Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

27-48-200

Extension Spring 8' Door - 200 lbs Tan - Sold Each

Single - Loop
27" long 48" stretch 200 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

50346

Doorlec Electric Switch and housing for Mechanical Edge

894LT

LiftMaster 4-btn Sec+ 2.0 Learning Transmitter

Liftmaster 894LT is designed for Sec+2.0 and Sec+ applications
Replacement for Models 374LM and 974LM.
Compatible with the following Sec+2.0 Sec+ Dip-Switch when cloning other Dip-Switches Remote Controls such as: 811LM 813LM - Sec+2.0 331LM 361LM 362LM 363LM 333LM - 315Mhz Sec+ 61LM 63LM - 390MHz Burst Technology.
Sends out multiple frequencies on the same code at the same time (Sec+2.0 only) 2 and 4 button options
Typically used in gated communities along with a garage door opener.
This single remote control will allow you to copy the code used for the gate instead of carrying 2 remote controls in the vehicle.

.......more details

Programming Instructions Instructions de programmation Sell Sheet

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

EHJ-311-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3

Original Richards-Wilcox part

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

95-00115

Truck Door Rivet 1-1/8" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0036

1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/4" commercial doors.
Color: Black

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

MA011

LiftMaster Magnet

Mega Arm Steel Magnet Assembly for Cam Arm

FM145

Nortek Mighty Mule Pedestrian Gate Lock Bulldog

Bulldog Pedestrian Gate Lock secures walk-through gates in a locked position.
The Bulldog lock is mounted horizontally and it locks the swinging pedestrian gate to a post or column

MM00011

Micanan Brake Solenoid Cover

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

19-41ML-NP

Master Link #41 Nickel Plated

For #41 chain

1104-10FT-GREY

Residential Side & Top PVC Weather-Strip with cap 10' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

27-48-140

Extension Spring 8' Door - 140 lbs Blue

Single - Loop
27" long 48" stretch 140 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

2807.206.325

Whiting .206 x 2-3/16 x 32-1/2" Curbside with Cones

MM00310

Micanan Sliding Door Carriage

Fits model GSD

RV-200

2" Vinyl Insert for Brush Retainer per foot

Color: Black

.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MK-00235

Micanan Flasher 120V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MK-00039

Micanan Overload Reset 1-Phase 10 Amps

MW-00020

Micanan Splash Proof Cover Fully Assembled T TB SD

Splash proof cover for models: PRO-T/TB
Same as MP00251

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

TRMC38E

Telco Light Curtain Bracket 4/pkg

.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

CSA and UL labeled station
Three button O/C/S Nema-7/9
Surface mount

MD-00057

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

OMNI-EXB

LiftMaster Relay Module

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GT-15083-U

Micanan 1-1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

BEA-10EABA

BEA Bracket Accessory for Eagle Artek

225-120R

Electraray Rotating Warning Light Red 120V

Incandescent warning light
90 flashes per minute
Operating temp. 31 to 150 degrees fahrenheit
Height: 7-1/4" Diameter: 5-1/2"
Enclosure rating: Nema4X

.295_5-1/4"-RH

Torsion Spring .295 x 5-1/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 5-1/4"
Length: 12 ft

1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

For 2" thick doors.

32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

Double - Loop
32" long 48" stretch 140 lb load
Springs sold individually

Spec Sheet

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

ME111-4WIRE-M-RH

Miller Edge 4-Wire Monitored Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Worksheet Installation manual Sell sheet

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

Black - for door thickness of 1-5/8"

107999.0001.S

Genie Motor Pulley for Overhead JST

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty