Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

  • I-Beam chain rail for 3595 & ATS
  • Space required: 2" above heighest point of travel of the door
CB18A0500

Cable 1/8" 7x7 500' Galvanized

  • Galvanized cable 1/8" 7x7 500ft spool.
Comparison charts
MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

  • Polymer gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

  • Track only- no chain or hardware
25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

  • For operators made with a 5/8" shaft
  • For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017
Drawing
65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
Installation Manual
71-EB120H

LiftMaster External Brake Solenoid 120V with Cable

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
10W8

Resistor 10W 8K OHM

KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
45ACT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • AC Belt and Chain Drive models
  • Fits models LC500EVC HD420EVC PD622EVC
  • Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675
.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
380UT

LiftMaster Universal 2-btn Transmitter Gen 5***To extent of Inventory*** Use LiftMaster L992U as a replacement

  • The Universal Remote Control is compatible with most major brands of garage door openers gate operators and commercial door operators
  • Operates up to two brands of garage door openers eliminating the need of multiple remotes on your vehicle visor.
  • Universal compatibility allows you to operate two different garage door manufacturers and/or frequencies at the same time
  • Security+ 2.0®
  • Compatible with: LiftMaster® Chamberlain® Craftsman® 390MHz 315MHz 310MHz Security+2.0 390 MHz Security+ Rolling Code 315 MHz Security+ Rolling Code 390 MHz Billion Code 390 MHz Dip Switch (7 8 and 9 position)
  • Genie® 390 MHz Rolling Code (Intellicode) 315 MHz Rolling Code(Intellicode) 390 MHz Dip Switch (9 and 12 position)
    • .......more details
380UT Manual (EN/FR)
.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

  • For 1/3 HP and 1/2 HP operators only
1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

  • 2 required per machine
  • Sold individually
  • 1" x 15" long
.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
    • .......more details
1920

Whiting Top Closure Mounting Plate for Insulated Doors

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

  • For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)
K001A3200-2

LiftMaster Gate Receiver Isolation Kit

  • Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.
.218-2-5/8-RH-C

Torsion Spring .218 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2-5/8" Length: 12 ft
BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
CBC532

Thimble 5/32" - 100 per pkg

.225-2-5/8-LH-C

Torsion Spring .225 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

  • Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
  • Adapter plate holds mounting bolts in place for ease of mounting.
  • Cannot be used with Model GH 3HP.
ME116-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide-in edge for sectional doors.
  • With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
  • ME116 is resistant to flame water and most common greases and oils
  • Soft ends
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
    • .......more details
MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow T-astragal
  • Width: 4-3/8"
15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

  • 71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
AM-PC

Linear Proximity Cards - Linear Format ACP00739 25/Pkg

  • The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
  • Passive operation
  • Low-cost
  • Durable
  • 25 piece bulk pack minimum order
  • Dimensions: 3.4" L x 1.9" W x 0.13" Thick
    • .......more details
.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

  • Tie back chain only - Sold by the Foot
  • 3/16" Galvanized
7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

  • White rigid vinyl retainer with white flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
SSZP16-6

Solid Shaft 1" Keyed Zinc Plated 16'-6" (198")

K004-KEY

Replacement Key for 3BXLT Key #4

  • Replacement key only for key #K004
49564

Stanley Chain Drive Traveler

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Same as part no. 3701965 3703375 3702540
  • If trolley slider no. 24851 is also required order part number 49563
Installation InstructionsInstructions d'installation
7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

  • Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
  • Integral absolute encoder to control the door travel
  • 24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

  • Double - Loop
  • 32" long 48" stretch 100 lb load
  • Springs sold individually
Spec Sheet
.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: 9-volt battery included
    • .......more details
Programming Instructions
CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

  • 5/8" x 10-3/8"
  • Same kit used for MCJH except the HDC has 1 extra nut
9V

Battery 9V Alkaline Duracell Procell sold individually

30003

Doorlec Brake Solenoid 115V with wire leads

  • Works with all 115 Volt Doorlec Commercial and Gate operators
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

  • HID 26 Bit Format
  • 125 kHz
  • Sold in Lots of 100 - Price Shown is Price per Card
  • Small enough to fit on a key ring
  • Universal compatibility with HID proximity card readers
  • Provides an external number for easy identification and control
    • .......more details
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

  • 050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
  • Unit will feature a yellow learn button
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.283-2-RH-C

Torsion Spring .283 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

  • Guardian model
NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
2200-938

Linear VBelt 28 4L Cogged

620-100991

Linear Heater Kit Assembly 460V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
GSLG-A-143

Linear Commercial Slide Gate Operator 1 HP 460V 3 Ph - Heater not Included

  • Integral APeX Controller three-button control station
  • Variable speed settings- Up to 24" per second (soft start / stop)
  • Programmable speed control
  • Direct C-face drive with brake
  • Power on/off switch
  • #50 roller drive chain and sprockets
    • .......more details
PCBA-PLCD10

Dyna Hoist/Pulse Replacement LCD Assembly Pulse 500 Series

26-945215

Truck Door Intermediate Panel (11.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
K94-36891

LiftMaster Battery Wiring Harness 7AH

  • For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators
OPH-6532-0M00

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
OSHW-6533-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
OSHW-6113-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
  • This end cap will also work on the CPT223 extrusion
112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
  • Works with TDC12 & TDC22 Maxum operators
MGHW-6113-1M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
TDC1222-20

Liftmaster Comm. 20FT Trolley Angle set (10-5820-P x 2) and #41 chain pack (TDC41-20) and spacer pad (71-10324***Actual length 275"***

  • Double Angle Rails for doors up to 20'6" high
  • Includes #41 chain pack and Spacer pad part # 71-10324
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
1-1785BL

RW Spring Bolt 514 x 2 Black

  • Housing: Cast iron 5-1/2" H x 2-7/8" W
  • Bolt: Cast iron bevelled
  • Keeper: Surface mount
  • Chain: Black 36" long with ring Finish: Black
LMEOLRES-10

LiftMaster End of Line Resistor 10K

  • For use with various LiftMaster® Commercial Fire Door Operators Gate Operators and Extended High Performance Release Devices
510.5423.00

Whiting Side Seal Upgrade for DF Door OLD 5423

  • Upgrade when purchased with a complete door
610.5600

Whiting Panel Option for 5600 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
206-5017

Blue Giant Side Weather Seal 58"Auminum/Rubber Fits 6ft Dock Set of 2 *** Price by Quote Only

  • Gaps of up to 1" (25mm) can exist between the pit wall and the dock leveler sides
  • 58" long weather seal made to fit 6ft dock leveler
OSHW-6113-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
MKTG-1031-1

EMX Pastic Screw for IRB-4X2

  • Replacement screw only
PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PRO-HBH-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
MYQ-D49TCXB

LiftMaster MYQ Video Doorbell

  • Best-in-class Visibility: See every detail with 2K video and a 150° lens.
  • Color night vision keeps your view sharp around the clock.
  • Motion Detection: Get real-time alerts when motion is detected.
  • Easy Setup and Recharge: Install as a battery or wired solution. To recharge remove and plug in unit.
  • Stay Connected to Your Front Door: Get alerts when a person is detected.* *Available with a Video Monitoring Plan (sold separately).
  • Extreme Weather Compatibility: Built to perform in extreme weather from -4°F to 122°F.
    • .......more details