Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

23-20088

LiftMaster On/Off Switch 120V 15A

Also known as: SN5530039 MA019

346

Cable Clamps Galvanized 3/16" Sold per piece

Galvanized malleable cable clip

.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

GAREX-READY

Garex Ready to Install Door Special Order

specify size color details when ordering
Please call for pricing

MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

K72-13057

LiftMaster Clutch Shaft Kit APT

Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.

5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K12-8034

LiftMaster Female Rod End LH

Upper rod end for BG770 BG790
Same as part # 12-8034

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

Standard 1/2 hp motor
Same as 20-3033-1

PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

Wall bracket only
4-1/2" projection

HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

Heater kit for pad mount 460V AC gate operators.
Includes transformer
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

PRO-HBH-10023U-L

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

KH-3.5

Magnetic Key Hole 3-1/2" Tall

Decorative key hole only
Black flexible magnetic material with deep embossed design

TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

Priced per each

H12G10-SS

Hinge #10 x 12 gauge Stainless Steel **NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

2B735

LiftMaster Main Board EL25 (041B0735)

Same as 041B0735

MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

11202

Doorlec Cap Screw 1/4"-20 x 4"

CABLE008

Manaras Disconnect Cable 25 ft

Cable 3/32"

MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

41A4813

LiftMaster Chain Pulley Bracket Kit

Fits chain drive models

41A7920-1

LiftMaster Hardware Kit

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1-1/4" solid shaft
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

10-3209_GATE_BRKT

LiftMaster Gate Bracket

Fits SL580GL SL595GL and new IHSL24UL INSL24UL models

1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

EQ2722

Skylink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

Galvanized cable 1/8" 7x7 500ft spool.
A higher quality cable than the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

For models: SL595-200-53

GUIDE014

Manaras Chain Guide

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

MO00001

Micanan Cam Plate Compression Spring (.178 ID)

2 required per operator
.178 ID x 032G x 55L)

K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

MD-00057

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

Complete brake assembly including 460V solenoid
Solenoid cover is sold separately # MM00011

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G02-SS

Hinge #2 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

39-10167

LiftMaster Clutch Disc for MH

K75-12492

LiftMaster Brake Kit 115V Units MH

H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

SLT14-22

Rolling Steel 3" Flat Slat 22-ga Galvanized

SLT2-20P

Rolling Steel 2" Crowned Slat 20-ga Primed

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 ***NLA

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

.363-6-LH-C

Torsion Spring .363 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 6" Length: 12 ft

.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 5-1/4" Length: 12 ft

.331-2-5/8-RH-C

Torsion Spring .331 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 2-5/8" Length: 12 ft

.312-6-LH-C

Torsion Spring .312 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 6" Length: 12 ft

.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

.306-6-LH-C

Torsion Spring .306 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 6" Length: 12 ft

.295-6-LH-C

Torsion Spring .295 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 6" Length: 12 ft

.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2" Length: 12 ft

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 1-3/4" Length: 12 ft

.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 2" Length: 12 ft

.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2" Length: 12 ft

RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles for a 12' door
Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.

.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

Control board for CSL24V and CSL24VH gate operators
014D1058M

SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

Actual length is approx. 20'-1"

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
Can be replaced in-field