Devanco Canada - Get The Right Garage Door Opener‎ and Parts

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

CORNELL-RS-DOOR

Cornell Rolling Steel Door Made to Order Price by Quote Only

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

29201

Doorlec Transformer 460V pr 120V sec 35VA

460V prImary 120V secondary 35VA

GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 10′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

R-600 Order Form Catalogue Installation Instructions

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

For Maxum op

K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

For Maxum Hoist 1200 Op

K41-0377-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 700)

Maxum T-700

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included

Wireless System Chart

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

FOHMODDC

LiftMaster Front Of Hood Mount Bracket Kit

For use with various LiftMaster® DC JDC and JHDC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
This mounting bracket kit is utilized for front of the hood installation.
Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

Electric motor only with instant reverse

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

E/1907/012

BLG76 Backup Spring Assembly

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

Designed to provide threshold protection during the open state
Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
Adjustments can be made with the BEA remote.
Installation height: 9' max (6'6" to 8' recommended)
Operating temperature: -22 F to 140F
Immune to electrical and radio frequency interference

.......more details

Installation Manual Manuel d-Installation

5001-10-BRONZE

Residential Side & Top Weather-Strip 10' Long - Bronze (FF)

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

K41-0241-000

LiftMaster Transformer for IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

5-30-4

3" Vertical Track 12-GA 9'-3" (10' door) Sold per Pair

Punched track .102 x 112"

OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

10TD900TR

Transmitter 900mhz Touchless Wireless Converter

Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
Microwave doppler technology allows for consistent and reliable detection.
For automatic door apllications.
Compatible with 10RD900 and 10BR2900 receivers.
IP65
Nema 4

.......more details

CAPXSTK

LiftMaster Trim Kit for CAPXS

Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
Provides a clean aesthetic installation helping hide remnants of a previous installation.

E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

Length: 14" Width: 3.6MM (0.140")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

MD-00033

Roller Chain #60 10' per Pack

XF600VAC12

LiftMaster 600V Transformer Kit 1200

For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
will supply a maximum of 12.5 amps on 120volts

JHDC-7S-460

LiftMaster MAXUM Jackshaft 1/2HP 460V 3PH DC Operator 30 Cycles/Hour 700LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

JHDC_Installation-manual JHDC_Manuel-installation Data sheet Fiche Technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

K005-KEY

Replacement Key for 3BXLT Key #5

Replacement key only for key #K005

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

C-flange continuous-duty
For gearhead operator

WHITING-ST

Whiting Strap Mounted Inside Door Option

This is an add-on option when ordering a Whiting door

5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

5-38-11

2" Horizontal Track Set 9'6" (8ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

ME00048

Micanan Keyway 1/4 SQ x 3/4" Long

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
Also known as: 94-50287 K94-50287

50111

LiftMaster Center Support Bracket ATS211X-14 Sold per Unit

For 14 Feet ATS211X CD1014 Rail

MP00107

Micanan Mechanical Load Sensing Mod Left hand

OSH-6214-M-N1-RH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

TDC1222-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #41 chain pack (TDC41-12) ***Actual length 179"***

Double Angle Rails for doors up to 12'6" high
Includes #41 chain pack

TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

Double Angle Rails for doors up to 14'6" high
Includes #41 chain pack

TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

TDC1222-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #41 chain pack (TDC41-10) ***Actual length 155"***

Double Angle Rails for doors up to 8'6" high
Includes #41 chain pack

TDC7-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #48 chain pack (TDC48-14) ***Actual length 203"***

Double Angle Rails for doors up to 14'6" high
Includes #48 chain pack

TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

Double Angle Rails for doors up to 8'6" high
Includes #48 chain pack

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

70600.000

Todco 2" Nylon Sealed WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

GALV-250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Galvanized Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

041D0190

LiftMaster Power Cord RJO

Replacement 6' AC Power Cord
For use with various LiftMaster® and Chamberlain® RJO Series Wall Mounted Garage Door Openers and Light Duty Commercial Door Operators