Devanco Canada - Get The Right Garage Door Opener‎ and Parts

502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

Allows for operation of a door by an auxiliary chain hoist.
Hoist mechanism is coupled to front end of drawbar
MUST specify door width and position of hoist (left or right)

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original

SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

.207-2-5/8-RH-C

Torsion Spring .207 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .207 ID: 2-5/8" Length: 12 ft

PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

BK310

Jamb bracket J-10 #10 12 gauge

Sold by the piece
Height 4.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

BK306

Jamb bracket J-06 #6 12 gauge

Sold by the piece
Height 3.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

Same as K-SPLONG

OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

OSH-6213-ECB

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming Instructions Instructions de programmation Sell Sheet

LEVER056

Manaras Disconnect Lever

Works on newer model MJH

20386R

Genie Sequencer Board AC Screw Drive

For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
Replaces part number 31184R

MOD021A

Manaras Safepack 24V Control Circuit

A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

Gearbox for GH operator

APOW3

LiftMaster Transformer 120V input 34VDC output

Plug-in AC/DC converter
Used as a replacement transformer for all LA400 models

GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

MH00015

Pillow Block Bearing 1" UCFL 205-16

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
Each pail contains 72 towles
6 pails per case

784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

Serrated flange face to provide locking

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes
Comes with 02-403P NEMA 4 push button

Installation Manual Manuel d'Installation Sell sheet Brochure

178B34

LiftMaster Straight Door Arm

Will work with most residential garage door openers
Also known as: 012385041783 178B33 178B34 4178B0034B

7001-18-CREAM

Commercial Side & Top Weather-Strip 18' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

BOARD075E

Manaras Replacement Board Kit (No Monitoring)

Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
BOARD070E is for standard operators without the monitoring function
For all Manaras operators built after October 2010
On-board 390MHz radio receiver accepts 50 remote controls
For older models built before October 2010 use BOARD060 or replacement kit BOARD065

Replacement Chart Guide de remplacement

ED-1300

Devanco Citrus Degreaser & Cleaner 425g

This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
Leaves no residue
Pleasant citrus scent

Material Safety Data Sheet Fiche Signalétique

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

For use in Liftmaster 3500 3800 and 8500 models
1 year warranty

Installation Manual Manuel d'Installation

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Programming instructions Instructions de programmation

AA

Battery AA Alkaline Duracell Procell Sold Individually

Sold Individually

813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming Instructions Instructions de programmation Sell Sheet

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

Assembly includes: Circuit board end panel and light socket
For chain drive units with two lights
Fits 2265 2565 7420 PD610 PV612C & PD612K
Last letter of the part # indicates revision date
Also known as 41A5483 41A5483B

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

MJ00003

Micanan Brake Drum ** To extent of inventory

Fits all Micanan commercial operators equipped with a solenoid brake
Available only in complete kit # MJ00013

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

1920

Whiting Top Closure Mounting Plate for Insulated Doors

HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

200ft spool of vinyl insert.

1006-1-3/4-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

For door thickness 2"

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RN1324

Roller 2" Nylon 4" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.71"
Box qty: 100 Box weight: 32.2 lbs (2-4-13 White Nylon)

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

MB-01202

Micanan Electric Motor Only 1/2HP 575V 3PH Base Mount FR56

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-5053-PANL

Micanan 1/2HP 575V 3P Gearhead Operator N Controls *** Price by Quote Only

Special Order by Quote only

25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Aluminum eye ends are used (only on 5/16" eye cables)
Cable size: 1/8"

86-925

Gel Connectors Red 19-26 AWG 100/Pkg

Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
Quick one-step splicing – insert unstripped conductors and crimp
Use with solid copper single-conductor wire 19-26 AWG
Maximum insulated O.D. of .066 in. (1.68 mm)
Permanent connection- once crimped they cannot be reused
Use 12 or 3 ports as needed

.......more details

R2AES

Erone Radium 2-Button AES128 Encrypted Transmitter

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remote.
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Heavy-duty construction

.......more details

10TD900PB

BEA Wired Transmitter 900mhz Flagged Flag Connectors AAA Battery

Multi-colour LEDs on receiver provide installer with visual notification of signal strength and activation status.
Frequency: 908-918 MHz
Radio Control Type: Digital
Programmable Capacity (standard): 75/unlimited universal
Operating Temperature: -10-55C

BGARMFOAM

TECHNA Barrier Gate Arm Foam Insert

esigned for use with the TECHNA Barrier arm this 14' roll of extruded foam offers additional protection reducing the chance of vehicle scratches •IP68 rated waterproof LED lights •Operating temperature: - 13F to 140F ( -25C - +60 C) •Weight ~2lbs

L955W

LiftMaster Multi-Function Control Panel Secuirty+ 3.0

Includes a large push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
Compatible only with LiftMaster Security+ 3.0™ garage door openers.
Warranty: 1 Year

Installation Manual Manuel d'Installation Compatibility Chart 2025 Comparison Chart 2025

A10U49

Erone Long Range UHF Reader U4GO 33FT

The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
Stand-alone or Wiegand mode
Up to 33' (10 m) read range
Detects vehicles up to 50 mph (80 Km/h)
Includes receiver power supply and mounting bracket

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

K41-0387-000

LiftMaster Maxum Encoder Drive Sprocket & Hardware

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

.......more details

7131

Whiting Brush Side Seal Assembly; 7/8"

Quote required prior to sale to ensure correct fit

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details