Devanco Canada - Get The Right Garage Door Opener‎ and Parts

H12G12-SS

Hinge #12 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

Assembled by manufacturer

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

#48 x 47 pitch with master link

7220355

FAAC 400 Front Fitting

K72-34818

LiftMaster Limit Shaft Kit SL575/585

Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.

41A2770-17

LiftMaster Hardware Kit for 8550 8160W

Universal Hardware bag for LiftMaster 8550 8160W Operator.

.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

510.3228.07

Whiting Double End Hinges DF Mild/Nylon - 7 Panel Door Add-On Option

dd-on option when ordering door.

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

Comes with 3/4" bushing and 2 1/4" spring pins

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** NLA No Replacement

Base mount

K75-34790

LiftMaster Disconnect Kit for SL585

Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle

Installation Manual

7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

Replacement board for fire door model FDCL

G658056

LiftMaster Counterweight for BG790 Arm

For 17' gate arm and up
For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M

25-2008

LiftMaster 8 Amp Overload Fuse

For models: SL585-100-21 SL858-100-81 SL595-100-21 SL595-100-81 SL575-100-21 SL575-100-81

2376.162_18.750

Whiting Torsion assembly .162 wire size 18" spring length 75" shaft

GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-03-R

Green Hinge #3 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

Complete brake assembly including 460V solenoid
Solenoid cover is sold separately # MM00011

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

K1D8080-1CC

LiftMaster Expansion Board for LA500DC

K72-12493

LiftMaster Limit Switch Kit

Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
For logic control MT BMT MJ MH MHS

HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

Protects system to -40F.
Installs into the operator frame

.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 2-5/8" Length: 12 ft

.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

OTBH-6432-ECB

Manaras Trolley Operator 1/2 HP 480V 3 Ph with Electronic Circuit Board

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

Installation Manual Sell Sheet

OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation Manual Sell Sheet

MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

Gearbox for GH operator

K77-12486

LiftMaster Parts Box for Model MT/ BMT

RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

029C98290

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98290

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 90" h
Price varies according to size

26-94625

Truck Door Top Panel (15" x 98") for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

26-94623

Truck Door Top Panel (13" x 98") for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

K72-19974

LiftMaster Output Shaft Kit

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

Installation Manual

2705.171_250

Whiting Curbside Torsion Spring 2-3/16" ID 25" Long

Torsion spring wire only
.171 wire size

510.3920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 6 Panels

Upgrade option

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

13-3510*

LiftMaster Chain Guide ***NLA

This is NLA as a part by itself but may be purchased in a kit K75-18493

K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

K74-31243

LiftMaster Kit SVC MOV

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

For model: 8550

.283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

Replacement torsion spring with cones for Whiting Door Serial # 138631
Specs: .139 x 2-3/16" x 14" Long
Curbside
For Roadside order part #2806.139*140

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.393_5-1/4"-LH

Torsion Spring .393 x 5-1/4" x 12ft LH Orange

Wire size: .393
Inside diameter: 5-1/4"
Length: 12 ft

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.331_5-1/4"-LH

Torsion Spring .331 x 5-1/4" x 12ft LH Red/White

Wire size: .331
Inside diameter: 5-1/4"
Length: 12 ft

.295_5-1/4"-LH

Torsion Spring .295 x 5-1/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 5-1/4"
Length: 12 ft

.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.343_2-5/8"-LH

Torsion Spring .343 x 2-5/8" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft

.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032

.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 6"
Length: 12 ft

.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft

8331.96

Whiting Brush Top Seal assembly 96"

Fits Coldsaver and Tempguard

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

RS1034

Roller 3" Steel 4" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 3.38"
Overall length: 4.75"
Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)

510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

Upgrade option only - must accompany a door order

STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

Reinforcement bar 2-1/4"

SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

K75-12586

LiftMaster Complete Brake Assembly GH 575V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.