Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SPECIAL-ORDER-SS

Special Order for Stainless Steel Door Products

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
MD-00189

Micanan Roller Chain Waterproof #41 Sold by the Foot

36773R

Genie Carriage Assembly for 7' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
33101

Overload 0.90 to 1.50A

  • Setting range 1.1 - 1.6A
886LMW

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls and set up Wi-Fi directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • On/Off switch for deactivation of motion-detecting function
    • .......more details
MK-00172

Micanan Non-Resetable Analogue Counter 24V

  • Monitors door cycles
CP-BRAKE-DRUM

Lynx Brake drum

CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
5-36-8

2" Vertical Track 14-GA 13'-4" (14' door) Sold per Pair

029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 105" h
  • Price varies according to size
MR00006

Micanan Hand Chain Sold by the Foot

  • DOOR HEIGHT X 2 LESS 4 FT
60-8000-7

In-Tube Motor 110V for Screen Door

  • Replacement motor only
  • This is mainly a special pricing product DBS says that we have to contact them for any future pricing.
CF-101-24

Commercial Side & Top Weather-Strip 24' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-7

Commercial Side & Top Weather-Strip 7' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-14

Commercial Side & Top Weather-Strip 14' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
Additional arm accessories
BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

  • 15/32" bolt holes
.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

.207-3-7.5-LHW

Mini Storage Spring .207 x 3" x 7.5" long Left Hand

SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-300R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
CUSTOM-8X40SC100

Devanco Loop 8 x 40 Saw-Cut 100' Lead-In

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation manualManuel d'installationLoop placement guideGuide de positionnement des boucles
MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-U-BLK

Miller Edge MU22 2-Wire Universal Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
IRB-BX

EMX Industries Plastic Enclosure Only for IRB-4X Nema 4 Sold Individually

  • Includes housing and clear plastic front
MU22-2WIRE-U-Y

Miller Edge MU22 2-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

  • Used on BG770
  • Arm adaptor included
  • 15' x 2.5" square arm
  • Replaces 50ALUMARM
CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
ME120-BLK-2WIRE-R

Miller Edge Black 2-Wire NM Right Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
PRO-GH-10053U-L

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

  • Does not include the solenoid
  • Replaces BRAKEPART012
SPR50B12X1

Sprocket 50B12 for a 1" Shaft 1/4" keyway

  • ame as MD-00012
K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

  • For commercial operator model T
  • Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)
221816

Decorative Hinge Assembly Carriage Style 16" Malleable Iron Sold per piece (175260)

  • As seen on carriage house doors
  • Total length is 18" for hinge and strap assemby.
  • 1/4" thick
  • Mounting hardward sold separately
  • Sold per piece
60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

  • Use 80% less energy than incandescent or halogen bulbs
  • LED bulb included
5-30-7

3" Vertical Track 12-GA 12'-4" (13' door) Sold per Pair

  • Pierced track
LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

  • 10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
TRACK-3"-RAW-12

Raw Vertical Track 3" 12'-0" Sold per Piece

GAREX-DOORFACE

Garex Special Order Door Face Only

  • Ordered to the customer's exact requirements
MB-03004

Micanan Electric Motor Only 1 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

  • Sold as a pair (includes one left and one right hand)
  • Same as BB-5 LHR Reinforced
RS3346

Roller 3" Steel 3/4" Shaft 5.8" stem Heavy-Duty 6203 Bearing

  • Steel Roller Wheel diameter: 3" 5.8" Stem Overall length: 7"
  • Heavy-duty 3/4" shaft supporting higher weight load applications
MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

  • Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011
PRO-HB-5053U-LH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
BG770-50-53

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 575V 3 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
V1102-BLACK

Replacement Vinyl Only for 1102-Black 200ft Roll

  • Sold in 200 ft rolls only
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-3/8"
760130

FAAC Capacitor 115V 25 MFD

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

  • Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
  • As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units
MOD012

Manaras Non-Resettable Counter Modification Inside Control Box

  • An electromechanical counter is activated to count each complete door cycle.
MOD008

Manaras Double Limit Switches Mod. (Per Side)

  • An extra SPDT pole is available to control auxiliary features such as lights fans etc..
  • The additional pole must be specified on either the normally open and/or normally close contact as well as on the opening and/or closing sides
  • Modification upcharge is charged per side
41ASWG-0014SA

LiftMaster Rear Connector

  • Used on LA400 LA412 LA412-S
TRACK-GUARD48-NP

Track Guard 48" Tall Safety Yellow Sold as a Pair No Floor Plate

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5106 (right) and 60-50105 (left) sides
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TRACK-GUARD-36

Track Guard 36" Tall Safety Yellow With Base Sold as a Pair *** To Extent of Inventory

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5092 (right) and 60-5093 (left) sides
    • .......more details
TRACK-GUARD-48

Track Guard 48" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5094 (right) and 60-5095 (left) sides
    • .......more details
48"Track Guard Shop Drawing - Left48"Track Guard Shop Drawing - Right
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
5001-12-DK-BROWN

Residential Side & Top Weather-Strip 12' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-10-DK-BROWN

Residential Side & Top Weather-Strip 10' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-16-DK-BROWN

Residential Side & Top Weather-Strip 16' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-18-DK-BROWN

Residential Side & Top Weather-Strip 18' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-8-DK-BROWN

Residential Side & Top Weather-Strip 8' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
SBX-N4-P-0000-FD

Micanan Control Box Eurodrive Limit Box

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

  • Includes eye reflector and bracket
  • Same as MK00371 Eaton 1450E-6514
AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

  • Sold in packs of 10. Priced per transmitter
AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
AW14K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

  • AW14 18ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
AW14K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord

  • AW14 12ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
LITH-9V

Battery 9 Volt Lithium

PRO-GH-5011U-L

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MD-00173

Sprocket 50B60 x 1-1/2" 3/8" KW 2SS 5/16"

1-4-3

Spring Extension Clip Medium-Heavy

OES-5104

LiftMaster 2" x 2" PVC Channel 16ft

  • Connects the door to the edge kit. 16' total (sectional doors only).
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
029-98205

W-Style Replacement Door White Stainless Steel Package 029-98205

  • Replacement door size between 98" wide x 105" high
  • Painted white
  • Stainless steel package
HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
SPECIAL-ORDR-US

Special Order Item USA

  • Ordered to customer's specs
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
28103

Pillow Block Bearing Cast Iron 1" Bore

M10A

Safety Inertia Brake 1-1/2" Bore 8851 Torque

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Normal Torque: 8851 lbf.in
  • Locking Torque: 31509 lbf.in
Reference manualTechnical dataSell sheet
10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

  • A Whiting original part
  • Stainless steel bearings stainless steel shaft
26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
RW-TS-OPTION

Richards Wilcox Top Seal & Retainer Option Sold per Foot

  • Available option when purchasing doors
RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

  • As per customer's requirements
RW-DOOR

Richards Wilcox Door Special Order

  • Special order as per customer's requirements
PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator