Devanco Canada - Get The Right Garage Door Opener‎ and Parts

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

LVB620-11/P1

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB620-11/P1

STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

75-10359

LiftMaster Brake Pad

same as K75-10359
For MJ / HMJ and MT / BMT operators

LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

Steel construction Zinc plated
Cross ref: Eberhard 4300

MB-01202

Micanan Electric Motor Only 1/2HP 575V 3PH Base Mount FR56

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-3/8"

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

6976.182.23.440

Whiting Single Spring Balancer Assembly .182 x 23" x 44" Shaft

12-000I-KEY

Spare Key for American Access Keypad

Spare key only for model 12-000I

RELAY068

Manaras Relay SPST 24VDC

1006-1-3/4-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

Liftmaster Chamberlain 041D7924-1
Required to add a second garage door opener to your 821LM MyQ Garage.
Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
Compatible with:
Green Learn Button (Billion Code 390MHZ)
Models: 1245 12551270 1280

.......more details

32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

Double - Loop
32" long 48" stretch 130 lb load
Springs sold individually

Spec Sheet

BPPN17510

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 120" (10')

27121-480V

Doorlec Electric Motor 1-1/2 HP 480V 3PH DC223C

GRX-40X13-134-WTE

Thermal Window Clear 40" x 13" for 1-3/4" Garex Door White Frame

For 1-3/4" thick door

K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

SM102

Miller Edge Signature Module w/Junction Box for 10K (T2) Sensing Edges

SM-102: Converts a 10K resistive signal
Module: 1.8”H x 1.25”W x 0.8”D (46 x 32 x 20 mm)
Junction box: 1.5”H x 4”W x 2”D (38 x 102 x 51 mm)
Module: ABS plastic with epoxy
Junction box: Galvanized steel
Module: NEMA 4

.......more details

BCSI-PM206

Pivin Drapeau Traction Chain #50 BCSI Gate Operator Sold per Foot ** Price by Quote Only

10TD433HH2

BEA 2-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

R2TAES

Erone Radium 2-Button AES128 Encrypted Mini Transmitter

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remote.
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Heavy-duty construction

.......more details

MM00078

Micanan Solenoid Lever Limited Duty MSI0094

O02R9506

AirLift O Ring Orig. Op-AirLift

MGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

F210B

NICE Adjustable Synchronised Photocells w/Blue BUS Technology Sold as a Pair

Pair of synchronised Photocells with built in transmitter for 8k2 resistive safety edges.
Transmitter is powered by one 3.6 V battery.
Receiver with BUS Connection.
210 degrees horizontal adjustment and 30 degrees vertical.
F210B can only be connected to 'BlueBUS' networks

MG123-BLACK-NM-U

Miller Edge Black Non-Monitored Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

The MG123 sensing edge is identical to the ME123 in shape and dimensions
The only difference is the rubber compound softer which makes it a bit more sensitive than ME123 (4-7 lbf vs 6-11 lbf).
Easy to install
Optimum size for 2 inch gate surfaces
Double-T design for added stability
Mounts vertically or horizontally

.......more details

BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
Compatible with the S50L a wireless edge safety device.
IP68 rated waterproof LED lights
Operating temperature: -25C - +60 C

.......more details

Installation Manual Manual d'installation

111-0060

RW Box Track #33 Black 8ft Up to 700lbs

Finish: Black enamel

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

Padded arm for MASDCBB3

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
The unit will feature a yellow circle learn button

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

2200-215

Linear Precision Bearing 5/8"

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

Upgrade option

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

Continuous duty C-flange TEFC 60Hz

K17-36530

LiftMaster Gear Reducer and Motor Pulley

Includes gear and reducer pulley motor pulley
Includes dual-set screw fastener
Groove-lock channel on each pulley
For LiftMaster CSL Series commercial slide gate operators

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-159-GALV-KEY

Tube Shaft 1" x 159 (13'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-129-GALV-KEY

Tube Shaft 1" x 129 (10'.75) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

OSH-6232-M-N1-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

BPPB17516

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 192"(16')

SHSS-38-1

Set Screw Square Head 3/8" x 1"

Natural black
16 threads per inch

H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G01-SS

Hinge #1 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K41-0243-000

LiftMaster Output Sprocket IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

For trolley operator

REDUCER012

Manaras Reducer DSM 70 44:1 FR56C

HARNESS116

Manaras Opera ECB070 and Drive

SHAFT048

Manaras Trolley Output Shaft

GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

SHAKER-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

Compatible with various LiftMaster® Swing Gate Perimeter Access Systems

E/1907/012

BLG76 Backup Spring Assembly

GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

Mounting plate for GH op

MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

Mounting holes: 0.275"

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

C-flange continuous-duty
For gearhead operator

MOUNTSHAFT013

Manaras Hoist Shaft Kit for GH GHW/C/X MGH MGHW/C/X

5/8D15LG

41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers

N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

GALV-375-334-144-R

Torsion Spring .375 x 3-3/4" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-312-258-144-L

Torsion Spring .312 x 2-5/8" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

Q520

LiftMaster Wiring Harness Kit CSW Motor K94-50286

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators

MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

Magnetic striped cards
Track II encoded
Low-CO magnetic stripe
Sold in lots of 25
Same as: 0-200025

2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

2400-416

Linear Dowel Pin .3752 dia x 2" Long

2200-274

Linear Pillow Block Bearing 1"

ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

25130

Doorlec Seal Oil CR6372

OTBH-6232-AM05

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details