Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00073

Programming Instructions

K74-G0589

LiftMaster Hall Effect Sensor

For SL595 gate operator

41A7756

LiftMaster End Panel with Light Socket for 8557

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation Manual Manuel d'Installation Sell Sheet

.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

RELAY022

Manaras Socket Base for TIMER031

8 pin base

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

886LM

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 *** To extent of inventory

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls directly from the control panel
Light run-time is 4 1/2 minutes with adjustable light timer option
On/Off switch for deactivation of motion-detecting function

.......more details

Installation Manual

.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.363_3-3/4"-LH

Torsion Spring .363 x 3-3/4" x 12ft LH Green/White

Wire size: .363
Inside diameter: 3-3/4"
Length: 12 ft

.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft

.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 1-3/4"
Length: 12 ft

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
Visor clip and battery CR2032 included

Programming Instructions Instructions de programmation

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 6"
Length: 12 ft

.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.218_1-3/4"-RH

Torsion Spring .218 x 1-3/4" x 12ft RH Yellow/Orange

Wire size: .218
Inside diameter: 1-3/4"
Length: 12 ft

.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

.192_1-3/4"-RH

Torsion Spring .192 x 1-3/4" x 12ft RH Silver

Wire size: .192
Inside diameter: 1-3/4"
Length: 12 ft

12563

Doorlec Upper Brake Shoe - Right

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

Will work on most brands of commercial trolley operators using 2" angle tracks.

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

6589

WhitingBrush Side Seal assembly for insulated doors

Fits Coldsaver and Tempguard

2234.396

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with seal and retainer *** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

Activates two 318MHz MegaCode receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

Programming Instructions

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

15.1

Whiting Truck Door Stainless Steel Center Hinge

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

2" with 5/8" Offset
For use with Light Brush or Vinyl Insert

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1014-1-5/8-12'

Rigid Vinyl Bottom Retainer Notched 12' Long

Black - for door thickness of 1-5/8"

1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

For 2" thick doors.

1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

For 2" thick doors.

1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

For 2" thick doors.

1003-1-3/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual fin vinyl

1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual fin vinyl

1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual-fin vinyl

1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual-fin vinyl

1001-12-GREY

Commercial Side & Top Weather-Strip 12' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

Double - Loop
32" long 48" stretch 240 lb load
Springs sold individually

Spec Sheet

32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

Double - Loop
32" long 48" stretch 150 lb load
Springs sold individually

Spec Sheet

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-140

Extension Spring 7' Door - 140 lbs Blue

Double - Loop
25" long 42" stretch 140 lb load
Sold individually
Same as part number 114
Rated for 10000 cycles

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

95-00115

Truck Door Rivet 1-1/8" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0036

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02214

Truck Door 2" Vertical Track and Right Angle Assembly 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details