Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair ** To Extent of Inventory

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

12-ga angle

2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

ME00006

Micanan Intermediary Shaft 1" x 10-7/16" c/w KW

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

SP-24

EMX Surface Mounted Loop Pad e/Wire Guard

Designed to fit between the guide rails in automated carwash systems.
Made with durable polypropylene this sealed pad can stand up to carwash detergents.
Able to detect up to 30 inches high when coupled with EMX’s line of vehicle loop detectors.
Size: 23.75” x 23.75” x 1”
Material: black polypropylene
Lead-In: 50 feet shielded twisted pair

.......more details

41D9044

LiftMaster Battery/ Logic Board Cover RJO

Compatible with 8500 and 8500W

31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

Complete cable locking system for a 1-3/8" or 2" door Keyed alike
System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
Also works for for 1-3/4" doors
T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)

192417

Torque Force Pocket Guide 3.5" x 5" 195307

Imperial multiplier
Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

Illuminated Keypad
Weather shutter protects keypad from elements
Wireless Installation
4 digit codes for maximum security
Allows for access without remote or keys
For use with any UL325 commercial operator that has an LX100 or LX900 board

.......more details

Programming instructions

MGR20-Y-2R-04

Miller Edge Sensing Edge Round Yellow 2-Wire Right Hand Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

HA-3001

Hose Anchor for Treadle Hose

Made of cast iron

CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

For trolley operator

DDO8900W

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
Works with myQ® Business™ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
Built-In Wi-Fi® for simple operator internet connection.
Opens 50% faster in the up direction.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

CGH503L5-RH

LiftMaster Gearhead with Brake & Carwash Mod 1/2HP 208/230/460V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

2705.135.140

Whiting Curbside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

106141

Marantec Shaft Adapter

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

XBA3/U

NICE MBAR Replacement Logic Board

10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

Product guide

41D541

LiftMaster Battery Cover for 877MAX Beige

Replacement battery cover only
Also known as 041D0541 41C541 41D541

DMB51CM24

Carlo Gavazzi Mini Multifunction Timer

Mini DIN Rail Mount Multi-Function Timer
24VDC and 24-240VAC/DC Supply Voltage
0.1 Seconds to 100 Hours Timing Ranges with Six Sub-Ranges
Diagnostic LEDs
Only 17.5mm wide

LA500SLRHARN

LiftMaster Solar Harness Kit LA500

12-3000

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

Fits SW470 gate operator

12-4164

Flange Mount Bearing Self-Aligning

Works with SL575 SL580 SL585 SW470.SW470 gate operator
Same as K12-4164 124164

CGH103L5-LH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Left Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

.289_3-3/4"-LH

Torsion Spring .289 x 3-3/4" x 12ft LH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

SL585103UL

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
Operator Duty Rating: 20 cycles per hour
Wormgear Reduction: 20:1 Wormgear Reducer
Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
Chain: #50 nickel-plated (25ft. supplied)
Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

M-0131

Autogate Proximity (Limit) Switch

K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

15-41B10G1

Sprocket 41B10T 3/4" Bore

Also known as: 15-41B10GXX 15-41B10G1 155010

.25W8.2

Resistor 1/4 W 8.2K OHM

Dimensions (W X H X L) 6 X 15 X 3 CM

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
Will also work on L3 L4 operators

17350

Doorlec Cable 5ft with Antenna

85503-267

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera ** DISCONTINUED

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

Installation manual Manuel d'installation Sell sheet Receiver Logic Board Conversion List

PMT20I

Carlo Gavazzi Through Beam Emitter Side Only

PMT series features include immune to ambient light precise detection through narrow beam LED-indication and output function switch selectable.

Installation Manual

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

C-24X12-134-BLK

Thermal Window 24" x 12" for 1-3/4" Door Black

For 1-3/4" thick door

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

21001

Limit Switch Micro

26117

Doorlec Limit Cam Retainer Plate with Fasteners

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"
2 NO contacts and 1 NC (stop)
Nema 3R 4 12

3BX

MGR20-B-2U-PER-FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

41D4509

LiftMaster Motor Kit ATS211

Also known as: K75-16424 41D4509 123D0155 123D155

111503.0002.S

Overhead Gear Reducer 40:1 RHX

K94-37871

LiftMaster Reset Switch and Harness SL595

For model SL595 slide gate operators

MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

15 tooth sprocket for #40 chain

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

K23-34815-1

LiftMaster Stop / Reset Switch Black Face

For use with SL595UL Series heavy-duty industrial slide gate ops

K75-36260

LiftMaster Lock and Keys

For various Liftmaster commercial slide and swing gate operators.

RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete *** No Longer Available

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** No Longer Available

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

.234-3.5-11.25-RHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Right Hand

.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

29138

Doorlec Transformer 208V pr 120V sec 50VA

208V prImary 120V secondary 50VA

Q238

LiftMaster Gate Adjustment Switch K75-50339

This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING

CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized Cable 1/8" 7x19 5000ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

K77-37856

LiftMaster Front Cover Grey RSW12U CSL/CSW24U

Front cover only
HEIGHT: 18-1/4 Inches
WIDTH: 15 Inches
DEPTH: 13 Inches

LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output 2670-1 (Replaces 2500-2346-LP)

Trademarked Detect-on-Stop technology
Compatible with the Linear (OSCO) with APEX/APEX II controller
Also Compatible with -Advanced Access Automation/FAAC CSL2000 CSW2000 RSW1000 -All-O-Matic SL100-DC -Chamberlain/Elite SL3000 CSW200 - Intelligent Systems IQ500 IQ5000 -SECOM Late Model operators with 10-pin Molex connectors -Rotary Gate Systems SL1000R SL1000C SL1000I -TyMetal TYM 1000 TYM 2000 -Viking Access Models L-3 F-1 T-21...
Sold-state output indicating vehicle presence
Ignore cross traffic in tight spaces
Select for automatic sensitivity boost (ABS) delay fail safe/fail secure

.......more details

029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

Complete Replacement door size between 98" wide x 100" high
Painted white
Stainless steel package
Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
Price varies according to size

JB-02

Miller Edge Junction Box Metal

For commercial overhead doors that use coil cords or retracting reels
Standard metal junction box with cover
Includes 1 x 90-degree connector 1 straight connector
Includes strain relief + 2 wire nuts + pop-out holes
For single-angle bottom bar of rolling steel door
Also compatible with sectional door

.......more details

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.

1209

Whiting Roller Hinge Complete

10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

This isneeded to change over to their current motor

050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
Unit will feature a yellow learn button

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

105380

Amarr T-Handle Lock Kit for 2" Thick Doors Black

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109904 also this is the hardware required for installation or the lock will not work.

CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

41A4353-1

LiftMaster Header Bracket and Clevis Pin

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.