Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

  • Interlock switch is engaged by the door side lock and disables operator control.
OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6532-ECB-LH

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 312 MHz
    • .......more details
Programming Instructions
PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator

27-48-110

Extension Spring 8' Door - 110 lbs White

  • Single - Loop
  • 27" long 48" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

  • Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.
TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

  • Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
  • Three position direct connect tabs for commercial and residential garage door openers
Programming Instructions
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

ZT37028235

Firestar Shutter 540 Galv with Lock & Key

32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

  • Double - Loop
  • 32" long 48" stretch 100 lb load
  • Springs sold individually
Spec Sheet
1104-18FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Sold in 10' Lengths and cut to measure
  • Includes 10' Metal Washer Insert
  • Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper
735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

  • ID: 0.40625’’
  • OD: 0.8125’’
  • THK: 0.066’’
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
  • Comes with 02-403P NEMA 4 push button
Installation ManualManuel d'InstallationSell sheetBrochure
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

  • An original Whiting assembly
GAREX-SPEC-ORDR

Garex Light Commercial Door Special Order

  • specify size color details when ordering
  • Please call for pricing
OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
HW-BRG-1

Lynx Bearing 1" x 2" OD

  • 2 in total on a MCJH
CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
2110-274

Linear Clutch Shaft Assembly HSLG UPS

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

  • Continuous duty C-flange TEFC 60Hz
DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied
    • .......more details
OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

  • Monitored version with Nema 1 photoeyes
15-41B18LGH

Sprocket 41B18T 1" Bore

  • Also known as: 155016 41B18
  • 18 Tooth Sprocket #41 Chain (41B18)
  • Includes 2 Set Screws
CP-LEV-BRAKE

Lynx Brake Lever

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
SUPPORT008

Manaras Board Support 1" ** Special Order Only

017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

  • Price by Quote Only
CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

  • Used on the BL229 gate op.
15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

  • Special order to suit customer's needs
461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

  • Used on CPT-210 extrusion
BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
    • .......more details
D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

  • Video intercom including surface mounting housing
  • Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
  • LAN connection (PoE compatible)
  • 2-Way audio
  • Ultra-wide angle lens HD video 1080P night vision IR LEDs
  • 4D motion sensor
    • .......more details
Sellsheet
TRACK-SET-2LHR-F

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Front

  • Complete set - torsion front
GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
K41-0256-000

LiftMaster Interlock Harness IHSL24UL

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Amarr Residential Open Back Doors and Classica models
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
K07-3611

LiftMaster Disconnect Bushing

  • Compatible with LiftMaster® SL590 Slide Gate Operators
22019

Doorlec Push Button Contact Block N/O

OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
K005-KEY

Replacement Key for 3BXLT Key #5

  • Replacement key only for key #K005
5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC1222-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #41 chain pack (TDC41-10) ***Actual length 155"***

  • Double Angle Rails for doors up to 8'6" high
  • Includes #41 chain pack
041-0347-000

LiftMaster Camera Replacement Kit

  • Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-375-334-144-L

Torsion Spring .375 x 3-3/4" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
PUSH180

Manaras Contact Block NO XB4/XB5

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

  • To be used with the BEA-10LIGHT modules.
User GuideDatasheet
WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

  • Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
  • R-VALUE: 12.12 / 16.12
  • WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.
15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

210265

Skylink Case Cover Atoms Pro Logo