Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

SHAFT048

Manaras Trolley Output Shaft

10TD900HH3

BEA 3-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
29140

Doorlec Transformer 230V pr 120V sec 50VA

  • 230V primary 120V secondary 50VA
CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

  • Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
  • MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC
GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
  • Oerating termperature: -22-140F
    • .......more details
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
2110-700

Linear Idler Assy Large Gate

MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-144-L

Torsion Spring .406 x 6" x 12ft LH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
E/0172/166

Automatic Systems Spring Assembly

22019

Doorlec Push Button Contact Block N/O

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
20W33A

LiftMaster Solar Kit 33-AH 12V ***Kit includes: 1x SP20W12V 1x A12330SGLPK & 1x K94-37236***

  • Kit includes: SP20W12V (1) SOLAR-PANEL KIT12V20W A12330SGLPK (1) BATTERY 12V33AHSINGLE K94-37236 (1) UNIVERSAL SOLAR HARNESS KIT-7AH & 33AH
  • Compatible with: RSL12ULMC gate opener
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
  • For gearhead operator
E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.
MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

ME00048

Micanan Keyway 1/4 SQ x 3/4" Long

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
50111

LiftMaster Center Support Bracket ATS211X-14 Sold per Unit

  • For 14 Feet ATS211X CD1014 Rail
GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MV00080

Micanan Emergency Egress Device 15ft

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (1) set enough for one edge
  • p/n 1804-1463
178B45

LiftMaster Curved Door Arm (K10-10203)

  • Also known as: 1010203 105004 10-10203 K10-10203
  • For use with various LiftMaster® Medium Duty Commercial Door Operators
P-9931R

Pulsar 1-Channel Receiver 318 MHz

  • Allstar compatible
  • Single channel receiver
  • 24V AC/DC
  • 8 dipswitches 318 MHz
PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35
GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
041-0035

LiftMaster Chain Spreader and Sprocket

  • For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
  • Complete kit includes: Chain Spreader Sprocket and C-Clip
  • This replacement part is compatible with the following models: 8580WLB
CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
INFLAT-DOCK-SHLTR

Inflatable Dock Shelter *** Made to Order Sold by Quote Only

  • Custom order item. Sold by quote only
S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
BEA-10PS12-24

BEA Power Supply UL/ULC Listed

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
210346

Skylink Tube Rail Belt 7ft Door

  • Replacement belt only
2400-416

Linear Dowel Pin .3752 dia x 2" Long

2100-1621

Linear Belleville Washer Retaining Disc

2400-501

Linear Retaining Ring

2200-042

Linear Sprocket 48B15 1" Bore

210265

Skylink Case Cover Atoms Pro Logo

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

  • Used on the BL229 gate op.
ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

  • For use on Mega-Arm gate operator
  • Hardware kit MA033 NOT included
  • Red & White Retro-Reflectorized DOT Tape
9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-200-11-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 11' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
15591

Doorlec "C" Clip 5/8"

2BXT

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

  • Surface mount
  • Non-Metallic
  • Open / Close
MOD021AA

Manaras Safepack 24V Control Circuit

  • This is an option when purchased with an operator
SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
2200-968-UPS

Linear Sprocket 40B22 1" Oxided UPS

LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
2100-1750

Linear Key Brake Disc 1/4 x 3/16 x 1-1/4

GALV-312-334-144-R

Torsion Spring .312 x 3-3/4" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

  • Price by quote only
GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
    • .......more details
Installation Manual Specification Sheet
GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized