Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MH00009

Micanan Flange Bearing 1" ID x 2" OD

2 required per operator

MA117

LiftMaster Counterweight for Arms 15ft & Up

MK00642

Micanan Smart 10.0 Full Feature Circuit Board with Contactor Interface Monitored 575V

For all HP - 575V all voltages 1.5 2 3 & 5HP

Instructions Manual

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-05-R

Green Hinge #5 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

HBFST-BC

Keyed Control Switch with Best Cylinder

NEMA 1
TAMPERPROOF FLUSH MOUNT
TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
CENTER RETURN
SINGLE GANG BACK BOX
STAINLESS STEEL FACEPLATE

.......more details

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

27-48-340

Extension Spring 8' Door - 340 lbs Blue

Single - Loop
27" long 48" stretch 340 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-160

Extension Spring 8' Door - 160 lbs Brown

Single - Loop
27" long 48" stretch 160 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

014D1270D

1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

Thermal replacement glass only

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

9003-11FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 11' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

71-10345

LiftMaster RPM Sensor Board (MT only)

PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original
Cable drum and bearing

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

A Whiting original
Cable drum and bearing

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original

SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

Used on Proline residential garage door openers

.331-6-RH-C

Torsion Spring .331 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

.319-2-5/8-LH-C

Torsion Spring .319 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 2-5/8" Length: 12 ft

.312-6-LH-C

Torsion Spring .312 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 6" Length: 12 ft

.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

.234-2-5/8-RH-C

Torsion Spring .234 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2-5/8" Length: 12 ft

RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles for a 12' door
Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.

CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
Available in a five wire (recommended for use with GTO operators) and a three wire version.
The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications

.......more details

Installation Manual Sell Sheet

1715.20

Whiting Stainless Steel 2-Hole Grab Handle

CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Brake not included.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

Fits the Miracle-One gate operator

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

C-334-INSTALLED

Cones 3-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF375

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

K22-36900

LiftMaster Triple Phase Brake Solenoid L5

SEL2641R433K8PM

Erone 800 User Receiver 433MHz

Multi-user receiver
800 two-channel transmitters + 7 master transmitters
Includes 1 master transmitter S2TR2641E2M for programming
12/24V AC/DC
Option: PC software kit # SEL2641KITP8 sold separately
1 NO relay + 1 NO/NC relay

.......more details

Installation manual Wireless System Chart

50430

Doorlec Push-Button Station 2 Button Nema 4/12

Open / Close Nema 4/12

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

OGH-6235-ECB

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6534-ECB

Manaras 1 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

ase mount

Wiring diagram for 120V Wiring diagram for 230V

OPH-6114-ECB

Manaras Opera-H 1 HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

Replaces CLUTCHPAD002

OPJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

014D1065G

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

Axial Load: 950 LBS
Screw length: 1/4"
Screw type: Socket set screw
Solid steel collar with set screw

34538R

Genie Up Limit Switch Assembly 66" Wire

For up direction on a ChainGlide System using magnetic limits
For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
Also for Overhead Door Python ChainGlide garage door openers
66" inches of wire attatched

6062

Programmable Timer *** To Extent of Inventory

12VDC or 24VDC operation is selectable
Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
LED indicates relay is energized
Form C relay contacts are 8 amp at 120VAC / 28VDC

Installation instructions

804

Fasteners Sleeve Anchor 3/8" x 4" 50/Box

Secure anchoring into concrete brick or block

OSH-6114-ECB

Manaras Opera-SH 1HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

Replacement actuator arm for single gate applications

Installation Manual Manuel d'installation Sell Sheet Brochure

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

Powers gate from AC power-120V or 220V single phase.
Ideal for applications that prefer AC transformer run operator vs. battery run operator
Ideal for areas that experience temperatures below -4 F for extended periods

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

MD-00029

Roller Chain #41 Sold by the Foot

LEVER065

Manaras Brake Lever

H8064HCLL

Polycarbonate Hinged Enclosure Clear Cover Locking Latch

Dimensions: 8 x 6 x 4
Stainless Steel locking latch
Nema 4X

37408

Doorlec Reversing Contactor BF9 120VAC

MA031

LiftMaster Adapter Collars 2/Pkg

For use with Mega-Arm padded arm

MOTOR274-WIRED

Manaras Electric Motor 3/4HP 575V 3PH Wired

Motor and brake come wired •This item is compatible with BRAKE011

ME00028

Micanan Input Shaft Heavy-Duty

BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

Heater used in BG type gate operators

Installation Manual

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

SSZP15-1

Solid Shaft 1" Keyed Zinc Plated 15'-1" ** to extent of inventory

MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 75

41B4103

LiftMaster Service Belt Tensioner

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-8-SANDSTNE

Commercial Side & Top Weather-Strip 8' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)