Devanco Canada - Get The Right Garage Door Opener‎ and Parts

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-109023

Programming Instructions

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

218189-01

Linear Trolley Assembly

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

HAE00001

Linear Wall Station

Wired wall station with light and lock features.
For LSO LDO LCO

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

3002-200FT

Gum Hose 1/2" ID 200' Spool

1/2" inside diameter
Installed in bottom "U" rubber for use as a safety edge

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

Black - for door thickness of 1-5/8"

1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

Black - for door thickness of 1-3/4"

1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-2-16'

Aluminum Bottom Retainer U-Shaped 16' Long***Actual Length 16'2"***

For door thickness 2"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

For 2" thick doors.

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-12FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 12' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 10' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

18-HWB-PAIR

Winding Bars Hex 18" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 7/16" at one end with a 1/2" outside dia. on the other end
Sold as a pair.

1104-10FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 10' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1106-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual fin vinyl

1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual fin vinyl

1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-8-GREY

Commercial Side & Top Weather-Strip 8' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

25-42-130

Extension Spring 7' Door - 130 lbs Yellow

Double - Loop
25" long 42" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-50

Extension Spring 7' Door - 50 lbs Red

Double - Loop
25" long 42" stretch 50 lb load
Sold individually
Rated for 10000 cycles
Same as part number 105

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-1 W #4029 360100

27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-2 W #4028 360000

27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2547

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

26-40026

Truck Door U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** DISCONTINUED

Aluminum extrusion construction
Cross Reference: W #1801

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

25-10577

Truck Door Cam Lock Handle Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Cam lock allows one hand operation and easily accomodates padlock or car seal.
Can be used as a lift handle in open position
Back plate is offset to clear bottom seal retainer
Spring assisted handle eliminates door bounce
Handle Keeper Sold Separately. Use part #25-10578

.......more details

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9005

Shaft Key Straight 3" X 1/4"

3" Straight Key
Zinc Plated Steel

Z9403

Coupler 1" Bore Adjustable Silver

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.35"
Painted silver

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

DM413

Cable Drum Standard Lift 12' 400-12 Pair

12 ft Standard lift cable drum. Aluminum die cast alloy.
Max. door height: 12'-1".
Rated lift per drum: 375 lbs.
Max. cable diameter: 5/32".
Mounting: 1" tube or solid shaft with 1/4" keyway.
Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)

.......more details

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

CBB532

Stop & Sleeve 5/32" 100 pair

Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)

H11G11

Hinge #11 x 11 gauge

11 gauge # 11 hinge - 0.93 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

RN1124

Roller 2" Nylon 4" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)

S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

Minimum door thickness 13/16"
Gauge: .109 Height: 6-7/16"
A pair includes one left hand and one right hand bracket.

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Aluminum eye ends are used (only on 5/16" eye cables)
Cable size: 1/8"

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X12PO50

Devanco Loop 4' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X15PO50

Devanco Loop 6' x 15' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

WHITING-DOOR

Whiting Special Order Plywood Core Dry Freight Door Price by Quote Only

Special order to customer's specs
Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
2" track and rollers for durability.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
4 rows of hinges.

.......more details

99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

Equivalent to 14-ga in strength

OTBH-6112-AM-ECB

Manaras Trolley Operator 1/2 HP 120V 1Ph Monitored w/Eyes ECB Apt. Model

A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
30 cycles per hour 100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 chain on all APT models
TTC standard on all models with BOARD070

.......more details