Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.

Programming Instructions Sell sheet

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

R5209

Cast Iron Pulley 4" **** Indef Delivery

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles

026-G019

Blue Giant Proximity Sensor M30 M12 Connector

(30mm Unshielded) Home/Lip Sensor

WRAES

Erone Raduim 2-in-1 AES128 Wireless Receiver 433MHz

The WRAES is a 2-in-1 AES128 encryption receiver.
It works either in stand-alone or connected to an access control system (Wiegand output).
Compatible with any high-security AES128 RADIUM wireless remotes it was designed to prevent remote cloning.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remotes.
Stand-alone mode: 500 transmitters

.......more details

1-0243

RW Stay Roller 153 Galvanized

For use on #31 square track

111-0060

RW Box Track #33 Black 8ft Up to 700lbs

Finish: Black enamel

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

2500-1495

Linear Pushbutton Stop/Reset

Z9408

Coupler 1" Bore Adjustable Black 170634

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.50"
Painted black

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 10′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

R-600 Order Form Catalogue Installation Instructions

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

5M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M5BAR Barrier Gate

Bar assembly comes with:
XBA5
XBA13 -- RUBBER IMPACT PROTECTION STRIP
WA10 -- RED ADHESIVE REFLECTIVE STRIPS
SPGAP06400A – NYLON INSERT KIT
PD1614B0000

.......more details

GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

1 curbside horizontal track

2400-501

Linear Retaining Ring

MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

Green (Open) Red (Mushroom Stop) Black (Close) push-button station

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
Dimensions: 6.15” x 4.13” x 4.74”

GALV-375-6-144-RH

Torsion Spring .375 x 6" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

GALV-273-258-144-R

Torsion Spring .273 x 2-5/8" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

50-19503

LiftMaster Push to Open Bracket

Allows the gate to swing away from the property
To be used with LA400 and LA412 gate operators

Installation manual

RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

Steel Roller Wheel diameter: 3"-C 6203 bearing
Roller Head Only

SETR2641AM1AN-C

Erone 1-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with grey buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

7-6111

RW Hanger 323S Truck & Pendant Sold Individually

Size: 323S
Truck: Same as 323 Hamger
Pendant: 1/2" diameter Steel Zinc Plated
Fasteners: (1) 5/8" washer (1) 1/2" hex nut (1) 1/2" locking nut
Capacity: 1 pair for maximum door weight of 400 lbs
Shipping weight: 1-1/2" lbs

.......more details

CGH753L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Damp Environment Modification

K07-8007

LiftMaster Arm Hub for BG770/790

Also known as: G078007 07-8007 078007

CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CarWash Modification

LAP

Linear External Antenna Kit LA-P AAE00366

Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
Omni-directional external antenna
Antenna connector mounts inside case wire whip extends outside case
Compatible with EXA-1000 external antenna
Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.

.......more details

345.000

Whiting Tongue & Groove Bottom Panel Assembly with Seal/Channel Made to Order. Price on Request

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

OSH-6233-M-N1-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

Compatible with LiftMaster® Model SL585U Slide Gate Operators

MTS1

Linear 1-btn MegaCode Transmitter 318 MHz (DNT00091)

Activates one 318 MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming instructions Instructions de programmation

1440-1-3/8"-WHT

Elton Residential Window for Flush Doors 1-3/8" thick 1440 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 42 5/16” x 14 1/4"
Cut-out size: 41 11/16” x 13 11/16”
Vision area: 39 11/16” x 11 5/8”
Different glass options and frame colours are available upon request

.......more details

CBC14

Thimble 1/4" - 100 per pkg

OVERLOAD041

Overload Reset 3-Phase 5.5 - 8.0 Amps

CT753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 with Carwash Mod

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
This operator comes with the carwash modification already installed

.......more details

69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

Fits Serial #30662431-1

K001D8116-1

LiftMaster Power Board 3ph 230/460/575V L5 N4/4X

Complete kit includes: 3PH power board and standoffs required for installation

7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

Used with #461-0004 track

19-40100-SS

Roller Chain #40 Stainless Steel 100ft Pack

100ft length Stainless Steel

BCH501L5L-BZ

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. LH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

RDOF-311-1/2

Doorlec RDOF Rolling Curtain Fire Door Op. Compact Design w/ECB 1/2 HP 115V 1PH

Comes with Mounting Plate for Front of Hood Mount

MH00002

Micanan Mild Steel Bushing 9/32" ID x 13/32" OD x 1-1/16" (Brake Option) *** No Longer Available

EHJ-383-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 208V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

GH-343-1.5

Doorlec Industrial Jackshaft Door Operator 1.5 HP 460V 3-Phase

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

2 N/O contacts and 1 N/C contact for stop.
Flush mount.

K12-8032

LiftMaster Flange Bearing 4-Bolt 1-1/2"

Also known as: 128032 12-8032 G128032
For use with LiftMaster® Models BG770 and BG790 Barrier Gate Operators.

KCIEN-SBP

DigiCode Illuminated Keypad with Controller Built-in

Illuminated stainless steel keypad
100 user codes (4 to 6 digits)
2 form C outputs (6A/250V) timed (1 to 99 sec.) or latched
Audible feedback buttons
Request-to-exit input
Potted electronics

.......more details

02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

Surface mount

TRACK-SET-2-134-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

91567

Marantec Sprocket Holder Assbly Standard Belt Rail

Compatible with Belt Standard Rail
For Marantec belt opener models: Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo M50 M55
Not for use on the heavy duty 1.2mm - 18 gauge rails
Measures 5"x2-3/4"x1-1/4"

5009-429-PAINT

Aluminum Touch Up Paint Nail Polish Style Ice White / Blanc Glacier #429

Glass bottle and brush applicator

5009-525-PAINT

Aluminum Touch Up Paint Nail Polish Style Black / Noir #525

Glass bottle and brush applicator

K87-E-118

LiftMaster E-Ring Idler Shaft

Also known as: 87E118 87-E-118 G87E118
Commonly used with LiftMaster® SL595 Series; and various Commercial Slide Gate Operators

21-35057

LiftMaster Transformer 460V 24VAC 40VA

575V PRIMARY 24V SECONDARY
Same as K21-35057

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

GEAR004

Manaras Plastic Gear for MDJ/MDT

White plastic gear with 2 holes to accept COUPLING001

2200-306

Linear Clutch Spring HSLG

Used on various Linear Gate operators

E/BLOP/148

Automatic Systems Safety Edge for BL229 11'-6 (EABLOP/148)

Q410

LiftMaster Surge Protector K70-51060

Most commonly used with LiftMaster® SL3000 & CSW200 Models.

EHJX-311-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 115V-1Ph ** Price on Request

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
Explosion proof EEMAC 7/9

CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

WHITING-ALUMCLAD

Whiting Special Order Aluminum Clad Roll Up Door Price by Quote Only

Special order to customer's specs
A prepainted aluminum facing added to plywood core dry freight door
Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
2" track and rollers for durability.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.

.......more details

8030279

Marantec Replacement Belt with Tab for 8ft Door

Overall Belt Length = 250"
Travel limit tab attached to belt
For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced

106-0006

Rodent Block Pull Chain Seal 2.5"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

XBA6

NICE LED Arm Light Kit 6M

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

Modification kit for in-field upgrades
Hand chain sold separately

LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details