Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CPS-UN4G

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4 Black

Waterproof photoeyes.
Monitored Thru Beam Photocell
For direct connect on HCT

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

4059GY-216

Garex Thermo Moulding 3/4" Beading Gray 18ft

White and Black also available

785105

FAAC XP30 Photocells 30m Range Relay 785163

Hardwired pair of Photocell relays
30m Range
IP54
24v
Dimensions: 55 L x 78 H x21 D mm

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

9150000630

1/4" Stops ONLY 100/pkg

Stops only - 100 per pack

.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 2HP Motors

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

DS75-SEAL

Bottom Seal for DS75 Mini Storage Door Grey

The seal is available in 100-foot rolls but we are selling it by the foot for your convenience.
These seals help prevent wind and weather from having an effect on the interior of the garage.
Blade astragal

.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitor and Control the opener from anywhere using mobile devices.
Consume up to 75% less power in standby mode.
Soft Start/Stop for smooth operation.
Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.

.......more details

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure Receiver Logic Board Conversion List

21702

Doorlec Close Auxiliary Switch Double Limit DAT

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GAREX-TRACK

Garex Steel 26 ga Special Order

Special order to suit customer's needs

T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

Open/Close remote for 2 doors
Battery 12V included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P220-2K

Programming instructions

ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

Misc. code for all special order items

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

620-00993

Linear Heater Kit 230V

Heater kit for slide gate operator 230V

9-24-1

Lynx BarLock Mounting Plate

Assembly Manual

ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 523
Reverse side is #431 Bright White

Colour chart

5001-16-BLACK

Residential Side & Top Weather-Strip 16' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

One tie back chain only

WD-327310

Wayne Dalton 3-Btn Mini Transmitter 372 MHz 3973

Keychain Model but also comes with a Visor Clip
Homelink Compatible
Size: 2-1/2"" x 1-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3014 3018 3514
Quantum: 3214 3314 3316 3414
ALL I-Drive Models

.......more details

24-230-5

Relay 3 PDT 230V 7A

208/230VAC relay
Used in BG770 gate operators

28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

21-7460-1

LiftMaster Transformer 230/460V 3 PH

2B639

LiftMaster Speaker for EL25 (41B0639)

1B0639

PBTL3-RED

Replacement Button Only - N/C Stop Red

Stop switch and rubber cover for PBTL-3

BK021/PR-BOLT

Commercial 3" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 1/4"
Maximum door weight: 1650 lbs Zinc
Plated Steel
Sold as a pair

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge

2B735

LiftMaster Main Board EL25 (041B0735)

Same as 041B0735

19-5812-NP

LiftMaster Trolley Chain Pack #48 for 12ft Door Nickel Plated

Chain pack only

CT501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

37030A

Genie Motor Assembly DC

Works with Genie ReliaG 800 2022 2024 and 2042
Replacement powerhead motor assembly

17-2701

LiftMaster Pulley 7" x 5/8" (G172701)

Same as G172701

T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

Open/Close remote for 1 door
Dip switch led 9V battery and metal clip
Compatible with Allstar 1 button T-931 and T-931-M
New style transmitter case

124844

1" Nylon Bushing

MD-00034

Micanan Connecting Link #410

BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

Foundation box for Big-Metro gate operator
Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

Z9205

Door Scale Arm

Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
Set door on shaft and multiply scale reading times 5 to give you the door weight
Bathroom scale not included

Drawing

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

Installation manual Manuel d'installation Sell sheet Brochure

CP-LX100

Lynx Control Board with Cover for UL325 models

For all voltages

Programming instructions

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

Maximum hi-lift: 164"
Capacity: 800 lbs per drum
Cable length: Floor to shaft center 181" minus amount of Hi-Lift
Cross reference: DNS 410-164 OMI 164HL M162-4165

G71-26438

LiftMaster Timer-to-Close Factory or Field Install

Compatible with models VSL595 BG770 and BG790
Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
May be factory or field installed
Same as 71-26438 G7126438

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

Provides impact protection to vertical track
11 gauge (.125 thick)
Galvanized steel no paint

UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

6-9/16" overall length
5" hole center to center distance

CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

Galvanized cable 1/8" 7x7 500ft spool.
A higher quality cable than the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

Prevents the 1104 from buckling in the hot sun

84284

Marantec Logic Board for Non-EOS Models

For use on M Line- M-4500 and M-4700 models.
For use on Q Line - 7500 and 7700 models.
For use on Martin DC 3500E and DC 3700E models.
Replaces 8054216. Special programming needed. Instructions included

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

Replacement arm only - no stripes old style

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

41ASWG-438SA

LiftMaster Motor with Limit Switch Harness for LA400

Electric motor for LA400

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

4J

Rolling Steel 3" Curved Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

Upgrades added when purchasing a commercial operator

.312-6-RH-C

Torsion Spring .312 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 6" Length: 12 ft

.306-5-1/4-RH-C

Torsion Spring .306 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 5-1/4" Length: 12 ft

.306-3-3/4-RH-C

Torsion Spring .306 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 3-3/4" Length: 12 ft

.306-2-LH-C

Torsion Spring .306 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 2" Length: 12 ft

.283-2-5/8-RH-C

Torsion Spring .283 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2-5/8" Length: 12 ft

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.283-1-3/4-RH-C

Torsion Spring .283 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 1-3/4" Length: 12 ft

.273-2-5/8-RH-C

Torsion Spring .273 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 2-5/8" Length: 12 ft

.243-3-3/4-LH-C

Torsion Spring .243 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .243 ID: 3-3/4" Length: 12 ft

.243-2-LH-C

Torsion Spring .243 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .243 ID: 2" Length: 12 ft

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

Wand only
Requires CS101 (Carsense-101)

.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

BK307

Jamb bracket J-07 #7 12 gauge

Sold by the piece
Height 3.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

109B33

LiftMaster Trolley Belt Clip

50680

Doorlec Clutch Assembly for LJH

801-300-002-01

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz New Generation

1000 ft range
2016+
This receiver will accept 8 Equinoxe O/C/S remotes
Nema 4

Programming Instructions Instructions de programmation

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

860LM

LiftMaster Universal Weather Resistant Receiver

Weather-resistant for outdoor mounting requirements
Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
Compact design fits most gate and commercial door operators
Compatible with 811LM 813LM and all MAX remote controls

.......more details

Programming Instructions Instructions de programmation Sell Sheet

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet

41A5389-1E

LiftMaster Receiver Logic Board

For low profile screw drive models with one light
Fits models 2110 2220

Replacement Instructions

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Availble

APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
APT operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login