Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 24"
LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 300 lb load
K94-36934

LiftMaster Main Wiring Harness L5

K79-32927

LiftMaster Control Board Autogate *** Not Available

  • Replacement control board used in various Autogate Operators.
  • Autogate is a gate operator manufacturer that utilizes LiftMaster control boards in their operators
  • Formally AG001
MM00008

Micanan Frame GHC MSI0034

2807.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Curbside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • For Roadside order part # 2806.139.130
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
OGH-6533-CONT

Manaras 3/4 HP 600V 3Ph Gear Head Operator Contactor Model

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

26CW94521-CUT

Truck Door Intermediate Panel (11" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
OTBH-6212-CONT

Manaras Trolley Operator 1/2 HP 240V 1Ph Contactor Model

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
MU22-2WIRE-U-BLK

Miller Edge MU22 2-Wire Universal Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
221816

Decorative Hinge Assembly Carriage Style 16" Malleable Iron Sold per piece (175260)

  • As seen on carriage house doors
  • Total length is 18" for hinge and strap assemby.
  • 1/4" thick
  • Mounting hardward sold separately
  • Sold per piece
AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

COUNTER-SHUTTER

Counter Shutter Made to Order

  • Solid aluminum panels constructed of interlocking extruded aluminum slat sections.
  • Each slat is made of continuous 0050" (1.3mm) thick aluminum extrusion 1 1⁄2” (38mm) high by 3/8” (9.5mm) deep.
  • A perfect solution for service counters booths ticket windows and kiosks.
  • Made to Order item
  • Sizes vary in width from 3'-0" to 16'0" and in height from 2'0" to 10'0"
  • Never exceeds 100 sq/ft
    • .......more details
MK00709

Micanan Varistor Harness 460V with Red Wires

WINDOW-SP.ORDR

Special Order Window

  • Made to customers specific requirements
26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
PRO-GH-10083U-L

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MP00089

Micanan Track and #41 Chain for 10' h Door *Actual length 150"*

  • For 3/4 & 1 HP Micanan trolley operators
02-103-FR

Push Button Station 3-btn Surface Mount French Nema 1 Metal Housing

  • PBS-3S
  • Ouvre-Ferme-Arret
  • Momentary contact
  • Metal enclosure
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
    • .......more details
MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

  • For PRO-LJ LH LHAB
MD00020

Micanan Sprocket 50B40 X 1-1/4"

K10-37955

LiftMaster Chain Guard with Mounting Hardware HCT

PRO-HBH-7553U-L

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
18002

Doorlec Reducer #80

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

  • Normally Closed
  • SGR13-193-028-D1-E-HS9-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NC relay output 15m cable
Specification sheetWiring diagram
510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

  • Upgrade option only - must accompany a door order
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
98EO626

Panic Bar for Pedestrian Door- Exit Only

  • Panic Bar for exit only
108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

  • Usable length is measured between the shoulder and the cotter pin
111526.0001.S

Overhead Limit Shaft for RHX

  • For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.
K001A5859

LiftMaster Elite Dual Motor Circuit Board Q171 ** NLA

  • Old style fits SL3000 CSW 200 with Q019 boards only
  • This board has been discontinued and no replacement available
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

  • Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
  • Uses a high surface area aluminum heat emitter to eliminate the need for a fan
  • Provides low-radiation and high-convection heating in the enclosure
  • Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
  • Compatible with operators SL575 SL585 and SL595
7001-8-CHARCOAL

Commercial Side & Top Weather-Strip 8' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
K180B0325-5

Rocker Switch / Circuit Breaker 250VAC

EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
510.7302.07

Whiting Stainless Steel Interior Hdwr Pkg DEH Steel 7-Panel Door Up-grade Option

  • Double end hinge option
POCKETWHEEL005

Manaras Pocketwheel Opera

PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
Programming InstructionsCompatibility chart
PBS3-BLACK

Replacement Button Only - Black

  • Replacement button for 02-403P
OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual Sell Sheet
8087.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Curbside with Cones

  • An original Whiting assembly
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

  • Replacement board for fire door model FDCL
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
MK00799

Micanan Smart 10.0 Full Feature Circuit Board Non- Monitored with H.D Relays (MK00701-NM)

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board does NOT have P1 & P2 terminals
Instructions Manual
MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
K23-19380

LiftMaster Reset Switch for LA400

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
K77-36541

LiftMaster Antenna

  • For various gate operators
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

.331-6-LH-C

Torsion Spring .331 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 6" Length: 12 ft
.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
1715.20

Whiting Stainless Steel 2-Hole Grab Handle

BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
OGH-6215-ECB

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

  • 1000 ft range
  • 2016+
  • This receiver will accept 8 Equinoxe O/C/S remotes
  • Nema 4
Programming InstructionsInstructions de programmation
OTBH-6434-1-ECB

Manaras Trolley Operator 1 HP 480V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6234-1-ECB

Manaras Trolley Operator 1 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OSH-6233-ECB

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OHJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OHJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V 1Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

  • For door thickness 2"
HSC-600-JAWS

Replacement Jaws for Hand Swager

  • Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model
7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
MH00015

Pillow Block Bearing 1" UCFL 205-16