Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Emx Industries Inc. Commercial Door & Gate Operator Accessories Vehicle Detection & Safety Acc. (Photocells)
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
D-TEK-MVP

EMX Industries 9-220 volt Loop Detector 2550-1

  • Wiring harness ( HAR-11) sold separately
  • Warranty 2 years
  • Aluminum RF shield housing
  • Loop diagnostics
  • Frequency counter
  • Control contacts (gold plated)
    • .......more details
Installation ManualSpec Sheet
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
USVD-4X

EMX Ultra Sonic Vehicle Detector 2700-1

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
ManualSell Sheet
ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output 2670-1 (Replaces 2500-2346-LP)

  • Trademarked Detect-on-Stop technology
  • Compatible with the Linear (OSCO) with APEX/APEX II controller
  • Also Compatible with -Advanced Access Automation/FAAC CSL2000 CSW2000 RSW1000 -All-O-Matic SL100-DC -Chamberlain/Elite SL3000 CSW200 - Intelligent Systems IQ500 IQ5000 -SECOM Late Model operators with 10-pin Molex connectors -Rotary Gate Systems SL1000R SL1000C SL1000I -TyMetal TYM 1000 TYM 2000 -Viking Access Models L-3 F-1 T-21...
  • Sold-state output indicating vehicle presence
  • Ignore cross traffic in tight spaces
  • Select for automatic sensitivity boost (ABS) delay fail safe/fail secure
    • .......more details
NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
Installation ManualSell Sheet
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
    • .......more details
IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

  • The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
  • The IRB-4X2 will work with any control board that accepts dry contact on the input.
  • The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
  • *Not for use in applications requiring UL325 compliance
  • Thru beam design is not affected by shiny surfaces
  • Wide 24˚ transmission angle allows easier alignment and increases reliability
    • .......more details
Installation ManualSpecification Sheet
IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

  • Designed to operate in areas with explosive environments.
  • NEMA 4 and 7 housing
  • NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
  • Copper free Aluminum with Epoxy finish.
  • Potentiometer range adjustment to allow more precise tuning to site.
  • Through beam design is not affected by shiny surfaces.
    • .......more details
Installation ManualSell Sheet
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
LRS-FP-100

EMX Sensor Flat Pack 100ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 100 ft of lead wire
    • .......more details
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
LRS-DB-100

EMX Direct Burial Sensor with 100 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
IRB-RET2-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

  • Universal UL325 Retroreflective Photoeye Kit
  • Compact design
  • Easy LED alignment
  • Easy-to-Adjust Ball & Socket Bracket
  • Rugged NEMA 4X enclosure
  • Integrated sensor hood improved reflector hood and ball & socket bracket
    • .......more details
Manual IRBRET2Spec Sheet IRBRET2