Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bottom
ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 547
  • Reverse side is #431 Bright White
Colour chart
26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
7001-18-CHARCOL

Commercial Side & Top Weather-Strip 18' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

  • Bars are sold separately.
  • Hardware bag for doors 12' and under
Assembly Manual
0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

  • One tie back chain only
41D7570

LiftMaster Light Lens (41D7572)

  • Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144
744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

  • 8 x 3/4 Pan Socket Tek Zinc
SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

  • Required when ordering pre-cut torsion assemblies with cones
LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation manual
5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
OTBH-6233-1-CON

Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet
801-300-002-00

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz Pre-2016

  • 1000 ft range
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
201-300-301-00

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz. Pre-2016

  • Open/Close/Stop remote for 1 door
  • Range of approx. 1000ft
  • A heavy-duty remote for Industrial applications
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
71-EB208H

LiftMaster External Brake Solenoid 208V with Cable **to extend of inventory

PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • Relay Output
    • .......more details
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

  • This is a Whiting original part
CB116A0500

Cable 1/16" 7x7 500' Galvanized

  • Galvanized cable 1/16" 7x7 500ft spool.
2594

Whiting Bearing Retainer

MG00030

Micanan Limit Cam 1/2-20 UNF

  • Sold seperately. 2 required per operator
4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation instructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

  • Sold in cut lengths per foot.
  • Dual fin
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
E5761-A27

Automatic Systems Arm Shaft Assembly for BL27

  • French description: Ensemble Axe de Lisse
  • For model BL27 gate operator
28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

TAPS1458W

Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer

  • Priced per each
HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Double End Stile
  • Pins and Cotters
    • .......more details
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

  • Black Plastic Knob
  • Formerly 802103 G802103
  • For SW470 with GL or S3 Board
HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters
    • .......more details
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
20109

Doorlec Hoist Spring EHJ

C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600-114
19-5114-NP

LiftMaster Trolley Roller Chain Pack #41 for 14ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

  • Same as G172701
MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-Y-2U-06

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts
MD00045

Micanan Spur Gear 12B72-1

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
102079

Flange Plate PFL6Z PFL206

  • 2 required per bearing # 101475
TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
8087.225.310

Whiting .225 x 2-5/8 IN x 31" Curbside with Cones

  • An original Whiting assembly
ST-PROFILE

Soft Touch Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most standard 1-5/8" retainers
  • 300 feet in a roll
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
Programming InstructionsCompatibility chart
MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

  • Flexible magnetic material with an embossed finish
  • 100 piece contains ten each of numbers 0-9
  • Priced per box
R5202

Pulley 3" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 3/16"
  • Hardened inner race.
MK-00011

Micanan Radio Control Terminal Strip

MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

  • Modification when purchased with an operator
  • #410 CHAIN WITH FRONTIDLER ASSY
  • CHAIN HOIST ASSY
  • HOIST KIT FOR TROLLEY HOIST CHAIN
Drawing
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

  • 5/8" x 10-3/8"
  • Same kit used for HDC except the HDC has 1 extra 5/8" space washer
9150000622

5/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for BG770 BG790
  • Same as 20-1050B-2
PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 72"
  • Dual face-plate allows for easy wire connections
Shop drawing
OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
OPH-6112-ECB-LH

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
EL2000SS

LiftMaster Telephone Entry Access Control System Stainless Steel ***NLA

  • A high-capacity telephone entry access control system designed to complement virtually any gated community.
  • It is flexible enough to be used in apartment buildings condo complexes office parks and commercial sites.
  • features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line making it a great choice for multi-tenant installations
  • Entry Codes allow for 2000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes 1000 card codes 500 entry codes for example •Transaction Monitoring stores a maximum of 8000 transactions including date time identification and transaction type.
  • Activity Reporting gives property managers the ability to print database system and history reports.
  • Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
    • .......more details
Installation ManualProgramming InstructionsInstructions de programmationSell Sheet
6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
MK-00005

Micanan Cut-Out Limit Switch

PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
    • .......more details
Installation Manual
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
5001-16-CHARCOA

Residential Side & Top Weather-Strip 16' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

  • Prevents the 1104 from buckling in the hot sun