Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carlo Gavazzi
K72-19974-RB

LiftMaster Output Shaft & Sprocket

  • Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers
TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00035

Micanan Overload Reset 1-Phase 6 Amps

MK-00346

Micanan Relay 12 VAC 8-Pin Plug-In

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

  • LC2K1210B7 mini contactor
MK-00141

Micanan Transformer 220V-24V-100VA

MK-00057

Micanan Transformer 460V-115V-50VA

MV-00214

Micanan Tele 8" Wand (For Utility Switch)

MM-00295

Micanan Wall Mounting Plate (Reducer 120)

MK-00931

Micanan Single Btn Mini Transmitter ** Discontinued

HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

OSH-6434-ECB-LH

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
50740

Doorlec On/Off Switch 575V 3Ph Gate Op

  • 20amp
.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-J-7523-U-LH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

CP-HU-TC3-34-575/3

Lynx TC3 Medium-Heavy Duty Trolley Op. 3/4 HP 575V 3P Contactor Style

.319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
PRO-APT-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO ATPE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7538-U

Micanan 3/4HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5043-U

Micanan 1/2HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
60-7244

Econo Caution Sign French 14" x 10"

SC-6

Wheel Chock SC-6 Aluminum

  • Excellent Surface Grip on Tire and Ground
  • Lightweight Aluminum
  • Size: 6" wide x 6-1/2" long x 6" high
60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
CBI-29

Wheel Chock CBI-29 Cast Ductile Iron

  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
BPPB1758

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 96"(8')

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

MP-00204

Micanan Splash Proof Covers PRO-H J HHD GH GHC (Fully Assembled)

drawing
PRO-APTB-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #2 point = shorter cutting edge (more thread)
CAPACITOR031R

Manaras Capacitor 324-389uf incl. Bleeder Resistor

MM00447

Micanan Idler Wheel PRO-APTC

ME00071

Micanan Idler Shaft PRO-APTC

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

AC636

Aluminium Threshold AC6 x 36" (3')

.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

MK-00787

Micanan Heater Probe 120V 20W Brass Fitting Field Install

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

HINGE-911-PCG

Powdercoated Hinge #9 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #9 - 0.89 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
Z9211-3

Stationary Cone Tool 3-3/4"

  • Easily dislodges the cone from the torsion spring
MM00008

Micanan Frame GHC MSI0034

MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

108135.0003

Overhead Serpentine V- Belt for JST 26"

  • Overhead Door commercial garage door opener serpentine belt 108135-0003 included in the "speed-up" kit for sidemount only
  • Type "J" 26"
.331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 220 lb load
VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** NLA - USE MEDIUM OAK

  • Pan head
VWS-34-CHARCOAL

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Charcoal

  • Pan head
  • S point
PRO-HHD-5083U-RH

Micanan 1/2HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
7-19-1

Lock Bar Guide Only

MOD060-12FT-MAX

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
MP-00002-460V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
MP-00002-230V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
OGH-6533-CONT

Manaras 3/4 HP 600V 3Ph Gear Head Operator Contactor Model

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
MGH-6214-CONT-RH

Manaras 1 HP 240V 1P Jackshaft Contactor Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

MU33-2WIRE-LH-Y

Miller Edge MU33 2-Wire NM Left Hand Yellow - Sold per Foot

  • MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
  • Must specify the exact length in feet and inches when ordering.
  • Mounts vertically or horizontally
  • Sensitivity: nominal 8-13 ibf
Worksheet
PRO-GHC-10021U-R

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
Installation manualSpecification sheet
OPH-6532-ECB-LH

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
ME113-4WIRE-E

Miller Edge Black End Outlet 4-Wire Monitored 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
WorksheetInstallation manualSell sheet
26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
MK-00172

Micanan Non-Resetable Analogue Counter 24V

  • Monitors door cycles
CUSTOM-8X40SC100

Devanco Loop 8 x 40 Saw-Cut 100' Lead-In

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation manualManuel d'installationLoop placement guideGuide de positionnement des boucles
VBELT_5L370

Manaras VBelt 5L 37" - repl. by B34

  • 5L370
MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

  • Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
.283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MK00708

Micanan Varistor Harness 230V with Blue Wires

MM00158

Micanan Solenoid Lever HR Left

070032-0000

Overhead Double Drive Pulley

MK00642-NM

Micanan Full Feature Circuit Board with Contactor Interface Non-Monitored 575V (MK00737)

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

PRO-TB-10083-U

Micanan 1 HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
GM-809

Gear Master

  • Holds shaft assembly for easy removal of roll pins
  • Makes changing gears easy