Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MP-00025

Micanan Auxiliary Chain Hoist for Jackshaft Op. / PRO-J (SCHAUX)

Allows for operation of a door by an auxiliary chain hoist.
Used primarily on center mount applications

MK-00051

Micanan Overload Reset 3-Phase 3.7 - 5.5 Amps

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

350g can

PRO-APTB-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010-8FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 8ft SSR Rail (1608LM) ***No Longer Available

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA500DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Manuel d'installation Installation manual Sell Sheet Brochure

CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

Limit cam / limit nut

41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
Works with 41A5034
Same as: 041B0873 41B873

OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX4.S GIDFX4.S

029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 105" h
Price varies according to size

CRBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

36051R

Genie Replacement Carrage Assembly

For Genie belt drive garage door opener model 2040L

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

MK-00605

Micanan Double Limit Switch

MK00641-NM

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored with 5 Relays (MK00736)

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays
Up to 20 transmitters can be programmed

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

720118

FAAC Latching Plastic Enclosure

Dimensions: 4.65" x 8.38" x 0.6"

PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
Full adjustment from 2 to 24VDC if required
Maximum 3 amp (Output at 70 deg. F and free air)
Regulation:97.5%
Maximum input voltage 36 volts
Fuse protected

.......more details

Wiring Diagram / Diagramme de raccordement Specifications / Spécifications

LM21XP

LiftMaster Extended Performance Fire Door Release Device

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing

HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Fits Most Overhead Sectional Doors
Priced Per Each

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

CP-LX100

Lynx Control Board with Cover for UL325 models

For all voltages

Programming instructions

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

108D34

LiftMaster Light Lens K108D0034

Compatible with models 1270 1280 1280R
Fits older chain drive models with 2 lights: 1250 1265 320WD 1260LK 220WD 1260LK 220WD 1355

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

Open-Close-Stop
Dimensions: 7" h x 2-3/4" w x 3-1/2" d
Exterior surface mount

3BLM-BC

29-17A3CO

LiftMaster Safety-Pack for N7 Operators

Intrinsically safe control circuit
K160-0192 is a Safety Relay Service Kit for various LM commercial ops

K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

Standard 1/2 hp motor

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

27-48-100

Extension Spring 8' Door - 100 lbs Tan

Single - Loop
27" long 48" stretch 100 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

For models MT BMT MJ mechanical operators
Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

BOARD066R

Manaras Replacement Power Board ***No Longer Available

Used on all Manaras circuit board type operators

Installation Manual Manuel d'installation Replacement Chart Guide de remplacement

OPH-6113-CONT-R

Manaras Opera-H 3/4HP 120V 1Ph with Mechanical Contactor Right Hand *** To Extent of Inventory

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

Brackets are predrilled
Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
Made of metal
Sold as a pair
9" x 3" L-Shaped

41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

Fits square trolley rail only
Same as 183A163

1110197

LiftMaster Take Up Bolt 3/8"-16

Measures 3-15/16" Long
Also known as: G115015 1110197 115015 11-10197

VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

Same as part number #19052

TR490

Waist-High Pedestrian Tripode Turnstile with Heater & Pictograms

The TR tripod turnstiles are very robust products that can function equally well inside and outside buildings.
They are particularly well-suited to the needs of access control at leisure centers stadiums and factories.
Well-built for increased durability tripod turnstiles efficiently control high throughput.
Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space
Non-removable stainless steel arms to prevent vandalism
Durable corrosion-resistant heavy-duty mechanism for extended service life

.......more details

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.

Programming Instructions Sell sheet

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look

1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Galvanized steel
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 2-3/16" maximum
Good for use with 3" hardware

PRO-W_MOD

Micanan Nema 4/12 Modification

This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

#48 chain size
Price reflects cost if purchased with an opener

.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

HAE00001

Linear Wall Station

Wired wall station with light and lock features.
For LSO LDO LCO

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-12FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 12' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-18FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 18' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond
Full case quantity only (12).

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

H11G01

Hinge #1 x 11 gauge

11 gauge hinge #1 - 0.61 lbs
Bright zinc-plated
For use with 7/16" stem rollers
Item code # 224185

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

HBS23LU

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Single End Stile Sold per Pair

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For Low-Headroom Track
For 2" or 3" Doors
Fits 2" or 3" Track
Single End Stile

.......more details

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

Activates one MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

Works on GH/GHX

MYQ-KH1VXXW

LiftMaster Smart Garage Video Keypad Power Adapter Kit

Worry-Free Operation: Plug in using the 25-foot power cord for uninterrupted monitoring.
Never needing to charge or replace batteries means your garage is always accessible and secure.
Easy Installation: Set up in minutes with minimal tools required
Whole-Garage Visibility: Use the adjustable swivel mount to position your Video Keypad for maximum visibility.
See more of what you want and thanks to the discrete and concealable power cord see less of what you don’t.
Extended Reach: Position your Smart Garage Video Keypad wherever you want it and use the 25-foot power cord to connect to any standard outlet.

.......more details

D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

BMA3

NICE Release with Lever for Newer Big Metro Ops

PB-001

Skylink Garage Door Wall Button

Install the Skylink Wall Button inside your garage.
Allows manual operation of your garage door opener.
Illuminated LED indication.
Easy to Install.
30-foot Wire Included.
Mounting Hardware Included.

.......more details

TM1-PLUS

Programmable Timer

6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
Microprocessor based / controlled clock for accuracy of 2%
Operates on a power supply of 12vdc or 24vdc
SPDT relay output : 5 amp 24vdc contacts

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included