip Switch

  • Replaces 2-btn Stanley original remote
PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

  • Surface mount
  • Metal enclosure
  • Not CSA approved
  • Dimensions: 6" H x 2-3/4" W x 3-1/2" D
124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing

124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

  • For 1-3/4" thick door
3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys keyed alike
  • H=7" W=2-3/4" D=2-3/4"
JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:3A
  • ROHS compliant
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 2" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
Reference manualTechnical dataSell sheet