Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-HHD-10043U-L

Micanan 1 HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP 460 volt 3 phase Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn open/stop/close (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation
Enough Hoist hand chain (MR00006) included for 16’ high standard sectional door
Sealed ball bearings on the output and intermediate shafts roller bearings on clutch shaft
Solenoid Actuated Brake drum brake for quiet reliable braking
Variable Door speed
2 Year warranty
Shipping weight 110lbs

Installation Manual Specification Sheet

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

PRO-HHD-10083U-L

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

.......more details

Operating Instructions

PRO-HHD-5023U-R

Micanan 1/2HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

PRO-HB-7525U-LH

Micanan 3/4HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

K77-34846

LiftMaster Hardware Kit SL575 SL585 SL595

T2-HBAG

Manaras Trolley Hardware Bag

Various fasteners

PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5043U-RH

Micanan 1/2HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5023U-LH

Micanan 1/2HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-RH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

CLIP020

Manaras Pocketwheel Roller Clip

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

PRO-J-10023-U-RH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

S2TR2681E2

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart

VBELT_4L300

Lynx VBelt 4L 30"

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00141

Micanan Transformer 220V-24V-100VA

MK-01155

Micanan Transformer 460V-24V-50VA

MK-00142

Micanan Transformer 115V-24V-50VA

MK-00228

Micanan Transformer 230V-24V-50VA

MM-00127

Micanan Wall Mounting Adapter Plate (Reducer 63/80)

MM-00332

Micanan L-Bracket Right Angle Front of Coil For Cornell Rolling Steel Doors

MV-00027

Micanan 110V Commercial Receiver CR32-110V

A transformer 110/24V (MK00030) is supplied separately for the 110V version

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

In closing cycle door will stop for 0.5 seconds and reverse to fully open

MK-00059

Micanan Timer 7 Day/24hr Economical

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

Screw-on wire connector
Wire Range: 22-10 AWG
Rating: 105C (221F)
Voltage: 600V
Approval: CSA UL 486C Listed

MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

Provides added strength to the belt drive system

MV-00240

Micanan Key Switch ON/OFF w/Best Core Cylinder Nema 4 Surface Mount

MV-00022

Micanan Pull Cord SPST Nema 7/9

MV-00010

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

Surface mount
Metal Housing

MV-00007

Micanan Single Button Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic Enclosure
Double Pole Contacts
Dimensions: H=3-1/4"" W=2-3/4"" D=2-1/2""

MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

For PRO-LTB LJ LH LHAB

DM-100

Skylink Swing Door Opener with Electro-Magnetic Lock ***NLA

Can be installed on most doors including wood and metal doors.
Hit and Stop feature ensures safety operation.
Fail safe operation - Door can be open/close freely during power outage
Optional audio warning as an indication when the swing door opener is operating
Can learn up to 16 remote controls

SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

MD-00425

Sprocket 60B18 x 1" Bore 1/4" KW

SPR60B18X1

Sprocket 60B18 x 1" Bore 1/4" KW

Same as MD00425

RA-HOIST

GDI RA Chain Hoist/Brake 'BCR' N4/Flr Levl Dscnct N4 Field Install

Can be added in the field

PRO-J-10081-U-RH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.437-514-R

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

PRO-J-7523-U-RH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

MDI0016

Sprocket 50B28 x 1-1/4" 1/4" KW 2SS

PRO-J-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

140g

.393-334-L

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

.273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-APTB-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10023-U

Micanan 1 HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-TB-7521-U

Micanan 3/4HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7244

Econo Caution Sign French 14" x 10"

60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

CC-07

Wheel Chock CC-07 Cast Aluminum Alloy

Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

CP-SH-58-1212

Lynx Clutch Shaft Only for MCJH 5/8" x 12-1/2"

No pulley

RELAY039

Manaras Relay 3-Pole 24VAC

K10-33850

LiftMaster E-Box Cover MH MJ MT

LR110LTB3815

Telco Thru Beam Receiver M12

Remote receiver Series 110
M12 x 1 Housing Size
Nickel Plated Brass Housing Material
15 m Cable Cable Connection
IP 67 Sealing Class

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

203301

ELMON Safety Relay Rail 34-32 230VAC/24VAC/DC 1-Channel w/Testsignal

For DIN-rail mounting

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
Sign up with your preferred carrier or add on to your current plan.
Avoid trenching and wire pulling for speedy installations.
Eliminate plain old telephone service (POTS) and improve reliability.
Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
Capacity: Connect up to 4 wired or multiple Wi-Fi devices

.......more details

MM00284

Micanan Disconnect Arm PRO-HHD MSI0277

SPUR_GEAR

Spur Gear For Holdown Assembly

SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

Ratchet Bar Not Included
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

Standard 5" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-1

Standard Riser Bracket for 6" Above Dock or Less 1"

Standard 1" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MK00594

Micanan Auxiliary Contact Block 100FA40

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

ME00071

Micanan Idler Shaft PRO-APTC

LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

Drawing

TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login