Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MV-00305

Micanan Wireless Pull Cord

MV-00015

Micanan Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

Surface mount

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

PRO-J-10021-U-RH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-7543-U-LH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

BOLLARD_4'

Bollard 6" Dia. x 1/4" x 48" High Capped (w) Base Yellow Powder Coat

6" Diameter 1/4" Steel Wall 48" High Base Plate is 10" x 10" x 1/4" Thick 5/8" Holes for Mounting Powder Coated Yellow

PRO-GT-15083-U

Micanan 1-1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10021-U

Micanan 1HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-5011-U

Micanan 1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 507
Reverse side is #431 Bright White

Colour chart

.319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

PRO-APTB-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

K001A6426-2

LiftMaster Control Board RSL12V/RSW12V

PRO-TB-5023-U

Micanan 1/2HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5038-U

Micanan 1/2HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7244

Econo Caution Sign French 14" x 10"

PRO-LTB-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

Tie back chain only - Sold by the Foot
3/16" Galvanized

60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Claw" Like Bottom Assures Dependable Grip on Any Surface
Chock Fits Snug Under Tire Contour for Maximum Holding Power
Often Preferred For Snow and Ice Conditions
Light Weight and Reliable
Size: 7" wide x 11-1/2" long x 8" high

.......more details

88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
Galvanized Steel Sides
Size: 11-1/4" wide x 14" long x 14" high

60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

MSC330V53-BULK

Motor Start Capacitor 330V 53-64MF

CP-SH-58-1212

Lynx Clutch Shaft Only for MCJH 5/8" x 12-1/2"

No pulley

TA-2-SL-0800-32R

Assembled Track Set 2" Std Lift 8' H 32" Radius

Includes horizontal and vertical tracks

RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MM00021

Micanan Disconnect Lever MSI0012

MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

Used on PRO-HHD
1 required per operator

SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

Ratchet Bar Not Included
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Sold in 10' Lengths and cut to measure
Includes 10' Metal Washer Insert
Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper

C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

MK00594

Micanan Auxiliary Contact Block 100FA40

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

B

Molded Rubber Bumper Black 24" L x 12" W 3" Projection 4-Hole 2 Reflectors Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

MM00447

Micanan Idler Wheel PRO-APTC

ME00071

Micanan Idler Shaft PRO-APTC

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB810-36

Laminated Bumper Standard Black 10" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

Screw together window kit
Plexiglas window
Frame size tip-to-tip: 26-3/4" x 14-1/2"
Cut-out size: 25-5/8" x 13-3/8"
Vision area: 23-7/8" x 11-9/16"
Different glass options and frame colours are available upon request

.......more details

MK-00019

Micanan 3-Phase Overload Base

Base only

T010

Manaras Trolley Track 10ft for 1/2HP models *Actual length 150"*

For models MLT/OTH/OTBH 1/2hp only used with Chain #48 (#410)

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

Powdercoated Grey
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
Powdercoated Grey
For use with 7/16" stem rollers

WRW

Erone Wiegand Wireless Receiver 433MHz

433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
KeeLoq® Rolling Code technology ensure ultra-secure transactions.
Output: Wiegand 26 bit
Power requirements: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
Compatible with Centaur and any 26 bit Wiegand-capable systems

.......more details

Wireless System Chart

02-404

LiftMaster Key Switch Assembly On/Off Nema 4/12 **DISCONTINUED

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Non-Tamperproof
OPEN/CLOSE spring return to center (OFF) key removable in center position only.
Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Die cast metal enclosure

.......more details